JL Audio C3-570 Bundle #2 – 99021 | 99021 | 93135 | 98606 | 90354 | 90429

Brand: JL Audio
Model Number: 166093
Model Number: 166093

Save $9.00






Payments as low as


Special Order - ETA 60 Days

Product Description

Features & Specifications




JL Audio C3-570 Bundle #2

This Bundle Includes:
(2) JL Audio C3-570 5×7″ Convertible Component/Coaxial Speakers – Pair – #99021
(1) JL Audio HO110RG-W3v3 10″ 500 Watt 2 Ohm Subwoofer – #93135
(1) JL Audio XD700/5v2 5 Ch, 700 Watt Amplifier – #98606
(1) JL Audio XD-PCS4-2B, 4 AWG 12 V Power Connection Kit, Two-Amplifer – #90354
(1) JL Audio XD-CLRAIC4-18 18 Ft (5.49 m) Core Series 4 Channel Audio Interconnect Cable – #90429

JL Audio C3-570 #99021 – 5×7″ Convertible Component Speaker System – Pair

With the JL Audio C3-570 Convertible Component Systems, the same product can be deployed in either configuration, delivering outstanding audio power and quality in each application because there are times when an installation calls for a separate woofer and tweeter and other times when a coaxial is the better approach.

Many people mistakenly believe that an oval speaker cannot perform as well as a round one, leading to many instances of 5.25-inch speakers being installed into 5 x 7-inch openings. JL Audio has put in the engineering time and effort to create fantastic-sounding speakers that drop into oval openings and deliver equivalent performance to our 6.5-inch (165 mm) round speaker systems… guaranteed. So, don’t make the mistake of losing cone area and efficiency by stepping down to a smaller round speaker… these ovals are as impressive as our round format systems.

The C3-570 system features 5 x 7 / 6 x 8-inch (125 x 180 mm) component woofers with oversized 1.2-inch (30.5 mm) voice coils, mineral-filled polypropylene cones and injection-molded polymer baskets. The woofer design benefits from JL Audio’s vast woofer design experience and advanced modeling systems.

The C3 tweeters are built with 1-inch silk dome diaphragms that deliver powerful, extended response, on and off axis. Flush-mounting and surface-mounting fixtures are included to fit a wide variety of installation needs. They can also be mounted onto the woofers in a coaxial format using the included fixtures.

C3 crossover networks are compact and built with premium component parts, including Mylar® capacitors and segmented air-core inductors. Four levels of tweeter attenuation are provided, as well as three levels of mid-range presence adjustment, for twelve possible voicing combinations!

Woofer grilles are not available for this product.

Sonic character: Clean and Powerful

JL Audio HO110RG-W3v3 #93135 – High Output Subwoofer System

JL Audio’s patented High Output Enclosures are designed to deliver the ultimate high-performance bass experience with a rare combination of superb sound quality and awesome output, This JL Audio HO110RG-W3v3 performs well and will meet your desired needs.

JL Audio’s patented, chamber-coupled port design (U.S. patent #6,625,292) wraps around the inner enclosure boundary and terminates on one side of the woofer, coupling the port output to the woofer’s direct output. This also provides the necessary surface area and port length to maximize the performance of the W3v3 driver.

This JL Audio HO110RG-W3v3 enclosure design has been carefully engineered to the optimum ported alignment for the 10W3v3, and has been fine-tuned through extensive real-world listening. This efficient system will produce superb output with as little as 150W of amplifier power, but performs best with 300 – 500 W of power.

This JL Audio HO110RG-W3v3 system is shipped wired, loaded and ready to connect via a five-way binding post terminal. Three solid aluminum bars provide stylish and rugged woofer protection.

The angled-back design saves precious cargo space by allowing the enclosure to fit tightly against the back of a vehicle’s rear seat.

Finish: Dark gray, high-grade automotive carpet, with black carpet on woofer baffle. “JL AUDIO” is embroidered in silver on the top surface of the enclosure.

V-Groove MDF Construction

This advanced cabinet-building technique uses CNC-machining to create precise panel joints that make enclosure assembly more efficient and exact.
We begin with quality medium-density fiberboard, which is then machined on our CNC-controlled KOMO woodworking stations. These powerful machines are able to cut a wide range of features onto a sheet of MDF, with minimal waste and absolute precision. The KOMO machines cut out the woofer holes, terminal holes, cut dado grooves, create countersinks and most importantly, cut the angles at the edges of the panels that form the enclosure’s main shell so that these panels fit together precisely, with no gaps or leaks.

