Alpine KCX-C2600B Universal Front and Rear Camera Selector
Alpine KCX-C2600B interface gives you the ability to switch between Alpine Direct front- and rear-view cameras (not included) using an aftermarket car stereo, a factory radio, or a monitor with an RCA input — a great help for parking, towing, and more. The included two-button controller lets you take advantage of multi-view functionality: rear, panorama, corner, and ground selectable views.
Dual Multi-Camera Selector Interface
Alpine KCX-C2600B Multi-Camera Selector Interface allows as many as two cameras (including an Alpine front & rear camera or Alpine front and other brand of rear camera) to be connected to an Alpine or other brand of in-dash multimedia/navigation receiver with a composite video camera input.
Two-Button Wired Controller
Alpine KCX-C2600B comes with a two-button wired controller. Pressing the “ON/OFF” button of the wired controller will display an image of the front camera and what is ahead of the vehicle, replacing the current display (the reverse camera is activated by putting your vehicle in reverse gear). Press the “MODE” button to toggle through the various viewing modes from the camera (when connected to a compatible Alpine multi-view camera). The controller can be mounted on your dashboard using two-side tape for easy access. It features an attached cable that plugs into the multi-camera selector interface module.
Alpine KCX-C2600B Dual Multi-Camera Selector Interface has one composite video output for connecting to an Alpine or other brand of in-dash multimedia/navigation receiver with a composite video camera input. It can also be used with some factory in-dash receivers and monitors, if a factory-to-composite video adapter (sold separately) is available for a particular vehicle.
This mode displays an image of the area behind the vehicle. Use this when backing into a parking space.
This mode displays a general perspective of what is ahead of the car. Use this when you want to check mainly ahead of the car.
This mode displays a divided image left and right of center. Use this mainly when checking left and right directional view.
This mode displays an image from above down to the lower section of the car. Use this when to determine the car’s position in relation to the curb, etc