Audio-Technica VM520EB/H Dual Moving Headshell Cartridge Combo Kit

$239.99

Allow 1-4 Days Shipping Special Order
Condition: New

Audio Technica VM520EB/H Dual Moving Headshell Cartridge Combo Kit

  • VM dual-magnet cartridge with 0.3 x 0.7 mil elliptical stylus
  • Aluminum cantilever
  • Paratoroidal coils improve generating efficiency
  • Center shield plate between the left and right channels reduces crosstalk
  • Durable low-resonance polymer cartridge housing
  • Universal ½”-mount headshell for 4-pin turntable cartridges

In stock

Free Shipping
SKU: VM520EB/H Category:

Product Description

Audio Technica VM520EB/H Dual Moving Headshell Cartridge Combo Kit

The Audio Technica VM520EB/H combo kit includes the VM520EB elliptical bonded dual moving magnet cartridge premounted on the AT-HS10BK universal 1/2″-mount headshell.

The Audio Technica VM520EB is part of the 500 Series in Audio-Technica’s new VM cartridge line – a line that harks back to A-T’s early days as a manufacturer primarily of high-end phono cartridges, while also incorporating today’s advanced technology. Like all VM cartridges, the Audio Technica VM520EB is equipped with dual magnets that are positioned to match the left and right channels in the stereo record groove for outstanding channel separation and extended frequency response. The cartridge’s 0.3 x 0.7 mil elliptical bonded stylus tracks the record groove with high accuracy for outstanding audio reproduction. Includes mounting hardware.

A fine cartridge and headshell combo

The Audio-Technica VM520EB/H pre-mounts the VM520EB cartridge in an AT-HS10BK universal 1/2″-mount headshell. The cartridge has two moving magnets inside, matching the left/right separation of a stereo record groove. The elliptical bonded stylus tracks record grooves with high accuracy for outstanding audio reproduction. It’s designed to fit a standard 1/2″ mount for compatibility with a wide range of turntables.

Dual Moving Magnet Stereo Cartridge:

 The VM520EB conical stylus cartridge is the entry-level 500 Series model in Audio-Technica’s new VM cartridge line. Like all VM cartridges, the VM520EB is equipped with dual magnets that are positioned to match the left and right channels in the stereo record groove for outstanding channel separation and extended frequency response. The cartridge’s 0.3 x 0.7 mil elliptical bonded stylus tracks the record groove with high accuracy for outstanding audio reproduction.

  • VM dual magnet cartridge with 0.3 x 0.7 mil elliptical stylus
  • Aluminum cantilever
  • Paratoroidal coils improve generating efficiency
  • Center shield plate between the left and right channels reduces crosstalk
  • Durable low-resonance polymer housing

VM520EB Cartridge:

  • dual moving magnet design for excellent stereo separation
  • center shield plate between left and right channels reduces crosstalk
  • 0.3 x 0.7 mil elliptical stylus
  • all-metal cantilever
  • frequency response 20-23,000 Hz
  • output voltage: 4.5 mV
  • stereo separation: 27 dB
  • channel balance: 1.5 dB
  • tracking force range: 1.8-2.2 grams
  • recommended tracking force: 2.0 grams
  • load impedance: 47k ohms
  • 11/16″W x 11/16″H x 1-1/8″D
  • cartridge weight: 6.4 grams

AT-HS10 Headshell:

  • lightweight aluminum 1/2″-mount headshell
  • finger lift is positioned near the front of headshell to enable precise placement of stylus
  • gold-plated lead wires resist corrosion to ensure good signal transfer
  • 13/16″W x 1/2″H x 2″D
  • weight: 0.4 oz.

Additional Information

General Specifictions

– Frequency Response 20-23,000 Hz
– Channel Separation 27 dB (1 kHz)
– Vertical Tracking Force 1.8-2.2 g (2.0 g standard)
– Stylus Construction Bonded round shank
– Recommended Load Impedance 47,000 ohms
– Output 4.5 mV (at 1 kHz, 5 cm/sec)
– Channel Balance 1.5 dB (1 kHz)
– Stylus Shape 0.3 x 0.7 mil elliptical
– Cantilever Aluminum pipe
– Mount Half-inch
– Replacement Stylus VMN20EB

– Coil Impedance: 2,700 ohms (1 kHz)
– DC Resistance: 800 ohms
– Load Capacitance: 100-200 pF
– Coil Inductance: 460 mH (1 kHz)
– Static Compliance: 35 x 10-6 cm/dyne
– Dynamic Compliance: 8 x 10-6 cm/dyne (100 Hz)
– Vertical Tracking Angle: 23° Dimensions (Cartridge): 17.3 mm (0.7″) H x 17.0 mm (0.7″) W x 28.2 mm (1.1″) D
– Weight (Cartridge): 6.4 g (0.2 oz)
– Dimensions (Cartridge & Headshell): 21.3 mm (0.8″) H x 21.0 mm (0.8″) W x 60.4 mm (2.4″) D
– Weight (Cartridge & Headshell): 16.8 g (0.6 oz)
– Accessories Included: Four cartridge installation screws (5 mm x 2, 10 mm x 2), two washers, two hexagon nuts

– Coil Impedance: 2,700 ohms (1 kHz)
– DC Resistance: 800 ohms
– Load Capacitance: 100-200 pF
– Coil Inductance: 460 mH (1 kHz)
– Static Compliance: 35 x 10-6 cm/dyne
– Dynamic Compliance: 8 x 10-6 cm/dyne (100 Hz)
– Vertical Tracking Angle: 23° Dimensions (Cartridge): 17.3 mm (0.7″) H x 17.0 mm (0.7″) W x 28.2 mm (1.1″) D
– Weight (Cartridge): 6.4 g (0.2 oz)
– Dimensions (Cartridge & Headshell): 21.3 mm (0.8″) H x 21.0 mm (0.8″) W x 60.4 mm (2.4″) D
– Weight (Cartridge & Headshell): 16.8 g (0.6 oz)
– Accessories Included: Four cartridge installation screws (5 mm x 2, 10 mm x 2), two washers, two hexagon nuts

Estimated Shipping

When you add an item to your cart the Estimated Shipping* cost will be shown.  This estimated shipping* cost is accurate to most major city locations across Canada.  If the shipping cost is higher than the estimated shipping* then GibbysESM will contact you for approval before we process your order.

To learn more click Shipping Terms & Conditions

Audio Technica 1 Year Limited Warranty.

Reviews

There are no reviews yet.

Be the first to review “Audio-Technica VM520EB/H Dual Moving Headshell Cartridge Combo Kit”