Alpine X-S65 X-Series Speakers – 2 Pairs | X-A90V X-Series 5-Ch Amp | R-SB10V Pre-Loaded 10-inch Sub | SK4641 Amp Installation Kit – Bundle
This Bundle Includes:
(2) Alpine X-S65 X-Series 6.5″ Coaxial 2-Way Speakers
(1) Alpine X-A90V X-Series 5-Channel Power Density Amplifier
(1) Alpine R-SB10V Pre-Loaded R-Series 10-inch Subwoofer Enclosure
(1) Stinger SK4641 4-Gauge 4000 Series Car Amplifier Installation Kit
Alpine X-S65 X-Series 6.5″ Coaxial 2-Way Speakers – Pair
The Alpine X-S65 is priced and sold as a pair.
Top-form Alpine sound
If you’ve been an Alpine devotee from car to car, their X-Series speakers are your opportunity to take the leap to premium sound. Designed with a laser-focus on superior imaging, these 6-1/2″ 2-way car speakers will bring out the very best in your audio system. And an all-new magnet design in a cast aluminum frame allows these speakers to have a low profile, so they fit in a wide array of vehicles.
All about the build
Alpine uses a powerful magnet and a super-efficient motor structure to make this 6-1/2″ speaker really strong in the lower frequencies. The woofer cone itself uses a specialized fiber for extreme rigidity while Alpine’s proprietary High Amplitude Multi-Roll surround ensures durability in the face of extreme temperatures.
Handles up to 110 watts
A 1″ carbon graphite dome tweeter handles the high frequencies with satisfying accuracy, and its extended frequency response lends a sense of realism and atmosphere unmatched by lesser tweeters. Driven by an aftermarket amplifier, you’ll really have a soaring system, thanks to power handling up to 110 watts RMS.
Warning: This product contains a high performance tweeter. If there is a tweeter already installed in your car, then you must disconnect its terminals. If you leave the original tweeter connected and connect this product in parallel, then a fault may develop in this product, so you are strongly recommended not to do so.
Alpine X-A90V X-Series 5-Channel Power Density Amplifier
There are three new X-Series power density amplifiers: the 5-Channel Alpine X-A90V , the Mono X-A90M and the 4-Channel X-A70F. Key advancements include:
A new Class D circuit design that maintains Alpine’s leadership in Class D Performance:
< 20 degree phase shift, which is class-leading in high-end 12V automotive amplifiers
Low THD: 0.015%
Wide frequency response: 50khz Range
High signal-to-noise ratio: 90dB at 1W
Damping factor > 1500DF
A new thermodynamically engineered heat sink, for more efficient heat dissipation and reliable operation
New 4-channel, 8-guage speaker connectors for easier connection to multiple subwoofer and speakers
The new X-Power amplifiers are now all digital. The successors of Alpine’s popular V-Power series, they employ various PDX amp technologies for impressive power and bass performance. These digital powerhouses are so efficient, they’re much more compact than you expect. Advanced thermal protection means you can play them loud and the music never stops.
Alpine ID is Alpine’s philosophy to achieve the ideal listening experience through sound imaging. In order to create the perfect sound stage, Alpine focuses on engineering optimized system components that work together to allow users to perceive the location of each instrument and vocalist during the studio recording session, thereby letting the listener experience the music as it was intended by the artist.
The vehicle’s environment makes it difficult to experience a realistic sound stage. Alpine ID addresses these challenges by creating a new benchmark for in-vehicle sound performance, with a focus on these areas:
Amplifier Phase Shift and Damping Factor: Phase shift affects the arrival time of sound frequencies, resulting in an unnatural sound stage. The new Alpine ID products have an unprecedented high damping factor for maximum electrical control of speakers to prevent distortion, with minimum phase shift for ideal imaging.
Speaker Detail and Dynamics: A wide frequency response is necessary to reproduce the upper harmonics that translate to musical detail, depth of image and other spatial cues. Leading edge cone materials and linearized high magnetic motor strength are utilized in order to reproduce a new level of realism.
Subwoofer Localization: Subwoofers with high THD (total harmonic distortion) are easy to localize in the vehicle, resulting in poor imaging. In order to increase output while reducing THD and maximizing transient response, the new subwoofers have increased control throughout the entire power range.
Alpine’s top-of-the line X-Series of amplifiers, speakers and subwoofers are the first products redesigned to meet the Alpine ID spec. They are built from the ground up and designed to be used together to achieve the best sound imaging. Alpine’s R-Series and S-Series products will be rebuilt to the Alpine ID spec over the next few years, so products from all three series will eventually have a sound imaging DNA identified as unmistakably Alpine.
Alpine R-SB10V Pre-Loaded R-Series 10-inch Subwoofer Enclosure
Enclosure Stacking Features
The Alpine R-SB10V subwoofer 10-inch enclosure is available as a single or “linked” format with an optional mounting bracket. This innovative design allows the sound consumer the option to easily add more bass to their system.
The ported enclosure design delivers a higher total sound output for deep, powerful bass, reliable sound reproduction and overall great sound quality. The 10-inch enclosure is tuned to 36 Hz while the 12-inch enclosure is tuned to 35 Hz for optimized performance with Alpine’s S-and-R-Series subwoofers.
Remote Bass Level Control Anywhere
Bass levels can be controlled with the RUX-H01 Remote Bass Knob for Halo (sold separately). The knob can be mounted to any 9-inch or 11-inch Halo screen or anywhere in the vehicle for quick bass level adjustments.
The RUX-H01 is compatible with Alpine amplifiers and is multi-amp capable (standard phone cable splitter required) and can adjust the gain from 0 to -12 dB. The bass knob is designed to match the aesthetic of the Halo displays and subwoofer enclosures. The smooth tapered edges and silver finish provide a premium look that compliments the Halo displays.
Stinger SK4641 4-Gauge 4000 Series Car Amplifier Installation Kit
This Stinger SK4641 4000 Series 4-Gauge Power and Signal Wiring Kit is designed specifically for car audio systems up to 1,500 watts or 150 amps. It includes everything you need for installation including power wire, ground wire, remote turn-on wire, fuse holder, fuse, ring terminals and mounting hardware. Do the job perfectly with Stinger!
- 4000 Series, 4-channel audiophile grade interconnects
- Made from 100% oxygen-free Copper for a pure uninterrupted transfer of power
- Tru-Spec cables/wires
- Tinned conductors for corrosion resistance
- Mini-ANL (MIDI) Style Fuse Holder (SPD5801) for Maximum Power Delivery and Safety
- Matte finish hyper-twist wire construction provides excellent flexibility
- Pre-terminated power connections provide reliable performance