Furman BB-RS232 BlueBOLT Ethernet Connectivity Adapter

$364.99

Furman BB-RS232 Ethernet Adapter

  • Control individual outlets or outlet banks.
  • Monitor your devices and power status.
  • Receive email alerts for power events.
  • Schedule tasks such as power on, off, cycling, and sequencing.
  • Manage multiple devices in your chain of devices.

In stock

Free Shipping
SKU: BBRS232 Category:

Product Description

Furman BB-RS232 Ethernet Adapter

The Furman BB-RS232 BlueBOLT Ethernet Connectivity Adapter provides Ethernet connectivity to BlueBOLT-supported Furman Sequencing products that are otherwise only capable of RS-232 communication.

Furman BB-RS232 Adapter Bluebolt Ethernet to D9 RS232 Product Description The BB-RS232 Adaptor provides Ethernet connectivity to BlueBOLT-supported products that are otherwise only capable of RS-232 communication. Once the adaptor is connected between the BlueBOLT supported product (via RS-232) and the site’s Local Area Network (via Ethernet), the product can communicate with Furman’s BlueBOLT servers. Features •Control individual outlets or outlet banks •Monitor your devices and power status •Receive email alerts for power events •Schedule tasks such as power on, off, cycling, and sequencing •Manage multiple devices in your chain of devices •Utilize device-specific features for your compatible product Warranty Information 2 Years Std Parts & Labour.

The Furman BB-RS232 BlueBOLT Ethernet Connectivity Adapter provides Ethernet connectivity to BlueBOLT-supported products that are otherwise only capable of RS-232 communication. Once the Furman BB-RS232 BlueBOLT Ethernet Connectivity Adapter is connected between the BlueBOLT supported product (via RS-232) and the site’s Local Area Network (via Ethernet), the product can communicate with our BlueBOLT servers.

Communication Ports

RS-232 with DSUB 9 Male connector. Pins 2 (RXD), 3 (TXD) and 5 (COM) are used for communication, pins 1 (GND) and 9 (+12V) are used for power.

100BaseT Ethernet Communication with BlueBOLT service or a control system on the Local Area Network.

Indicators

For BlueBOLT connected, Status, Ethernet Link Status, and Data Activity.

Reset Button

Short press of Reset causes the Furman BB-RS232 BlueBOLT Ethernet Connectivity Adapter to reset the device. Holding down Reset for >10 seconds causes adaptor to revert to its default setting.

Power

Powered through non-communication signal wires of supplied 9-conductor cable (for RS232 port) or with included wide-range AC/DC switched-mode wall adaptor.

Mounting

Capable of being mounted to the rear equipment rack rail via its flange holes and supplied rack screws or on side of the equipment rack via the flange holes and zip-ties (not supplied).

 

Additional Information

Weight0.75 kg
General Specifications

General
– FamilySequencers
– Line Voltage120 (Volts)

BlueBOLT EnabledYes
– AC Protection
– Automatic Voltage ShutoffNo

Shipping Info
– Length8 (Inches)
– Width6.4 (Inches)
– Height3.8 (Inches)
– Weight1.65 (Lbs)

Unit of MeasureEach
– UPC050616008891
– Master Pack Qty24

Other Specifications
– Networking10/100Base-T Ethernet, RJ-45 Jack.
– RS-232 PortDSUB 9 Male connector.
– Pins 2 (RXD), 3 (TXD) and 5 (COM) are used for communication, pins 1 (GND) and 9 (+12V) are used for power.
– Ethernet Port100BaseT Ethernet Communication with BlueBOLT service on the Local Area Network.
– PowerPowered through non-communication signal wires of supplied 9-conductor cable (for RS232 port) or with included wide-range AC/DC switched-mode wall adaptor.
– Dimensions1’ H x 2.5’ W x 4’ D

Estimated Shipping

When you add an item to your cart the Estimated Shipping* cost will be shown.  This estimated shipping* cost is accurate to most major city locations across Canada.  If the shipping cost is higher than the estimated shipping* then GibbysESM will contact you for approval before we process your order.

To learn more click Shipping Terms & Conditions

Furman 3 Year Limited Warranty

Reviews

There are no reviews yet.

Be the first to review “Furman BB-RS232 BlueBOLT Ethernet Connectivity Adapter”