JL Audio CP212-W0v3 Sub | JX 250/1D Amp and RBC-1 Bass Remote – Bundle – #93283 | #99402 | #98015

$859.85

Or as low as $71.65 per month over 12 months. Apply Now.

Condition: New

JL Audio CP212-W0v3 Sub w/ JX250/1D Amp and RBC-1 Bass Remote – #93283 – #99402 – #98015 – Bundle

This Bundle Includes:

(1) JL Audio CP212-W0v3 #93283 – Subwoofer with Dual 12W0v3 BassWedge, Ported
(1) JL Audio JX250/1D #99402 – Monoblock Class D Car Audio Subwoofer Amplifier
(1) JL Audio RBC-1 Car Audio Bass Remote Control 98015

  • 12″ W0v3 Series Subwoofer Driver
  • RMS: 600 watts total / 300 watt per subwoofer
  • Recommended Power Range: 150 – 800 watts total
  • Nominal Impedance: 2-Ohms

Only 1 left in stock

Free Shipping
SKU: CP212W0V3 | JX 250/1D | RBC-1 Item #: 93283 | 99402 | 98015 Category:

Product Description

JL Audio CP212-W0v3 Sub w/ JX250/1D Amp and RBC-1 Bass Remote – #93283 – #99402 – #98015 – Bundle

This CP212-W0v3 Bundle Includes:

(1) JL Audio CP212-W0v3 #93283 – Subwoofer with Dual 12W0v3 BassWedge, Ported
(1) JL Audio JX250/1D #99402 – Monoblock Class D Car Audio Subwoofer Amplifier
(1) JL Audio RBC-1 Car Audio Bass Remote Control 98015

JL Audio CP212-W0v3 #93283 – Subwoofer with Dual 12W0v3 BassWedge, Ported

This powerful CP212-W0v3 slot-ported BassWedge™ subwoofer system delivers awesome output at an unsurpassed value.

The slot-port runs along the bottom of the enclosure and fires on the same plane as the woofers to produce excellent extension and response smoothness. The port mouth is flared to minimize air-flow noises.

The ultra-versatile BassWedge™ shape has extended sides so that it can be placed with the woofers firing out or straight down, off the floor of the vehicle. The shape works equally well in forward or rear-firing installations. This gives you plenty of options for tweaking the loading of the enclosure into your vehicle.

This subwoofer system is shipped wired, loaded and ready to connect via a push-button terminal.

Finish: Dark gray, high-grade automotive carpet with “JL AUDIO” embroidery on the top edge and “Slot-Ported BassWedge™” embroidered on the port mouth.

Construction: MDF

Recommended amplifier power: 150 – 600W
Nominal Impedance: 2 Ω

JL Audio CP212-W0v3 Loaded Sub Enclosure

JL Audio’s dual 12″ slot-ported loaded BassWedge subwoofer enclosure has a peak power rating of 1200 watts and an RMS rating of 600 watts. The enclosure is loaded and wired with two JL Audio 12W0v3 single 4-ohm subwoofers. The W0v3 offers superb excursion capability, linearity and an overall performance output that puts it right at the top of its price class. The driver features a very beefy 2.0-inch diameter voice coil, a DMA-optimized motor system and JL Audio’s patented Elevated Frame Cooling design – all purpose-engineered for enhanced power handling and reliability. What this also means, is your system will be immediately injected with the increase in output and better sound fidelity that one expects from a JL Audio product. In addition, excellent excursion capability and linearity allow it to reproduce sub-bass with striking extension and quality. When matched up with the proper power source, signal and setup the W0v3 is capable of a well rounded sound that is unparalleled by any other driver in its price range.

Dynamic JL Audio Performance

Flexible JL Audio Power

The CP212-W0v3 Enclosure can be driven with as little as 150 Watts. However, for best audio performance it is recommended to run an amplifier capable of between 400 – 600 Watts of continuous power per driver, like the JL Audio XD600/1v2 or JL Audio JX500/1D. In addition, The ultra-versatile BassWedge shape has extended sides so that it can be placed with the woofers firing out or straight down, off the floor of the vehicle. The shape works equally well in forward or rear-firing installations. This gives you plenty of options for tweaking the loading of the enclosure into your vehicle.

