JL Audio ACS110LG-TW1 PowerWedge+ 10″ powered Subwoofer – #93334


Or as low as $63.33 per month over 12 months. Apply Now.

Condition: New

JL Audio ACS110LG-TW1 # 93334 PowerWedge+ 10″ powered subwoofer

  • 10″ TW1 subwoofer in sealed enclosure
  • built-in Class D amp delivers 400 watts RMS at 0.25 ohms
  • woofer impedance: 0.25 ohms
  • low-pass filter (50-200 Hz, 12 dB slope)
  • recommended power/ground wire gauge: 8 AWG

In stock

Free Shipping
SKU: ACS110LG-TW1 Item #: 93334 Category:

Frequently Bought Together

JL Audio ACS110LG-TW1+JL Audio RBC-1 Car Audio Bass Remote Control 98015
Price for both:   $809.90

Product Description

JL Audio ACS110LG-TW1 # 93334 PowerWedge+ 10″ powered subwoofer

In JL Audio ACS110LG-TW1 system, the power is built right into the subwoofer system. Housing a proprietary Class D amplifier, this subwoofer system employs our exclusive DCD™ amplifier technology to extract maximum output from its specially engineered, ultra low-impedance TW1 driver. By combining direct power conversion with an ultra-high current output section, DCD™ amplifiers are free of conventional switching power supplies, enabling them to generate remarkable power with unprecedented efficiency.

Harnessing the performance and insanely small box requirements of the TW1 subwoofer driver, this subwoofer system is designed to deliver amazing sub-bass from an enclosure that is only 5 inches (127 mm) deep. Its low-profile enclosure design has been carefully engineered to the optimum sealed enclosure alignment for the 10TW1 driver and has been fine-tuned through extensive real-world listening.

Integration to OEM and aftermarket head units is a snap thanks to a variety of input options and automatic turn-on capability (via signal sensing or DC offset sensing). Also included is a variable frequency low-pass filter (50-200 Hz), along with output polarity control switch. Adding an optional RBC-1 remote level control (sold separately) lets you control subwoofer levels directly from the driver’s seat. A quick-disconnect power connector makes it easy to remove the subwoofer when you need the extra space.

Note: DCD amplified systems use very specific components. Never use a DCD amplifier or its companion subwoofer(s) with incompatible, non-DCD products. Doing so will void the warranty and may cause severe damage.

Finish: Black, high-grade automotive carpet with silver “JL AUDIO Built In USA” embroidery on front baffle. A steel mesh grille is included to protect the subwoofer driver.

DCD Amplifier Technology

JL Audio’s Direct Conversion Class-D Technology (DCD) is purpose-engineered to be the most efficient subwoofer amplifier on the market while delivering extraordinary output with minimal current draw and heat. DCD amplifiers do away with the losses associated with a traditional “switching power supply”, allowing the amplifier to achieve total power efficiencies in the 91 – 94% range. What this means to you is very little heat, ultra-compact size and enough power to fill in the low end of any modest car audio setup. Along with the specifically engineered, low-impedance TW1 driver the system extracts astonishing overall output with unprecedented efficiency.

Additional Information

Weight 12.70 kg

General Features:
– Single 10″ Sealed Subwoofer Enclosure with Built-In Amplifier
– Power Output:
– RMS: 400 Watts Total
– Preloaded with single 10″ TW1 Series Subwoofer Driver – 10TW1-0.25
– Built-in DCD Class D amplifier
– Sealed enclosure with carpet finish
– Authorized Internet Dealer
– 2 Year Manufacturer’s Warranty

Subwoofer Features:
– Injection molded, mica-filled polypropylene cone
– Rubber surround
– Cast alloy frame
– Long linear excursion capability (0.40 in / 10 mm, one-way)
– DMA-optimized motor design
– Patented “concentric tube” architecture
– Patented “floating cone attach method” technology
– Steel mesh grille included

Amplifier Features:
– Class D amplifier
– Input Voltage Range @ RCA Inputs: 70 mV – 1.40 V RMS
– Input Voltage Range @ High-Level Inputs: 280 mV – 5.4 V RMS
– 12 dB per octave filter slope
– Low-pass filter: 50 – 200 Hz
– Selectable output polarity (i.e. Phase): 0 / 180°
– Selectable turn-on modes: Sig / DC / REM
– Automatic turn-on (via signal sensing or DC offset sensing)
– High level speaker input, w/ molex connection harness
– Optional bass remote available, sold separately: JL Audio RBC-1
– Fuse Rating: 30A x 1
– 8 gauge OFC power and ground wiring is recommended for installation.

Enclosure Features:
– V-Groove MDF Construction
– Automotive-grade vehicle carpet
– CNC-Cut High-Grade MDF
– Silver “JL AUDIO Built In USA” embroidery on front baffle
– Steel mesh grille mounted with driver
– Enclosure Dimensions: 5.00″ D x 18.50″ W x 11.125″ H

RMS Power

201 to 400 Watts

Speaker Size


Estimated Shipping

When you add an item to your cart the Estimated Shipping* cost will be shown.  This estimated shipping* cost is accurate to most major city locations across Canada.  If the shipping cost is higher than the estimated shipping* then GibbysESM will contact you for approval before we process your order.

To learn more click Shipping Terms & Conditions

JL Audio 2 Year Limited Warranty


There are no reviews yet.

Be the first to review “JL Audio ACS110LG-TW1 PowerWedge+ 10″ powered Subwoofer – #93334”