Denon AVR-X6700H​ 11.2 Ch. 8K AV Receiver with 3D Audio, HEOS Built-in and Voice Control

11.2

8

3

Specifications
Audio section
Power amplifier
Rated output:
– Front: 140 W + 140 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.05 % T.H.D.)
175 W + 175 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
– Center: 140 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.05 % T.H.D.)
175 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
– Surround: 140 W + 140 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.05 % T.H.D.)
175 W + 175 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Surround back / Height1 / Height2 / Height3/Front wide:
140 W + 140 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.05 % T.H.D.)
175 W + 175 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
– Dynamic power: 160 W x 2-channel (8 Ω/ohms)
250 W x 2-channel (4 Ω/ohms)
– Output connectors: 4 – 16 Ω/ohms
Contents Connections Playback Settings Tips Appendix
Front panel Display Rear panel 342 Remote Index

Analog
– Input sensitivity: 200 mV
Frequency response: 10 Hz – 100 kHz — +1, –3 dB (Direct mode)
S/N: 102 dB (IHF–A weighted, Direct mode)
– Distortion: 0.005 % (20 Hz – 20 kHz) (Direct mode)
Rated output: 1.2 V

Digital
– D/A output: Rated output — 2 V (at 0 dB playback)
Total harmonic distortion — 0.008 % (1 kHz, at 0 dB)
S/N ratio — 102 dB
Dynamic range — 100 dB
Digital input: Format — Digital audio interface
0 Phono equalizer
– Input sensitivity: 2.5 mV
– RIAA deviation: ±1 dB (20 Hz to 20 kHz)
– S/N: 74 dB (IHF-A)
– Distortion factor: 0.03 % (1 kHz, 3 V)

Video section
Standard video connectors
– Input/output level and impedance: 1 Vp-p, 75 Ω/ohms
– Frequency response: 5 Hz – 10 MHz — 0, –3 dB

Color component video connector
– Input/output level and impedance: Y signal — 1 Vp-p, 75 Ω/ohms
PB / CB signal — 0.7 Vp-p, 75 Ω/ohms
PR / CR signal — 0.7 Vp-p, 75 Ω/ohms
– Frequency response: 5 Hz – 60 MHz — 0, –3 dB

Tuner section [FM] [AM]
(Note: μV at 75 Ω/ohms, 0 dBf = 1 x 10 –15 W)
– Reception frequency range: 87.5 MHz – 107.9 MHz 520 kHz – 1710 kHz
– Effective sensitivity: 1.2 μV (12.8 dBf) 18 μV
– 50 dB sensitivity: MONO ― 2.8 μV (20.2 dBf)
– S/N ratio: MONO ― 70 dB (IHF–A weighted, Direct mode)
STEREO ― 67 dB (IHF–A weighted, Direct mode)
– Distortion: MONO ― 0.7 % (1 kHz)
STEREO ― 1.0 % (1 kHz)

Wireless LAN section
– Network type (wireless LAN standard): Conforming to IEEE 802.11a/b/g/n
(Wi-Fi® compliant)
– Security: WEP 64 bit, WEP 128 bit
WPA/WPA2-PSK (AES)
WPA/WPA2-PSK (TKIP)
– Used frequency range: 2.4 GHz, 5 GHz
The Wi-Fi® CERTIFIED Logo and the Wi-Fi CERTIFIED On-Product Logo are registered trademarks of the Wi-Fi Alliance.

Bluetooth section
– Communications system: Bluetooth Specification Version 4.2
– Transmission power: Bluetooth Specification Power Class 1
– Maximum communication range: Approx. 98.4 ft/30 m in line of sight z2
– Used frequency range: 2.4 GHz
– Modulation scheme: FHSS (Frequency-Hopping Spread Spectrum)
– Supported profiles: Receiver function
A2DP (Advanced Audio Distribution Profile) 1.2
AVRCP (Audio Video Remote Control Profile) 1.5
Transmitter function
A2DP (Advanced Audio Distribution Profile) 1.2
Corresponding codec: SBC
Transmission range (A2DP): 20 Hz – 20,000 Hz
The actual communication range varies depending on the influence of such factors as obstructions between devices, electromagnetic waves from microwave ovens, static electricity, cordless phones, reception sensitivity, antenna performance, operating system, application software etc.

General
– Operating temperature: 41 °F – 95 °F (5 °C – 35 °C)
– Power supply: AC 120 V, 60 Hz
– Power consumption: 750 W
Power consumption in standby mode: 0.1 W z
Power consumption in CEC standby
Mode: 0.5 W
When “Network Control” in the menu is set to “Off In Standby” and “HDMI Pass Through” is set to “Off”.

– Dimensions (Unit : in. (mm)): 17.1 (434) – 9.2 (237) – 15.5 (393)
– Weight : 32.6 lb (14.8 kg)