Furman P-8-PRO-C Classic Series Power Conditioner

Sale!
Save $110.00

$ 575.00 $465.00 (Sale ends on Aug 14, 2018)

Furman P-8-PRO-C Classic Series Power Conditioner

  • 20 Amp Rating
  • Nine Outlets
  • BNC Lamp Connector
  • Wall Wart Spacing
  • Uses NEMA 5-20p Plug Connector

In stock

Free Shipping

Product Description

Furman P-8-PRO-C Classic Series Power Conditioner

The Furman P-8-PRO-C is a Classic Series Power Conditioner in a sturdy rack-mountable design. It can be utilized as a voltage surge suppressor for instrument rigs, recording studios, DJ setups, live sound installations, and more. The P-8 Pro C power conditioner has the following three stages of protection: Series Multi-Stage Protection (SMS), Linear Filtering Technology (LIFT), and Extreme Voltage Shutdown (EVS). Together they provide a comprehensive transient voltage surge suppressor system to protect your gear. There are several other built-in features of the P-8 Pro C such as the 20 Amp rating, nine total AC outlets, a BNC lamp connector on the rear panel, isolated outlet banks, three widely spaced wall wart outlets, and LED diagnostic lights.

Instrument Rigs

The Furman P-8-PRO-C Power Conditioner defends your gear from the spikes and surges that are so common at gigs and practice spots. With its Linear Filtering Technology, you’ll get a quieter tone without pops, crackles, and the local radio station coming out of your amp

Recording

It can lower the noise floor caused by the dirty AC power coming into your console or DAW. Furman’s Series Multi-Stage Protection keeps your sensitive digital equipment from acting funny or burning up due to everyday spikes and surges

DJ Equipment

Bars, clubs, and other event venues have some of the most unpredictable power out there. From air compressors turning on and off to light shows pulling current loads up and down, the AC power can be a strain on the circuits in your rig. The Furman P-8-PRO-C Power Conditioner keeps the bad stuff out

Pro Audio

When you’re out there gigging, you never know what kind of power you’re going to get. Whether you’re setting up a show at the local club or powering up the church band for their next service, make sure you give them the power they can trust

Additional Information

Specifications

General
– Maximum Current: 20 A
– Operating Voltage: 90 to 140 VAC
– Over Voltage Shutdown: 140 VAC typically
– Spike Protection: Line to neutral, zero ground leakage
– Spike Clamping Voltage: 188 Vpk @ 3,000 A (133 VAC RMS)
– Maximum Surge Current: 6,500 A
– Frequency: 50/60 Hz
– Noise Attenuation: 10 dB @ 10 kHz, 40 dB @ 100 kHz, 100 dB @ 10 MHz. Linear attenuation curve from 0.05 – 100 ohms line impedance
– BNC Connector With Switch: Rear rack lamp, 12 VAC 500 MA max (lamp not included)
– Power Consumption: 12 W
– Safety Agency Approval: CSA UL1449, CE, NRTL-C
– Dimensions (W x D x H): 19 x 10.5 x 1.75″ (48 x 27 x 4.4 cm)
– Weight: 11 lbs (5 kg)

Packaging Info
– Package Weight: 12.3 lb
– Box Dimensions (LxWxH): 21.8 x 14.6 x 4.1″

Estimated Shipping

When you add an item to your cart the Estimated Shipping* cost will be shown.  This estimated shipping* cost is accurate to most major city locations across Canada.  If the shipping cost is higher than the estimated shipping* then GibbysESM will contact you for approval before we process your order.

To learn more click Shipping Terms & Conditions

Furman Canada 3 Year Limited Warranty.

Reviews

There are no reviews yet.

Be the first to review “Furman P-8-PRO-C Classic Series Power Conditioner”