JL Audio CP212-W0v3 Subwoofer with Dual 12W0v3 BassWedge, Ported – #93283

Sale!
Save $190.00

$ 689.99 $499.99 (Sale ends on May 28, 2018)

JL Audio CP212-W0v3 #93283 – Subwoofer with Dual 12W0v3 BassWedge, Ported

  • 12″ W0v3 Series Subwoofer Driver
  • Power Handling
  • RMS: 600 watts total / 300 watt per subwoofer
  • Recommended Power Range: 150 – 800 watts total

In stock

Free Shipping
SKU: CP212-W0v3 Item #: 93283 Category:

Product Description

JL Audio CP212-W0v3 Sub w/ JX250/1D Amp and RBC-1 Bass Remote – #93283 – #99402 – #98015 – Bundle

This powerful CP212-W0v3 slot-ported BassWedge™ subwoofer system delivers awesome output at an unsurpassed value.

The slot-port runs along the bottom of the enclosure and fires on the same plane as the woofers to produce excellent extension and response smoothness. The port mouth is flared to minimize air-flow noises.

The ultra-versatile BassWedge™ shape has extended sides so that it can be placed with the woofers firing out or straight down, off the floor of the vehicle. The shape works equally well in forward or rear-firing installations. This gives you plenty of options for tweaking the loading of the enclosure into your vehicle.

This subwoofer system is shipped wired, loaded and ready to connect via a push-button terminal.

Finish: Dark gray, high-grade automotive carpet with “JL AUDIO” embroidery on the top edge and “Slot-Ported BassWedge™” embroidered on the port mouth.

Construction: MDF

Recommended amplifier power: 150 – 600W
Nominal Impedance: 2 Ω

JL Audio CP212-W0v3 Loaded Sub Enclosure

JL Audio’s dual 12″ slot-ported loaded BassWedge subwoofer enclosure has a peak power rating of 1200 watts and an RMS rating of 600 watts. The enclosure is loaded and wired with two JL Audio 12W0v3 single 4-ohm subwoofers. The W0v3 offers superb excursion capability, linearity and an overall performance output that puts it right at the top of its price class. The driver features a very beefy 2.0-inch diameter voice coil, a DMA-optimized motor system and JL Audio’s patented Elevated Frame Cooling design – all purpose-engineered for enhanced power handling and reliability. What this also means, is your system will be immediately injected with the increase in output and better sound fidelity that one expects from a JL Audio product. In addition, excellent excursion capability and linearity allow it to reproduce sub-bass with striking extension and quality. When matched up with the proper power source, signal and setup the W0v3 is capable of a well rounded sound that is unparalleled by any other driver in its price range.

Dynamic JL Audio Performance

Flexible JL Audio Power

The CP212-W0v3 Enclosure can be driven with as little as 150 Watts. However, for best audio performance it is recommended to run an amplifier capable of between 400 – 600 Watts of continuous power per driver, like the JL Audio XD600/1v2 or JL Audio JX500/1D. In addition, The ultra-versatile BassWedge shape has extended sides so that it can be placed with the woofers firing out or straight down, off the floor of the vehicle. The shape works equally well in forward or rear-firing installations. This gives you plenty of options for tweaking the loading of the enclosure into your vehicle.

Striking Linearity and Control

Striking Linearity and Control

DMA is JL Audio’s proprietary Dynamic Motor Analysis system and is aimed at delivering superior dynamic stability and low distortion. As a result of DMA optimization, W0v3 motors remain linear in motor force over an extreme range of excursion and also maintain a highly stable fixed magnetic field in the gap over a wide power range. This leads to tight, clean, articulate bass that also allows for extreme linear excursion, phenomenal power handling and control, control, control.

JL quality at a great price

JL Audio built the BassWedge CP212-W0v3 enclosure to make car-rattling bass for a reasonable price, without the need for a ton of power. The enclosure’s designed to match the two 12″ subs loaded into it, so you know you’ll get every ounce of performance out of this enclosure.

An excellent combination

The CP212-W0v3 BassWedge contains two 12″ W0v3 subwoofers that handle up to 600 watts RMS, and are loaded into a specially built slot-ported enclosure. The enclosure can be placed with the woofers firing downwards, or in typical front or rear firing applications, giving you immense bass regardless of how you place it.

 BassWedge CP212-W0v3 enclosure

Solid MDF enclosure

JL Audio uses state-of-the-art automated woodworking equipment to fabricate the high-quality MDF enclosure with rugged automotive carpeting, nickel-plated push terminals, and solid internal wiring.

Additional Information

Weight 5.6 kg
Specifications

Subwoofer Specifications
– Subwoofer Series W0v3 (JL Audio)
– Subwoofer Size 12″
– Voice Coil(s) Single
– Impedance (Per Voice Coil) 4 ohms
– RMS Power Handling 600 watts
– Total RMS Power Handling 600 watts
– Peak Power Handling 1200 watts
– Total Peak Power Handling 1200 watts
– Woofer Composition Mineral-Filled Polypropylene
– Woofer Surround Rubber
– Sensitivity 85.64 dB
– Frequency Response 22 – 250 Hz
– Xmax (millimeters) 11.4 mm
– Subwoofer Design Round / Circle

Enclosure Specifications
– Box Type Vented / Ported
– Number of Subs/Speakers 2
– Box Style/Shape Hatchback Style, Angled Back
– Height 15-3/16″
– Width 31-3/8″
– Depth 20-5/16″
– Second Depth 15-3/4″
– Wood Thickness Not specified by manufacturer
– Number of Terminals 1
– Terminal Type Binding posts
– Box Exterior Color Gray
– Box Finish Carpet

RMS Power

401 to 800 Watts

Speaker Size

12″

Estimated Shipping

When you add an item to your cart the Estimated Shipping* cost will be shown.  This estimated shipping* cost is accurate to most major city locations across Canada.  If the shipping cost is higher than the estimated shipping* then GibbysESM will contact you for approval before we process your order.

To learn more click Shipping Terms & Conditions

JL Audio Canada 2 Year Limited Manufacturers Warranty.

Reviews

There are no reviews yet.

Be the first to review “JL Audio CP212-W0v3 Subwoofer with Dual 12W0v3 BassWedge, Ported – #93283”