Toll Free 1.866.696.7189
Local 289.275.1050

Furman M-8X2 8 Outlet Power Conditioner and Surge Protector

Model M-8X2 UPC 654061028307 Category

Save $29.00 $ 144.00 $115.00

Furman M-8X2 8 Outlet Power Conditioner and Surge Protector

• AC noise filtering
• Spike & surge protection
• 8 rear panel outlets and 1 front panel outlet
• 15-amp rating, with circuit breaker
• Rear outlets spaced to accommodate even the bulkiest of wall warts and adapters

Special Order

Availability: In stock

Free Shipping

QUESTIONS?

Please feel free to contact us!

Save $29.00 $ 144.00 $115.00

Finance with 12 equal monthly payments and 0% interest. *Estimate $137 /month +taxes   → Learn More

Furman M-8X2 8 Outlet Power Conditioner and Surge Protector

• AC noise filtering
• Spike & surge protection
• 8 rear panel outlets and 1 front panel outlet
• 15-amp rating, with circuit breaker
• Rear outlets spaced to accommodate even the bulkiest of wall warts and adapters

Special Order

Availability: In stock

Free Shipping

Questions?

Give us a call toll free 1-866-696-7189
Send us an email Gibbys@Gibbysesm.ca

Questions?

Give us a call toll free 1-866-696-7189 Send us an email support@Gibbysesm.ca

Furman M-8X2 8 Outlet Power Conditioner and Surge Protector

Like its Merit series predecessor, the Furman M-8x, the Furman M-8×2 power conditioner is an ideal low-cost AC power solution for any rackmount system, just in a chassis that is 3.5″ shorter. The 1U M-8×2 also has eight switched AC outlets in the rear panel to power and protect all your audio equipment with up to a 15-amp load.

The Furman M-8×2 power conditioner protects your electronic equipment by combining high voltage varistor (MOV) surge and transient suppressors. The fast-acting suppression circuit quickly responds and clamps transient voltages to safe levels. An RFI/EMI interference filter works to prevent and suppress noise from fluorescent lights, certain dimmers, radio transmitters, and similar sources of electronic pollution from contaminating the AC line and from there, leaking into sensitive audio, video, or computer circuits. The Furman M-8×2 power conditioner is NRTL/TUV listed.

Furman’s got your back

The M-8×2 is part of Furman’s Merit Series: solutions for people who need dependable power protection without spending a bundle. Install an M-8×2 in the top slot of your rack, and the eight outlets in the rear panel will power and protect your equipment. It’s only 3-3/4″ deep, so it fits easily even in shallow racks.

At the radio station where I dee-jay a couple of shows, the main equipment rack in the air studio has multiple CD players and a mixer, all plugged into a Furman M-8×2. The station operates 24/7 and reliable power protection is absolutely essential. That’s why they chose Furman.

When it comes to AC power, don’t learn the hard way

You’ve got a rack loaded with your processors, effects units, and more… and you’re going to plug that into the wall? Really? One big spike and your gear is toast. Don’t put your trust in wall AC, or the false security of a $5 power strip. Furman’s legendary protection circuitry defends your gear from the spikes and surges that are so common at gigs and practice spots.

As a bonus, the M-8×2 includes Furman’s effective RFI/EMI filtration, which can deliver quieter audio without the buzz and crackle that often comes along for the ride with unfiltered power sources.

Features:

• AC noise filtering to reduce radio frequency and electromagnetic interference (RFI/EMI)
• Spike & surge protection ensures equipment stays safe and your power stays clean
• 8 rear panel outlets and 1 front panel outlet
• 15-amp rating, with circuit breaker
• Front panel indicator LED lets you know that your equipment is being protected
• Rear outlets spaced to accommodate even the bulkiest of wall warts and adapters

Model M-8X2
Model: M-8X2
Product: Furman M-8X2 8 Outlet Power Conditioner and Surge Protector
Weight 0.00 kg
Specials

Estimated Shipping

When you add an item to your cart the Estimated Shipping* cost will be shown.  This estimated shipping* cost is accurate to most major city locations across Canada.  If the shipping cost is higher than the estimated shipping* then GibbysESM will contact you for approval before we process your order.

To learn more click Shipping Terms & Conditions

Furman Canada 3 Year Limited Warranty

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Recently Viewed Products

Furman M-8X2 8 Outlet Power Conditioner and Surge Protector

Like its Merit series predecessor, the Furman M-8x, the Furman M-8×2 power conditioner is an ideal low-cost AC power solution for any rackmount system, just in a chassis that is 3.5″ shorter. The 1U M-8×2 also has eight switched AC outlets in the rear panel to power and protect all your audio equipment with up to a 15-amp load.

The Furman M-8×2 power conditioner protects your electronic equipment by combining high voltage varistor (MOV) surge and transient suppressors. The fast-acting suppression circuit quickly responds and clamps transient voltages to safe levels. An RFI/EMI interference filter works to prevent and suppress noise from fluorescent lights, certain dimmers, radio transmitters, and similar sources of electronic pollution from contaminating the AC line and from there, leaking into sensitive audio, video, or computer circuits. The Furman M-8×2 power conditioner is NRTL/TUV listed.

Furman’s got your back

The M-8×2 is part of Furman’s Merit Series: solutions for people who need dependable power protection without spending a bundle. Install an M-8×2 in the top slot of your rack, and the eight outlets in the rear panel will power and protect your equipment. It’s only 3-3/4″ deep, so it fits easily even in shallow racks.

At the radio station where I dee-jay a couple of shows, the main equipment rack in the air studio has multiple CD players and a mixer, all plugged into a Furman M-8×2. The station operates 24/7 and reliable power protection is absolutely essential. That’s why they chose Furman.

When it comes to AC power, don’t learn the hard way

You’ve got a rack loaded with your processors, effects units, and more… and you’re going to plug that into the wall? Really? One big spike and your gear is toast. Don’t put your trust in wall AC, or the false security of a $5 power strip. Furman’s legendary protection circuitry defends your gear from the spikes and surges that are so common at gigs and practice spots.

As a bonus, the M-8×2 includes Furman’s effective RFI/EMI filtration, which can deliver quieter audio without the buzz and crackle that often comes along for the ride with unfiltered power sources.

Features:

• AC noise filtering to reduce radio frequency and electromagnetic interference (RFI/EMI)
• Spike & surge protection ensures equipment stays safe and your power stays clean
• 8 rear panel outlets and 1 front panel outlet
• 15-amp rating, with circuit breaker
• Front panel indicator LED lets you know that your equipment is being protected
• Rear outlets spaced to accommodate even the bulkiest of wall warts and adapters

Model M-8X2
Model: M-8X2
Product: Furman M-8X2 8 Outlet Power Conditioner and Surge Protector
Weight 0.00 kg
Specials

Estimated Shipping

When you add an item to your cart the Estimated Shipping* cost will be shown.  This estimated shipping* cost is accurate to most major city locations across Canada.  If the shipping cost is higher than the estimated shipping* then GibbysESM will contact you for approval before we process your order.

To learn more click Shipping Terms & Conditions

Furman Canada 3 Year Limited Warranty

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Need Help?
Get Expert Support

1-866-696-7189

Call us Toll Free
Email Us

Get Expert Advice

Need Help?
Get Expert Support
1-866-696-7189

Call us Toll Free

Email Us

Call us Toll Free

preloader