Hertz MPK1650.3 6.5″ Component Speaker System

Brand: Hertz
Model Number: MPK1650.3
UPC:
Model Number: MPK1650.3
UPC:
Free Shipping

Save $150.00

$819.99

$969.99

|

OR

|

Payments as low as

$68.33/mo

PayBright

Availability: IN STOCK

Hertz MPK1650.3 6.5″ Component Speaker System

Tweeter Design: 35mm Dome
Impedance (Ohms): 4
Tweeter Composition: Tetolon

Product Description

Features & Specifications

Documents

Warranty

Hertz MPK1650.3 6.5″ Component Speaker System

Mille PRO’s top-of-the-line two-way system is the MPK1650.3 vehicle speaker system. The system employs the MP 28.3 tweeter, which has the same 28 mm diameter as the Mille Legend ML28.3 and includes all of the Mille Legend ML28.3’s technological features. The Tetolon dome’s design optimises off-axis listening dispersion. The dampening material in the rear acoustic chamber aids in extending responsiveness to lower frequencies, resulting in a resonance frequency of only 900 Hz. The crossover point between the tweeter and the woofer can be decreased in this fashion, which improves the sound picture in the dashboard. The large Neodymium motor manages the music programme with very dramatic transients while minimising nonlinearity. The voice coil is made of CCAW (Copper Clad Aluminium Wire) which ensures a light weight and sturdy moving assembly. These technological features combine to provide a high frequency extension of 28 kHz, which is a world record for a tweeter with a voice coil diameter of 28 mm. The system comes with an attractive and compact angled tweeter support that can be easily installed on the A-pillars as well as the automobile dashboard. The correct tweeter angle enhances the stereo image, which is necessary for enjoyable listening. The electroacoustic specifications of the MPK1650.3 woofer were forged to give it the clear and solid sound of a genuine mid-bass, designed for high dynamic systems. With a spacious 14 mm height, the voice coil provides a nominal 3 impedance and better power handling. These capabilities allow the Hertz HCP and HDP amplifiers, as well as all of the 2 stable electronics to be used to their full potential. The +/-4.5 mm voice coil linear excursion is enabled by the ferrite 95 mm diameter magnet, ensuring maximum control at all times. The V-cone® design enhances offaxis dispersion, the true in-car listening environment, and the Boundary Free Surround moves more air. Unwanted vibrations are dampened by the clever aluminium alloy basket.

The MPK1650.3 crossover achieves the best tone balance between the MP 28.3 tweeter and the MP 165P.3 woofer. It has bi-metallic capacitors with polyester dielectric for optimum acoustic transparency as well as air wound inductors made of pure copper wire with a diameter of up to 1mm to avoid saturation. It also accommodates low parasitic inductance wire-wound resistors. The two-position Hi-Contour control allows you to fine-tune the frequency response of the system to match the different speaker placements. Most importantly, the three-position control for the tweeter emission level with 2 dB steps (+2/0/-2dB) attenuation allows listeners to get their preferred sound.

Hertz State Of Mind

A good speaker according to Hertz should be able to express the emotional strength of the music you enjoy. That’s a big accomplishment, but they’re more than capable of meeting it thanks to their commitment to high-quality components and cutting-edge design. Hertz is made up of music enthusiasts that are dedicated to making your car’s sound system the best it can be for optimum audio enjoyment.

For more products from Hertz, click here!

Brand Hertz   Model Hertz MPK1650.3
Product: Hertz MPK1650.3 6.5" Component Speaker System
Speaker Design

2-Way

Speaker Size

6.5"

Speaker Sensitivity

91 – 95 db

Impedance

4 Ω

RMS Power

101 to 200 Watts

Specifications

Speaker Size: 6 1/2
Design: 2-way
Tweeter Design: 35mm Dome
Impedance (Ohms): 4
Tweeter Composition: Tetolon
Woofer Composition: Pressed Paper/Cotton Fiber
Woofer Surround: Rubber
Sensitivity (1W at 1 meter): 92
Frequency Response: 40 – 28k Hz
Maximum RMS Wattage: 150
Peak Power Handling (Watts): 300
Top-mount Depth (Inches): 2 3/4
Bottom-mount Depth (Inches): 2 15/16
Cutout Diameter or Length (inches): 5 9/16
Mounting Height (Inches): 0.424

What's In The Box

Two ML 1650.3 Woofers
Two ML 280.3 Dome tweeters (with attached 10" length of speaker wire)
Two MLCX 2 TW.3 Crossover networks
2 Tweeter flush mount cups (installed)
2 Tweeter flush mount clamps
2 Tweeter grilles (installed)
2 Woofer grilles
Sixteen 1" Allen head screws (3mm)
16 Speed clips
Two M3 x 12mm Machine screws (2.5mm Allen head)
Two M3 x 8mm Machine screws (2.5mm Allen head/installed in tweeter housing)
3mm Allen head bit
2 Flat washers
Owner's manual (English/ Spanish/ French/ German/ Italian/ Portuguese/ 21 Others)
Template on box

Estimated Shipping

When you add an item to your cart the Estimated Shipping* cost will be shown.  This estimated shipping* cost is accurate to most major city locations across Canada.  If the shipping cost is higher than the estimated shipping* then GibbysESM will contact you for approval before we process your order.

To learn more click Shipping Terms & Conditions

Hertz 1 Year Limited Warranty.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Save $150.00

$819.99

$969.99

|

OR

|

Payments as low as

$68.33/mo

PayBright

Availability: IN STOCK

FAST & FREE SHIPPING
ON MOST ORDERS*
LOWEST PRICE
GUARANTEE
KNOWLEDGABLE
CUSTOMER SERVICE
30 DAY RETURN
POLICY
preloader
feedback
X
Very Satisfied
Satisfied
Neutral
Dissatisfied
Very Dissatisfied
If you are having an issue with a function of the website; please provide as much information about the issue as you can.
Toll Free: 1-866-696-7189
Local: 289-275-1050