Definitive Technology DI 6.5STR In-Ceiling Speakers | DI 6.5STR Rough-in Brackets – Bundle
This Definitive Technology DI 6.5STR bundle includes:
(8) Definitive Technology DI 6.5STR In-Ceiling Speakers
(8) DI 6.5STR Rough-in Brackets
Definitive Technology DI 6.5STR In-Ceiling Speakers
Definitive Technology DI 6.5STR is a “stereo” speaker, both left and right channels are fed into a single speaker. Dual angled tweeters disperse the sound in broad area to approximate the spaciousness of two speakers. The STR is the perfect solution in spaces where you want sound but where using two speakers is not practical or economical-such as hallways, kitchens, bathrooms and offices.
The DI 6.5STR is a “stereo” speaker, both left and right channels are fed into a single speaker. Dual angled tweeters disperse the sound in broad area to approximate the spaciousness of two speakers. The DI 6.5STR is the perfect solution in spaces where you want sound, but where using two speakers is not practical or economical-such as hallways, kitchens, bathrooms and offices.
Pivoting Aluminum Dome Tweeter with Waveguide
The DI Series in-wall/in-ceiling loudspeaker uses two Definitive Technology’s proprietary ceramic-coated annealed aluminum 0.75″ dome tweeters. The DI 6.5R tweeters are post mounted, and the tweeters’ housing is specially smoothed and shaped to use it as an extremely effective low-diffraction waveguide. The aluminum dome tweeters features a pivoting design which allows you to focus the sound toward or away from your listening area depending on the application.
The DI 6.5STR uses a 6.5″ BDSS driver for wide-bandwidth accurate frequency response, broad dispersion, low distortion, and maximum detail retrieval. The 6.5″ BDSS driver cone is supported by specially tuned soft rubber surrounds at both the outer and inner edges. The double surrounds allow the cone to have longer excursion without distortion. As bass output is a function of both a cone’s diameter and excursion, the higher excursion BDSS system brings the benefit of higher bass output from smaller drivers. The DI 6.5STR’s 6.5″ BDSS driver has the bass output and dynamic range of a typical 8″ driver.
Definitive Technology 6.5STR Rough-in Bracket – Pair
The Definitive Technology DI 6.5R Rough-in Bracket and DI 6.5STR Rough-in Bracket has adjustable arms to attach the bracket to studs or joists before the drywall goes up.
The center rings are fabricated from heavy duty painted stamped steel. There are no sharp metal edges to cut an installer’s hands and they are ultra rigid, so that when drywall is laid over and cut the brackets will not bend or break. The center ring requires a 7.3125″ diameter cutout.
The metal mesh mounting arms snap onto the center ring in a variety of positions to cover almost any installation. The wings can be attached with nails, staples or screws; and can be bent and easily trimmed with tin snips. They are also thin enough to make stud notching simple. The wire tie loop easily breaks away when the speaker is installed.