Hertz MP25.3 1.14″ 120W Tweeters

Brand: Hertz
Model Number: MP25.3
UPC: 8018823113939
Model Number: MP25.3
UPC: 8018823113939
Free Shipping

Save $40.00

$209.99

$249.99

|

OR

|

Payments as low as

$17.50/mo

PayBright
Special Order

Availability: IN STOCK

Hertz MP25.3 1.14″ 120W Tweeters

  • Geometry with a “Center Tuning Duct” for a lower resonance frequency and less harmonic distortion
  • Flux with a high density Magnet made of neodymium, tuned for maximum control during high-energy dynamic transients in the mid-high frequency band
  • Mobile voice coil with a 25mm ferrofluid coolant
Special Order

Product Description

Features & Specifications

Documents

Warranty

Hertz MP25.3 1.14″ 120W Tweeters

The Tetolon dome and 25 mm voice coil of the MP25.3 vehicle audio tweeters provide a very wide, linear frequency response. The “Center Tuning Duct,” which is located in the centre of the powerful Neodymium magnetic circuit ensures that air is exchanged between the dome and the rear load chamber, fine-tuning the acoustics to perfection. The very low resonance frequency that emerges from the MP25.3 is useful for the woofer crossover point, which raises the sound stage.

The Hertz Mind Set

A good speaker such as the MP25.3, according to Hertz should reveal the emotional strength of the music you enjoy. That’s a difficult standard to meet but they’re up to the task thanks to their commitment to high-quality components and cutting-edge design. Hertz is made up of music fans that are dedicated to making your car’s sound system the best it can be for optimum audio enjoyment.

Features:

  • Soft dome made of Tetolon fibre for a natural yet realistic representation of musical characteristics.
  • Geometry with a “Center Tuning Duct” for a lower resonance frequency and less harmonic distortion.
  • Flux with a high density Magnet made of neodymium, tuned for maximum control during high-energy dynamic transients in the mid-high frequency band.
  • Mobile voice coil with a 25mm ferrofluid coolant.
  • Rear chamber filled with damping material and sized for lower Fs, ensuring an effectively damped high pass frequency roll-off and a low cut-off frequency crossover point.
  • Faceplate with FEM (Finite Element Modeling) optimised geometry for off-axis installations with good linearity.
  • For easy OEM integration, a wide range of installation accessories is available.

MP25.3 Physical Specs:


A: 44 mm (1.73 in.)
B: 41 mm (1.61 in.)
C: 27 mm (1.06 in.)
D: 17 mm (0.67 in.)

MP25.3 Frequency Response Diagram:

For more products from Hertz, click here!

Brand Hertz   Model Hertz MP25.3
Product: Hertz MP25.3 1.14" 120W Tweeters
Speaker Design

Tweeter

Speaker Size

1"

Speaker Sensitivity

91 – 95 db

Impedance

4 Ω

RMS Power

56 to 75 Watts

Features

Soft dome made of Tetolon fibre for a natural yet realistic representation of musical characteristics.
Geometry with a "Center Tuning Duct" for a lower resonance frequency and less harmonic distortion.
Flux with a high density Magnet made of neodymium, tuned for maximum control during high-energy dynamic transients in the mid-high frequency band.
Mobile voice coil with a 25mm ferrofluid coolant.
Rear chamber filled with damping material and sized for lower Fs, ensuring an effectively damped high pass frequency roll-off and a low cut-off frequency crossover point.
Faceplate with FEM (Finite Element Modeling) optimised geometry for off-axis installations with good linearity.
For easy OEM integration, a wide range of installation accessories is available.

Specifications

Speaker Size: 29mm
Design: 1-way
Tweeter Design: 29mm Dome
Impedance (Ohms): 4
Tweeter Composition: Tetolon
Sensitivity (1W at 1 meter): 91
Frequency Response: 1400 – 22.5k Hz
Maximum RMS Wattage: 60
Peak Power Handling (Watts): 120
Top-mount Depth (Inches): 0 11/16
Bottom-mount Depth (Inches): 0 3/4
Cutout Diameter or Length (inches): 1 5/8
Mounting Height (Inches): 0.437

What's In The Box

Two MP 25.3 Dome tweeters (with attached 10" length of speaker wire)
2 Flush mount trim rings
2 Flush mount clamps
2 Angled surface mount housings
2 OEM Mounting brackets
2 Grilles (installed)
Four 3/4" Screws
Four 1/2" Flat head screws
4 Large speed clips
4 Small speed clips
Owner's manual (English/ Spanish/ French/ German/ Italian/ Portuguese/ 21 Others)
Template on box

Estimated Shipping

When you add an item to your cart the Estimated Shipping* cost will be shown.  This estimated shipping* cost is accurate to most major city locations across Canada.  If the shipping cost is higher than the estimated shipping* then GibbysESM will contact you for approval before we process your order.

To learn more click Shipping Terms & Conditions

Hertz 1 Year Limited Warranty.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Save $40.00

$209.99

$249.99

|

OR

|

Payments as low as

$17.50/mo

PayBright
Special Order

Availability: IN STOCK

FAST & FREE SHIPPING
ON MOST ORDERS*
LOWEST PRICE
GUARANTEE
KNOWLEDGABLE
CUSTOMER SERVICE
30 DAY RETURN
POLICY
preloader
feedback
X
Very Satisfied
Satisfied
Neutral
Dissatisfied
Very Dissatisfied
If you are having an issue with a function of the website; please provide as much information about the issue as you can.
Toll Free: 1-866-696-7189
Local: 289-275-1050