Striking Linearity and Control

Striking Linearity and Control

DMA is JL Audio’s proprietary Dynamic Motor Analysis system and is aimed at delivering superior dynamic stability and low distortion. As a result of DMA optimization, W0v3 motors remain linear in motor force over an extreme range of excursion and also maintain a highly stable fixed magnetic field in the gap over a wide power range. This leads to tight, clean, articulate bass that also allows for extreme linear excursion, phenomenal power handling and control, control, control.

JL quality at a great price

JL Audio built the BassWedge CP212-W0v3 enclosure to make car-rattling bass for a reasonable price, without the need for a ton of power. The enclosure’s designed to match the two 12″ subs loaded into it, so you know you’ll get every ounce of performance out of this enclosure.

An excellent combination

The CP212-W0v3 BassWedge contains two 12″ W0v3 subwoofers that handle up to 600 watts RMS, and are loaded into a specially built slot-ported enclosure. The enclosure can be placed with the woofers firing downwards, or in typical front or rear firing applications, giving you immense bass regardless of how you place it.

 BassWedge CP212-W0v3 enclosure

Solid MDF enclosure

JL Audio uses state-of-the-art automated woodworking equipment to fabricate the high-quality MDF enclosure with rugged automotive carpeting, nickel-plated push terminals, and solid internal wiring.

JL Audio JX250/1D #99402 – Monoblock Class D Car Audio Subwoofer Amplifier

This rugged and reliable JL Audio JX250/1D Class D monoblock uses a robust MOSFET power supply design that delivers rock-solid bass performance at a very affordable price.

Targeted specifically for subwoofer applications, it includes a low-pass filter with continuously variable cutoff frequency selection from 50-200 Hz. It also features a variable bass boost at 45 Hz. with up to 12 dB of boost and an optional remote boost control. Dedicated hi-level inputs are included, in addition to conventional low-level RCA inputs and a set of pass-through preamp outputs, making it easy to integrate with a variety of OEM and aftermarket head units.

Lots of power from a very small box

JL Audio’s JX250/1D mono amplifier will power your subwoofer with up to 250 watts RMS, so you can experience powerful bass in your music. A variable low-pass filter and bass boost help you tune your sub to sound its best in your system. An optional remote level control lets you turn the sub up or down from the front seat.

You know you’re holding a serious piece of sound equipment when you feel the heft of this tiny JX amp. JL Audio built it with sturdy, high-grade parts that ensure excellent heat management, provide high current flow, and deliver stable performance in almost any situation. You won’t find blinking lights or meters on the outside of these amps, but you will find oversized output transistors and rugged MOSFET power supplies inside. The high-mass aluminum heatsink keeps things cool enough to virtually eliminate thermal shut-downs.

JL Audio RBC-1 Car Audio Bass Remote Control #98015

The JL Audio RBC-1, is a “Bass Boost” switch that activates a +6dB boost centered at 48 Hz.

JL Audio amplifiers feature bass-boost circuitry to help you adjust low-frequency impact in your vehicle. The RBC-1 wired remote bass control works with all of JL Audio’s A-Series, G-Series, RD Series, mono JX-Series, and most Slash v2 amps. You can mount the RBC-1 controller in the front of your vehicle and dial in the amount of bass you want from the driver’s seat — mounting instructions, hardware, and a 18′ cable are included.

Connect the JL Audio RBC-1 to your amp, and it converts the amp’s selectable bass boost (0 or 6 dB) to a variable boost (0 to 12 dB). With the Slash v2 amps, the RBC-1 takes the place of the amp’s boost knob, allowing you to adjust your bass boost from 0 to 15 dB. With RD Series and JX-Series mono amps, the RBC-1 controls the amp’s subwoofer level, from full mute to full volume.