Once the panels are cut, assembly technicians line them up in the correct order and glue their outer faces onto a long piece of carpet, creating a “wrap”: a long series of panels, hinged temporarily by the carpet. In the next assembly step, our wood assembly teams fill the V-grooves between the panels and any dado grooves that receive dividers or secondary wraps with wood-glue. Once the glue is applied, the enclosure shells folds together along the V-grooves, capturing dividers in the dado grooves and secondary wraps, and evenly spreading the glue throughout the joints. One line of mechanical fasteners is applied to hold the structure together while the wood glue dries.

The V-groove technique greatly improves assembly efficiency, and also results in a far stronger and better sealed enclosure than the typical butt-joint construction found on imported enclosures. The quality of the MDF used in JL Audio systems is also vastly better than the typical “China-Grade MDF” used in the imported products.

High-Output (H.O.) Enclosure Design (U.S. Patent #6,625,292)




Insanely powerful H.O. (High Output) systems deliver very high SPL while retaining excellent sound quality.
HO models use our patented, chamber-coupled port design. The slot-port wraps around the inner enclosure and terminates on the mounting plane of the woofer. This provides the necessary surface area and port length to maximize the performance of the driver, while also coupling the port output and direct woofer output to radiate together into the listening space.

Dynamic Motor Analysis – DMA Optimized Motor

JL Audio’s proprietary Dynamic Motor Analysis system is a powerful suite of FEA-based modeling systems, first developed by JL Audio in 1997 and refined over the years to scientifically address the issue of speaker motor linearity. This leads to vastly reduced distortion and faithfully reproduced transients… or put simply: tight, clean, articulate bass.

Since 1997, JL Audio has been at the forefront of Finite Element Analysis-based modeling of loudspeaker motors and suspensions. This research is aimed at decoding what we refer to as the “Loudspeaker Genome”… a project aimed at understanding the true behavior of loudspeakers under power and in motion. A major component of this integrated system is DMA (Dynamic Motor Analysis). Starting with the 15W3v3 and the W7 Subwoofers in the late 1990’s and early 2000’s, DMA has played an important role in the design of all JL Audio woofers sold today, including our component woofers.

DMA is a Finite Element Analysis (FEA)-based system, meaning that it takes a large, complex problem, breaks it down into small solution elements for analysis and then assembles the data to form an accurate, “big-picture” solution. DMA’s breakthrough is that it actually considers the effects of power through the coil as well as coil/cone position within the framework of a time-domain analysis. This gives us a highly accurate model of a speaker’s actual behavior under real power, something that the traditional Thiele-Small models or other low power measurements cannot do. Because DMA does not rely on a steady-state model, it is able to consider shifts in the circuit elements being analyzed. These modeling routines are intense, requiring hours to run for a whole speaker.

DMA is able to analyze the real effects of fluctuating power and excursion upon the magnetic circuit of the motor, specifically the dynamic variations of the “fixed” magnetic field. This delivers intensely valuable information compared to traditional modeling, which assumes that the “fixed” field produced in the air gap by the magnet and the motor plates is unchanging. DMA not only shows that this “fixed” field changes in reaction to the magnetic field created by current flowing through the voice coil, but it helps our engineers arrive at motor solutions that minimize this instability. Analyzing this behavior is critical to understanding the distortion mechanisms of a speaker motor and sheds light on the aspects of motor design that determine truly linear behavior:

Linear motor force over the speaker’s operational excursion range

Consistent motor force with both positive and negative current through the coil

Consistent motor force at varying applied power levels
Our ability to fully analyze these aspects of motor behavior allows our transducer engineers to make critical adjustments to motor designs that result in extremely linear, highly stable dynamic loudspeaker motor systems.

The payoff is reduced distortion, improved transient performance and stellar sound quality.

Elevated Frame Cooling (U.S. Patent #6,219,431 & #6,229,902)

JL Audio’s patented Elevated Frame Cooling design in the JL Audio HO110RG-W3v3 delivers cool air through slots directly above the top-plate to the voice coil of the speaker. This not only enhances power handling, but also sound quality by minimizing dynamic parameter shifts and power compression.

Many speakers employ venting techniques to enhance voice coil cooling. This is typically accomplished by having big holes in the sides of the frame just below the spider attachment shelf. While it provides a modest cooling benefit, this low-velocity air-flow does not blow directly or strongly on the voice coil.

Our patented design improves upon this cooling technique in a number of ways. By elevating the frame above the top-plate of the motor (via stand-offs integrated into the bottom of the frame) a narrow, high-velocity air-path is created between the bottom surface of the frame and the top surface of the top-plate. This air path leads directly to the voice coil and then turns upward into the spider air cavity. By utilizing the pumping action of the spider through this focused air path, a large volume of cool air hits the coil windings directly.

