JL Audio 12TW3-D8 12″ 8 Ohm thin-line 8 Ohm Subwoofer driver – #92194

$549.95

Or as low as $91.66 per month over 6 months. Apply Now.

Condition: New

JL Audio 12TW3-D8 12-inch thin-line Subwoofer driver #92194

• Concentric tube architecture
• Patented “floating cone attach method” technology
• Cast alloy frame
• Injection molded, mica-filled polypropylene cone
• Rubber surround
• Aluminum-alloy dust cap and rear cap with JL Audio logo

In stock

Free Shipping
SKU: 12TW3-D8 Item #: 92194 Category:

Product Description

JL Audio 12TW3-D8 12-inch thin-line Subwoofer driver #92194

The JL Audio 12TW3-D8  12-inch Subwoofer Driver (400 W, dual 8 Ω voice coils)build on the core technology of our TW5 thin-line subwoofers, the new TW3’s deliver a powerful combination of shallow mounting depth and excursion capability. In fact, they are capable of greater excursion than the W3v3’s.

To allow this remarkable feat to be achieved, JL Audio’s patented thin-line woofer technology compresses the architecture of the TW3’s using a “concentric tube” structure built into the injection-molded cone body. This structure supports the voice coil and a full annular spider, while permitting the placement of the large motor structure further forward in the speaker than with conventional designs.

TW3’s are optimized for small enclosures and offer our tab-ear mounting design to maximize cone area within their mounting footprints. We know you’re going to love working with these amazing subwoofer drivers.

Deep, powerful and accurate JL Audio bass is now possible in more applications than ever. Very shallow mounting depth (3.25 / 3.50 Inches). No pole vent: permits mounting close to rear wall of enclosure. Very small sealed enclosure volume requirements. Very long linear excursion capability (0.60 In / 15.2 mm, one-way). DMA-optimized motor designs.Patented “concentric tube” architecture. Patented “floating cone attach method” technology. Cast alloy frame. Injection molded, mica-filled polypropylene cone. Rubber surround.Aluminum-alloy dust cap and rear cap with JL Audio logo.Precision-built in USA with Global Components at JL Audio’s Miramar, Florida factory

Additional Information

Weight 6.8 kg
Specifications

– Continuous Power Handling (RMS) 400 W
– Recommended Amplifier Power (RMS) 200 – 400 W
– Nominal Impedance (Znom) Dual 8 Ω

– Physical Specs
– Nominal Diameter 12 in / 300 mm
– Overall Diameter (A) A1: 13.2 in / 335 mm
– A2: 12.5 in / 318 mm
– Mounting Hole Diameter (B) 11.625 in / 295 mm
– Bolt Hole Circle Diameter (C) 12.5 in / 318 mm
– Motor Outer Diameter (D) 6.125 in / 156 mm
– Mounting Depth (E) 3.5 in / 89 mm
– Driver Displacement 0.029 cu ft / 0.82 L
– Net Weight 14.9 lb / 6.8 kg

– Sealed Enclosure Spec
– Wall Thickness 0.75 in / 19 mm
– Front Baffle Thickness 0.75 in / 19 mm
– Volume (net int.) 0.80 cu ft / 22.7 L
– External Width (W) 21.25 in / 540 mm
– External Height (H) 16 in / 406 mm
– External Depth (D) 6.5 in / 165 mm
– F3 37.99 Hz
– Fc 46.97 Hz
– Qtc 0.9426

– Ported Enclosure Specs
– Wall Thickness 0.75 in / 19 mm
– Front Baffle Thickness 0.75 in / 19 mm
– Volume (net int.) 0.95 cu ft / 26.9 L
– External Width (W) 30 in / 762 mm
– External Height (H) 16.625 in / 422 mm
– External Depth (D) 6.50 in / 165 mm
– Internal Slot Port Width (SW) 5 in / 127 mm
– Internal Slot Port Height (SH) 2.50 in / 64 mm
– Internal Slot Port Length (SL) 31.25 in / 794 mm
– Port Extension Length (EL) 26 in / 660 mm
– Tuning Frequency (Fb) 32.14 Hz
– F3 32.52 Hz

Car Subwoofer Size

12″

RMS Power

201 to 400 Watts

Estimated Shipping

When you add an item to your cart the Estimated Shipping* cost will be shown.  This estimated shipping* cost is accurate to most major city locations across Canada.  If the shipping cost is higher than the estimated shipping* then GibbysESM will contact you for approval before we process your order.

To learn more click Shipping Terms & Conditions

JL Audio 1 Year Limited Warranty

Reviews

There are no reviews yet.

Be the first to review “JL Audio 12TW3-D8 12″ 8 Ohm thin-line 8 Ohm Subwoofer driver – #92194”