The RBC-1 remotely controls the Bass Level of the following JL Audio amplifiers

JX-Series: JX250/1JX500/1JX500/1DJX1000/1D
HX-Series: HX300/1 in Low Pass Mode (Note: M-RBC-1 is also available)
MHX-Series: MHX300/1 in Low Pass Mode (Note: M-RBC-1 is also available)

When the JL Audio RBC-1 is connected to the above amplifiers, the on-board “Boost” control of the amplifier is defeated and the RBC-1 becomes the active controller.

The RBC-1 kit includes the rotary control with a black ABS knob, mounting hardware and one 18 ft. (5.5 m) cable.

What’s in the Box:

  • Owners Manual
  • Bass Controller with attached knob and 9″ cord terminated by a female RJ-11 port
  • 18′ control cable with a male RJ-11 connector on each end
  • 2 Nuts
  • 2 Washers
  • Installation Instructions

 

Additional Information

Weight 8.32 kg
CP212-W0v3 Specifications

Subwoofer Specifications
– Subwoofer Series W0v3 (JL Audio)
– Subwoofer Size 12″
– Voice Coil(s) Single
– Impedance (Per Voice Coil) 4 ohms
– RMS Power Handling 600 watts
– Total RMS Power Handling 600 watts
– Peak Power Handling 1200 watts
– Total Peak Power Handling 1200 watts
– Woofer Composition Mineral-Filled Polypropylene
– Woofer Surround Rubber
– Sensitivity 85.64 dB
– Frequency Response 22 – 250 Hz
– Xmax (millimeters) 11.4 mm
– Subwoofer Design Round / Circle

Enclosure Specifications
– Box Type Vented / Ported
– Number of Subs/Speakers 2
– Box Style/Shape Hatchback Style, Angled Back
– Height 15-3/16″
– Width 31-3/8″
– Depth 20-5/16″
– Second Depth 15-3/4″
– Wood Thickness Not specified by manufacturer
– Number of Terminals 1
– Terminal Type Binding posts
– Box Exterior Color Gray
– Box Finish Carpet

RMS Power

401 to 800 Watts

Speaker Size

12″

JX250/1D Specifications

Power Specifications – Subwoofer Channel
– RMS Power @ 4 ohms 160 watts x 1 channels
– RMS Power @ 2 ohms 250 watts x 1 channels

Power Specifications – Full Range Channels
– Peak Power @ 4 ohms 320 watts x 1 channels
– Peak Power @ 2 ohms 500 watts x 1 channels

Amplifier Specifications
– Amplifier Series JX (JL Audio)
– Amplifier Class D
– Number of Channels 1 – Mono
– Maximum Input Gauge Size 8 AWG
– Minimum Impedance Unbridged 2 ohms
– THD at Rated RMS Power 97 dB
– Bass Boost 0 – 12 dB

RBC-1 Specifications

– Slash v3 Series: 600/1v3, 1200/1v3
– Slash v2 Series: 250/1v2, 500/1v2, 1000/1v2, 450/4v2
– Original Slash Series: 500/1, 1000/1, 450/4, 500/5
– G-Series: All Models
– A-Series: All Models
– e-Series: All Models (including marine versions)
– M-Series: M1400, M1700, M2150, M2250, M4300, M4500, – M6450, M6600
Control Bass Level Of
– JX-Series: JX250/1, JX500/1, JX500/1D, JX1000/1D
– HX-Series: HX300/1 in Low Pass Mode
– MHX-Series: MHX300/1 in Low Pass Mode

Compatibility:
The JL Audio RBC-1 Wired Remote Bass Controller is compatible with JL Audio A series, Slash v2 series, Slash v3 series, JX series, and Marine series amplifiers which feature a remote input.

Estimated Shipping

When you add an item to your cart the Estimated Shipping* cost will be shown.  This estimated shipping* cost is accurate to most major city locations across Canada.  If the shipping cost is higher than the estimated shipping* then GibbysESM will contact you for approval before we process your order.

To learn more click Shipping Terms & Conditions

JL Audio 2 Year Limited Manufacturers Warranty

Reviews

There are no reviews yet.

Be the first to review “JL Audio CP212-W0v3 Sub | JX 250/1D Amp and RBC-1 Bass Remote – Bundle – #93283 | #99402 | #98015”