Another important benefit of the JL Audio HO110RG-W3v3 is that the upper surface of the top-plate (one of the speaker’s hottest parts) is directly exposed to cooling air flow, whereas on a conventional design it is isolated from the air flow by the lower flange of the frame. The elevated frame technology greatly increases thermal power handling, reduces compression effects and does so without any additional parts.

Floating Cone Attach Method – FCAM™ (U.S. Patent #6,501,844)

This assembly technique, conceived by JL Audio, ensures proper surround geometry in the assembled speaker for better excursion control and dynamic voice coil alignment.
JL Audio’s patented FCAM™ technology is an innovative method of bonding the surround/cone assembly to the voice coil former/spider assembly. This feature helps ensure concentricity of the surround, spider and voice coil without torquing the suspension to achieve it. This allows for the inevitable, slight variations in production part dimensions without having them negatively impact the integrity of the suspension and coil-centering at high excursions.

Vented Reinforcement Collar (U.S. Patent #5,734,734)

JL Audio’s patented Vented Reinforcement Collar (VRC®) improves the rigidity and stability of the cone/spider/voice coil junction and directs airflow over the voice coil windings for improved thermal performance of this JL Audio HO110RG-W3v3.

The Vented Reinforcement Collar (VRC®) is a composite structure that addresses two issues related to reliability.

By reinforcing the critical junction betweeen the cone, voice coil and spider, the VRC greatly reduces failures due to glue breakdown or material weakness. It does this by greatly increasing adhesive contact area and providing stress relief to the spider material at excursion extremes.


The VRC™ also features slots that facilitate air flow directly onto the voice coil windings. This reduces thermal compression effects and enhances reliability.

Current versions of the VRC™ also incorporate lead-wire strain relief structures to improve mechanical reliability.

Insert Molded Suspension / Coil / Terminal Sub-Assembly (U.S. Patent #7,379,558)

The JL Audio HO110RG-W3v3’s Spiders, voice coils, terminals and lead wires are preassembled, using a patent-pending process, onto a composite carrier for improved precision and reliability.

A conventional speaker is assembled in layers. In other words, multiple parts are assembled and glued sequentially into the basket, leading to stacking of tolerances and making it difficult to achieve optimal assembly precision.

JL Audio’s patent-pending insert-molded spider carrier permanently bonds the spider to a mechanically robust carrier that also incorporates the terminal assembly and lead wire strain relief features for enhanced relability and optimal alignment of parts. This subassembly is assembled outside the speaker basket, for optimum alignment and glue-joint integrity. The benefit is a more precisely built, more mechanically sound loudspeaker.

Customizable Trim Ring (U.S. Patent #D480,709)

This removable ring can be painted to match the installation theme and directly receives JL Audio grille mesh inserts (sold separately).

This ABS trim ring is molded in black, but that doesn’t mean it has to stay that way. By custom painting it, you can match your installation theme and create a personalized look.

Specifically-designed grille mesh inserts are available separately and fit into the inner diameter of the trim ring on the JL Audio HO110RG-W3v3.

Helpful Tip: Installing the grille mesh inserts is much easier before mounting the woofer into the enclosure.

Precision Built in U.S.A.

JL Audio’s Miramar, Florida loudspeaker production facility is one of the most advanced in the world.

At a time when most audio products are built overseas, JL Audio’s commitment to in-house loudspeaker production continues to grow. All W7’s, W6’s, TW5’s, TW3’s, W3v3’s and some of our ZR products. We also build our Marine Speaker Systems, Home Subwoofers, Stealthbox® products and the vast majority of our enclosed subwoofer systems in Florida.

To pull this off in a competitive world market, our production engineering team has created one of the world’s most advanced loudspeaker assembly facilities. This commitment to state-of-the-art technology allows our highly skilled workforce to efficiently build JL Audio products to extremely high quality standards.

While it is also feasible to build good quality products overseas (and we do build some of our products in Europe and Asia), it can be challenging when the product’s technology is innovative or complex. Since most of our premium loudspeakers incorporate proprietary, patented technologies requiring specific assembly techniques, we prefer that the people who design them have close access to the people manufacturing them.

JL Audio XD700/5v2 5 Channel Car Amplifier 75w x 4 + 300w x 1 – #98606

The JL Audio XD700/5v2 5 Channel Car Amplifier is ideal for a complete audiophile-grade, subwoofer + four satellite system, and it fits comfortably in just about any vehicle. With this incredible little amplifier, you can drive two pairs of quality component speaker systems with plenty of clean power (75 W x 4 @ 4 ?), while also delivering a stout 300 W of power to a subwoofer system. The breakthrough that makes this much power possible in such a small chassis is our NexD™ switching design.

