JL Audio CS112LG-TW1-2 PowerWedge 12″ sealed subwoofer enclosure – #93325

$599.95

Or as low as $50.00 per month over 12 months. Apply Now.

Condition: New

JL Audio CS112LG-TW1-2 #93325 PowerWedge 12″ sealed subwoofer enclosure

  • sealed enclosure with one 12″ TW1-2 subwoofer
  • 5/8″ medium density fiberboard construction covered with black carpet
  • steel-mesh grille
  • power range: 75-300 watts
  • impedance: 2 ohms
  • dimensions: 18″W x 13-3/4″H x 6-5/8″D

In stock

Free Shipping
SKU: CS112LG-TW1-2 Item #: 93325 Category:

Frequently Bought Together

JL Audio CS112LG-TW1-2+JL Audio XD300/1v2
Price for both:   $1,179.90

Product Description

JL Audio CS112LG-TW1-2 #93325 PowerWedge 12″ sealed subwoofer enclosure

JL Audio CS112LG-TW1-2 enclosed subwoofer system delivers impressive bass from an enclosure that’s designed to maximize the impact of its TW1-2 driver. This PowerWedge sub handles up to 300 watts RMS, housing a single 12″ 12TW1-2 subwoofer that offers serious low end. The enclosure is designed from the ground up to get optimum performance from its driver, so you get much more than just a box with a speaker inside. And JL Audio designed the TW1-2 speakers specifically for compact enclosures, so you know it’ll deliver maximum performance.

JL Audio uses state-of-the-art automated woodworking equipment to fabricate the high-quality MDF enclosure with rugged automotive carpeting, a steel-mesh grille, 5-way binding posts, and solid internal wiring. The enclosure is built and inspected by hand at the manufacturing facility in Florida to ensure that you get the bass that you expect from JL Audio.

The specially designed enclosure measures a bit over 6 inches deep, so it’ll fit a lot of tight spaces. Its sealed construction and TW1-2 driver keeps your bass rich and clear. You’ll enjoy deep low-frequency response from all of your music with this capable enclosure in your vehicle.

In this low-profile JL Audio CS112LG-TW1-2  system, we harness the performance and insanely small box requirements of the TW1 subwoofer driver to deliver amazing sub-bass from an enclosure that is only 6.6 in. (168 mm) deep.

This low-profile enclosure design has been carefully engineered to the optimum sealed enclosure alignment for the 12TW1 and has been fine-tuned through extensive real-world listening.

The PowerWedge subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal.

Finish: Black, high-grade automotive carpet with “JL AUDIO” embroidered in silver on the top surface of the enclosure. A steel mesh grille is included to protect the subwoofer driver.

Construction: CNC-Cut High-Grade MDF

Recommended amplifier power: 75 – 300W

Concentric Tube Suspension

Concentric Tube Suspension

JL Audio’s patented solution to overcome the lack of mechanical clearance, presented by “low profile subwoofers”, employs a molded structure which spans over the edge of the motor system, supporting the spider on the outside of the motor’s boundaries and the large diameter voice coil on the inside. The large diameter voice coil permits the magnet to sit inside it, rather than surrounding the coil as is typical in most woofers. The concentric tube structure and the elimination of a conventional top-plate helps place the motor system higher up into the cone body’s space to further compress depth, while still permitting excellent mechanical excursion.

Additional Information

Weight 11.80 kg
Specifications

Subwoofer Features:
– 12″ TW1 (Thin-Line) Series Shallow Mount Subwoofer
– Power Handling: RMS: 300 watts
– Recommended Power Range: 75 – 300 watts
– Injection molded, mica-filled polypropylene cone
– Rubber surround
– No pole vent: permits mounting close to rear wall of enclosure.
– Ultra-compact sealed enclosure volume requirements
– Long linear excursion capability
– DMA-optimized motor designs
– Engineered Lead-Wire System
– Patented concentric tube architecture
– Patented floating cone attach method technology
– Cast alloy frame with flat edges for tight driver grouping
– Steel mesh grille included with each driver
– Precision-built in USA at JL Audio Miramar, Florida factory
– Steel Mesh Grille Included
– Mounting depth: 4.62 ”
– Cutout dimensions: 11.0625 ”
– Free Air Resonance (Fs): 35.06 Hz
– Sensitivity: 85.07 dB
– Xmax: 10.0 mm
– Equivalent Compliance (Vas): 28.54 L
– Frequency response: ~24 ~ 200 Hz
– Matching Amplifiers:
– JL Audio XD300/1v2
– JL Audio JX250/1D
– 2 Year Manufacturer’s Warranty

Enclosure Features:
– Impedance: 2-Ohm
– Enclosure Dimensions: 6.625″ D x 18.00″ W x 13.75″ H
– Black, high-grade automotive carpet
– JL AUDIO embroidered in silver on the top surface
– CNC-Cut High-Grade MDF construction
– Steel mesh grille included with each driver
– Binding post terminals

Color

Black

Estimated Shipping

When you add an item to your cart the Estimated Shipping* cost will be shown.  This estimated shipping* cost is accurate to most major city locations across Canada.  If the shipping cost is higher than the estimated shipping* then GibbysESM will contact you for approval before we process your order.

To learn more click Shipping Terms & Conditions

JL Audio 2 Year Limited Warranty

Reviews

There are no reviews yet.

Be the first to review “JL Audio CS112LG-TW1-2 PowerWedge 12″ sealed subwoofer enclosure – #93325”