JL Audio 10W3v3-4 10-inch 4-ohm Subwoofer – #92151

$399.99

JL Audio 10W3v3-4 #92151 10-inch 4-ohm Subwoofer

  • Continuous Power Handling (RMS) 500 W
  • Free Air Resonance (Fs) 31.49 Hz
  • Overall Diameter  10.5 in / 267 mm
  • Frequency Response 25 – 250 Hz

In stock

Free Shipping
SKU: 10W3v3-4 #92151 Item #: 92151 Category:

Frequently Bought Together

JL Audio 10W3v3-4++JL Audio TR690-TXi+JL Audio TR400-CXi
Price for all:   $747.80

Product Description

JL Audio 10W3v3-4 #92151 10-inch 4-ohm Subwoofer

The JL Audio 10W3v3-4 subwoofer boasts a 10″ mineral-filled polypropylene cone with a distinctive metallic JL Audio medallion. A patented design eases the stress felt by the rubber surround during cone movement, for increased reliability and consistent bass output. The removable, customizable trim ring accepts optional JL Audio grilles, and can be painted to enhance your installation.

Dynamic Motor Analysis

DMA is JL Audio 10W3v3-4’s proprietary method aimed at improving dynamic motor behavior. As a result of DMA optimization, W3v3 motors remain linear in motor force over a very long range of excursion, and also maintain a highly stable fixed magnetic field in the gap over a wide power range. The result is vastly reduced distortion, faithfully reproduced transients, and tight, clean, articulate bass.

Floating Cone Attachment Method

JL Audio 10W3v3-4’s patented FCAM technology is an innovative method of bonding the surround/cone assembly to the voice coil/spider assembly. This assembly technique ensures proper surround geometry in the assembled speaker for better excursion control and dynamic voice coil alignment.

Vented Reinforcement Collar

The Vented Reinforcement Collar is a composite structure that addresses two issues related to reliability. By reinforcing the critical junction between the cone, voice coil and spider, the VRC greatly reduces failures due to glue breakdown or material weaknesses. It does this by greatly increasing adhesive contact area and providing stress relief to the spider material at excursion extremes. the VRC also feature slots that facilitate air flow directly onto the voice coil windings to reduce thermal compression effects and enhances reliability.

Spider/Lead Wire Assembly

The JL Audio 10W3v3-4 features a unique spider, coil and terminal subassembly which is assembled prior to installation in the speaker frame for optimum alignment and glue-joint integrity. The spider is insert-molded into a composite carrier tray which also incorporates the terminal assembly and lead wire strain relief features for enhanced reliability and optimal alignment of parts. The flying lead wires are carefully controlled and strain-relieved without resorting to woven-in lead wires, which can degrade spider performance.

Elevated Frame Cooling

The elevated frame design of the JL Audio 10W3v3-4 delivers high-velocity air flow through slots directly above the top plate to the voice coil of the speaker. This not only enhances power handling, but also sound quality by minimizing dynamic parameter shifts and power compression.

Surround Stress Relief

By creating a radiused feature on the edge of the cone, stress is relieved from the surround material at maximum forward excursion, resulting in longer life and more consistent surround behavior.

Customizable Trim Ring

The woofer comes with a removable ring made of black ABS plastic which can be painted to match the installation theme and create a personalized look. You can purchase optional grille mesh inserts which are specifically designed to fit into the inner diameter of the trim ring.

Additional Information

Weight5.56 kg
Parameters

Free Air Resonance – 31.49 Hz
Electrical “Q” – 0.523
Mechanical “Q” – 7.017
Total Speaker “Q” – 0.485
Equivalent Compliance – 1.138 cu ft / 32.23 liters
One-Way Linear Excursion – 0.550 in / 14.0 mm
Reference Efficiency – 0.19%
Efficiency – 84.87 dB SPL
Effective Piston Area – 53.475 sq in / 0.0345 sq m
DC Resistance – 3.567 Ω

General Specifications

Continuous Power Handling – 500 W
Recommended Amplifier Power – 150 – 500 W
Nominal Impedance – 4 Ω

Physical Specifications

Nominal Diameter – 10.0 in / 250 mm
Overall Diameter – 10.5 in / 267 mm
Mounting Hole Diameter – 9.0625 in / 230 mm
Bolt Hole Circle Diameter – 9.7 in / 246.5 mm
Motor Outer Diameter – 5.25 in / 133 mm
Mounting Depth – 5.93 in / 151 mm
Driver Displacement – 0.049 cu ft / 1.39 L
Net Weight – 12.25 lb / 5.56 kg

RMS Power

401 to 800 Watts

Car Subwoofer Size

10″

Estimated Shipping

When you add an item to your cart the Estimated Shipping* cost will be shown.  This estimated shipping* cost is accurate to most major city locations across Canada.  If the shipping cost is higher than the estimated shipping* then GibbysESM will contact you for approval before we process your order.

To learn more click Shipping Terms & Conditions

JL Audio Canada Limited Warranty 1 Year Parts and Labour.

Reviews

There are no reviews yet.

Be the first to review “JL Audio 10W3v3-4 10-inch 4-ohm Subwoofer – #92151”