The XD700/5v2 includes a 12 dB / octave high-pass filter for one main channel pair, a 12 dB octave high-pass or bandpass filter for the other main channel pair, plus a variable slope low-pass filter for its subwoofer channel. All three filters offer continuously variable cutoff frequency selection from 50-500 Hz. This amplifier’s filters can also be configured as a true 3-way crossover, with a low-pass filter for the subwoofer channel, a bandpass filter on Ch. 3 & 4, and a high-pass filter on Ch. 1 & 2. An “x10” multiplier switch on the Ch. 1 & 2 high-pass filter allows its cutoff frequency to be adjusted from 50-500 Hz or 500-5000 Hz.

The JL Audio XD700/5v2 also features the v2 Spec feature set, which consists of automatic turn-on capability (via signal sensing or DC-offset sensing), and a dual-range differential-balanced input section able to handle a wide range of input voltage levels. With the addition of an HD-RLC remote level control (sold separately), the amplifier’s level can be directly controlled from the driver’s seat.

This amplifier features a black powder-coat finish and a gasketed, brushed aluminum cover for the controls.

This Amp Will Power Your Whole System

JL Audio’s XD700/5v2 amp packs a wallop far beyond what you’d expect from something so small. Proprietary NexD™ amplifier technology allows this compact amp to play your music with true fidelity and impressive impact, without straining your car’s electrical system. A cast alloy heatsink and an advanced cooling system keep this amp at optimal temperature, eliminating thermal shut-downs so your music keeps going strong without interruption.

Versatile Amp

This 5-channel amp can deliver 75 watts RMS to each of your front and rear speakers, while powering a sub with up to 300 watts. You can also switch to 3-channel mode, and power a pair of high-performance speakers with 200 watts each, while still driving a sub with 300 watts.

And for those who run 3-way, or active speaker systems, the XD700/5v2’s front channels can be high-passed to run tweeters, the rear channels band-passed for midrange or mid-bass speakers, and the sub channel low-passed for bass.

Works With Almost Any Vehicle’s System

“Differential-balanced” inputs keep the signals clear of outside noise, and allow you to connect this amp to just about any in-dash stereo, even a factory radio. The speaker-level inputs feature two auto turn-on modes so you can readily incorporate this amp into a factory system — no need for RCA connections or a remote turn-on lead. An optional wired remote lets you tweak the level of the subwoofer or the whole system from your front seat.

JL Audio XD-PCS4-2B, 4 AWG 12 V Power Connection Kit, Two-Amplifer #90354

Amplifier installation kits can save you time & money when installing an amplifier in your vehicle like installing the JL Audio XD-PCS4-2B. Instead of purchasing everything you need separately like power/ground cables, remote turn-on cable, fuse blocks, fuses, and more, you can get an amp kit that already has the cables & accessories in one package. Amplifier wiring kits come in various gauge configurations depending on the wattage of your sound system and include all the necessary components you need to successfully install an amplifier.

This JL Audio 4 AWG Amplifier Power Connection Kit includes all the necessary hardware and wire to power one amplifier and is designed specifically for car audio systems up to 700 watts. The included premium power/ground cable is made from 100% oxygen-free copper and is true-to-gauge for ultimate power transfer. This XD-PCS4-2B power amp kit includes 30-feet of 4 AWG red power cable, 10-feet of 4 AWG black ground cable, 16 AWG blue remote turn-on wire, ANL Fuse holder, 100 Amp ANL fuse and more.

JL Audio XD-CLRAIC4-18 #90429 18 Ft (5.49 m) Core Series 4 Channel Audio Interconnect Cable

The JL Audio XD-CLRAIC4-18 is 4-channel Twisted-Pair Audio Interconnect Cable. Twisted construction for increased quality.Pure oxygen free copper conductors with Polyethylene Dielectrics molded connector bodies for extended durability.

