JL Audio 10W0V3-4 10-inch Subwoofer Driver -#92165

The 10W0V3-4 is a rugged performer with excellent excursion capability and linearity and an overall performance envelope that puts it right at the top of its price class. It features a beefy 2 in. diameter voice coil and our patented Elevated Frame Cooling design for enhanced power handling and reliability. The 10W0v3 is best used with amplifier power in the 75W – 300W range and is optimized to operate in a compact 0.65 cu. ft. (18.4 l) sealed enclosure, or a 1.125 cu. ft. (31.9 l) ported enclosure. Detailed enclosure recommendations can be found in the “Specifications” tab.

Precision-built bass

The JL Audio name means high-quality sound, and the 10W0v3-4 10″ subwoofer doesn’t come up short when delivering trademark JL performance. You’ll find patented technologies like an optimized motor system that promotes precise, linear cone movement, plus advanced cooling systems throughout the frame for rapid heat dissipation.

Long-lasting performance

This W0v3 Series sub features a tough polypropylene cone that resists flexing, and a durable foam surround that’ll stand up to hard use. The cone’s extra-long excursion capability lets it hit truly deep notes without distorting, while the hefty 2-inch voice coil drives the woofer accurately for top-notch performance under extreme conditions.

The patented elevated frame design delivers air flow directly to the voice coil, cooling it for better power handling. JL Audio designed this sub to work in compact sealed or medium-sized ported enclosures, and they offer an optional grille that’ll protect your JL Audio sub in its box.

Technology: Built-in U.S.A. with Global Components

JL Audio’s Miramar, Florida loudspeaker production facility is one of the most advanced in the world

At a time when most audio products are built overseas, JL Audio’s commitment to in-house loudspeaker production continues to grow. To pull this off in a competitive world market, JL Audio’s production engineering team has created one of the world’s most advanced loudspeaker assembly facilities and established a global network of quality component suppliers who build to our specifications. This, combined JL Audio’s commitment to state-of-the-art assembly technology, allows skilled workforce to efficiently build JL Audio products to extremely high quality standards, right here in the U.S.A.

Since most of JL Audio’s premium loudspeakers incorporate proprietary, patented technologies requiring specific assembly techniques, JL Audio find it is vital that the people who designed them have close access to the people manufacturing them. The following JL Audio products are built in Miramar, Florida factory, with global components.

Features

Dynamic Motor Analysis (DMA): DMA is JL Audio’s proprietary method aimed at improving dynamic motor behavior. As a result of DMA optimization, 10W0v3-4 motors display linear force over a long excursion range, and also maintain a stable fixed magnetic field in the gap over a wide power range. The result is reduced distortion, faithfully reproduced transients, and tight, clean, articulate bass.

Elevated Frame Cooling: The elevated frame design of the 10W0v3-4 delivers cool air through slots directly above the top plate to the voice coil. This not only enhances power handling, but also sound quality by minimizing dynamic parameter shifts and power compression.

Rear Gasket: The woofer has a rear gasket to provide an optimal seal when installing into the enclosure.

Long Excursion: The 10W0v3-4 subwoofer has 11.4mm of linear excursion, giving you louder bass with less distortion.

Enclosure Compatibility

Recommended Sealed Box Volume: JL Audio recommends a 0.65 ft³ sealed box. A diagram is provided in the owner’s manual for a sealed box with external dimensions of 18″ W x 11″ H x 9″ D, assuming 3/4″ thick material. (If you are using 5/8″ thick materials, you should subtract 1/4″ from each dimension.)

Recommended Ported Box Volume: JL Audio recommends a 1.125 ft³ ported box. A diagram is provided in the owner’s manual for a ported box with external dimensions of 23″ W x 12″ H x 13.625″ D, assuming 3/4″ thick material. (If you are using 5/8″ thick materials, you should subtract 1/4″ from each dimension.) A slot port measuring 10.5″ tall x 1.25″ wide x 32″ long is recommended, resulting in a tuning frequency of 30 Hz and a -3 dB point of 29.6 Hz.

10W0V3-4 Dimensions: