JL Audio C5-400cm-RP 4″ Component Midrange Driver – 49022


Or as low as $31.66 per month over 6 months. Apply Now.

Condition: New

JL Audio C5-400cm-RP 4″ Component Midrange Driver – 49022

  • Mineral-Filled Polypropylene Cone
  • Butyl Rubber Surround
  • Ferrite Woofer Magnet
  • 1.00″ Voice Coil on Kapton Former
  • Low-Profile, Symmetrical Roll Spider

In stock

Free Shipping
SKU: C5400cmRP Item #: 49022 Category:

Product Description

JL Audio C5-400cm-RP 4″ Component Midrange Driver – 49022

JL Audio C5-400cm-RP superbly-balanced 4-inch (100 mm) mid-range component speaker benefits from Kurt Müller cones and suspensions. The speaker is built on a stamped steel chassis with removable mounting tabs, which allows it to be installed in a variety of mounting applications.

A grille is included, consisting of a black grille tray and a black steel mesh grille. The grille tray also serves as a narrow-diameter mounting flange when the metal ears are removed from the speaker’s frame.

The C5-400cm is designed to operate within a bandwidth of 300 Hz – 5 kHz. No crossover filter is provided with this speaker.


Dynamic Motor Analysis – DMA Optimized Motor

JL Audio’s proprietary Dynamic Motor Analysis system is a powerful suite of FEA-based modeling systems, first developed by JL Audio in 1997 and refined over the years to scientifically address the issue of speaker motor linearity.

This leads to vastly reduced distortion and faithfully reproduced transients… or put simply: tight, clean, articulate bass.

DMA is a Finite Element Analysis (FEA)-based system, meaning that it takes a large, complex problem, breaks it down into small solution elements for analysis and then assembles the data to form an accurate, “big-picture” solution.

DMA’s breakthrough is that it actually considers the effects of power through the coil as well as coil/cone position within the framework of a time-domain analysis.

Elevated Frame Cooling (U.S. Patent #6,219,431 & #6,229,902)

JL Audio’s patented Elevated Frame Cooling design delivers cool air through slots directly above the top-plate to the voice coil of the speaker. This not only enhances power handling, but also sound quality by minimizing dynamic parameter shifts and power compression.


Additional Information


– Continuous Power Handling (RMS): 75 W
– Peak Music Power: 225 W
– Recommended Amplifier Power (RMS): 25 – 150 W / Ch.
– System Efficiency: 89.5 dB @ 1 W / 1 m
– System Nominal Impedance: 4 Ω
– System Frequency Response: 100 Hz – 9 KHz ± 3 dB
– Frame Outer Diameter* (A): 3.94 in / 100 mm
– Grille Tray Outer Diameter(B): 4.76 in / 121 mm
– Motor Outer Diameter (C): 2.83 in / 72 mm
– Frontal Grille Protrusion(E): 0.83 in / 21 mm
– Mounting Hole Diameter (F): 3.625 in / 92 mm
– Mounting Depth (G): 1.62 in / 41 mm

Speaker Design


Speaker Size


RMS Power

56 to 75 Watts

Estimated Shipping

When you add an item to your cart the Estimated Shipping* cost will be shown.  This estimated shipping* cost is accurate to most major city locations across Canada.  If the shipping cost is higher than the estimated shipping* then GibbysESM will contact you for approval before we process your order.

To learn more click Shipping Terms & Conditions

JL Audio Canada 1 Year Limited Warranty


There are no reviews yet.

Be the first to review “JL Audio C5-400cm-RP 4″ Component Midrange Driver – 49022”