Brand JL Audio   Model JL Audio 166093
Product: JL Audio C3-570 Bundle #2 - 99021 | 99021 | 93135 | 98606 | 90354 | 90429
JL Audio C3-570

– Continuous Power Handling: 75 Watts
– Rec. Power Range (per channel): 25 – 150 Watts
– System
– Efficiency: 90.0 dB @ 1W/1m
– 96.0 dB @ 1W/0.5m

– System
– Nominal Impedance: 4 ohms
– System Frequency Response: 48 Hz – 25 KHz ± 3 dB
– Woofer Frame Outer
– Diameter* (A) 5.52 x 7.68 in. / 140.2 x 195.1mm
– Woofer Grille Tray
– Outer Diameter** (B) N/A
– Woofer Magnet Outer
– Diameter (C) 4.08 in. / 103.6 mm
– Frontal Coaxial
– Tweeter Protrusion*** (D) 0.78 in. / 19.8 mm
– Woofer Frontal
– Grille Protrusion**** (E) N/A
– Woofer Mounting Hole
– Diameter (F) N/A
– Woofer Mounting
– Depth (G) 2.52 in. / 64.0 mm
– Flush Mount Fixture
– Diameter (A) 2.12 in. / 53.8 mm
– Flush Mount Trim-Ring Diameter
– Flush Mount Mounting
– Hole Diameter (C) 1.875 in. / 47.6 mm
– Flush Mount Mounting
– Depth (D) 0.71 in. / 18.0 mm
– Surface Mount
– Fixture Diameter (E) 1.93 in. / 49.0 mm
– Surface Mount
– Protrusion (F) 0.95 in. / 24.1 mm
– Crossover

– Height (A) 4.72 in. / 119.9 mm
– Width (B) 3.36 in. / 85.3 mm
– Depth (C) 1.44 in. / 36.6 mm

JL Audio HO110RG-W3v3

– Ported enclosure with one 10″ W3v3 subwoofer
– 5/8″ medium density fiberboard construction covered with gray carpet and black insert
– Solid aluminum grille bars
– 2-ohm total impedance
– Power handling: 150-500 watts RMS
– Frequency response: 25-250 Hz
– Sensitivity: 85 dB
– 29-1/2″W x 13-1/4″H x 12″D1 x 7-3/8″D2

– Subwoofer Series W3v3 (JL Audio)
– Subwoofer Size 10″
– Voice Coil(s) Single
– Impedance (Per Voice Coil) 2 ohms
– RMS Power Handling 500 watts
– Total RMS Power Handling 500 watts
– Peak Power Handling 1000 watts
– Total Peak Power Handling 1000 watts
– Woofer Composition Mineral-Filled Polypropylene
– Woofer Surround Nitrile Butadiene Rubber (NBR)
– Sensitivity 84.87 dB
– Frequency Response 25 – 250 Hz
– Xmax (millimeters) 14 mm
– Subwoofer Design Round / Circle

– Box Type Vented / Ported
– Number of Subs/Speakers 1
– Box Style/Shape Hatchback Style, Angled Back
– Height 13-1/2″
– Width 29-1/2″
– Depth 12″
– Second Depth 7-1/2″
– Wood Thickness 3/4″
– Number of Terminals 1
– Terminal Type Binding posts
– Box Exterior Color Gray
– Box Finish Carpet

Whats In The Box
– 10″ woofer in a hatcback enclosure
– Warranty Information sheet

JL Audio XD700/5v2

– RMS Power Output (Watts x Channels) – 75 x 4
180 x 1

– Peak Power Output (Watts x Channels) – N/A
– Power at 2 Ohms (Watts x Channels) – 100 x 4
– Bridged Power (Watts x Channels) – 200 x 2
– Minimum Impedance Bridged – 4
– Minimum Impedance Unbridged – 2
– Best Frequency Response – 12-22000 Hz
– THD at Rated RMS Power – 1%
– Signal to Noise Ratio – 84 dB
– Input Voltage – 14.4v

JL Audio XD-PCS4-2B

– Amp Kit Type Power
– Number of Amplifiers Supported 2
– Power/Ground Wire Size 4 gauge
– Power Wire Length 30 feet
– Power Wire Color Blue
– Ground Wire Length 10 feet
– Ground Wire Color Clear
– Speaker Wire Included No
– Remote Wire Length 20 feet
– Interconnect (RCA) Signal Cables Included No
– Fuse Holder ANL
– Fuse Size 100A
– Complies to AWG Standards Yes
– Wire Material OFC (Oxygen-Free Copper)

JL Audio XD-CLRAIC4-18

– 18 Ft (5.49 m) Core Series 4 Channel Audio Interconnect Cable
– Twisted construction for increased quality
– Pure oxygen free copper conductors with Polyethylene Dielectrics
– Molded connector bodies for extended durability
– Length: 18 Ft (5.49 M)


, ,

Back Order Allowed

Estimated Shipping

When you add an item to your cart the Estimated Shipping* cost will be shown.  This estimated shipping* cost is accurate to most major city locations across Canada.  If the shipping cost is higher than the estimated shipping* then GibbysESM will contact you for approval before we process your order.

To learn more click Shipping Terms & Conditions

JL Audio offers a 1 year warranty