JL Audio CS212-WXV2 Subwoofer with Dual 12″ WX Drivers and JL Audio MDF Enclosure
JL quality at a great price
JL Audio CS212-WXv2 built their enclosure to make car-rattling bass for a reasonable price, without the need for a ton of power. The enclosure’s designed to match the two 12″ subwoofers loaded into it, so you know you’ll get every ounce of performance out of this system.
An excellent combination
The JL Audio CS212-WXv2 BassWedge contains two 12″ WXv2 subwoofers that together handle up to 400 watts RMS, loaded into a specially built sealed enclosure. You’ll enjoy punchy, detailed bass without taking up too much room in your vehicle’s trunk or cargo area.
Solid MDF enclosure
JL Audio uses state-of-the-art automated woodworking equipment to fabricate the high-quality MDF enclosure with rugged automotive carpeting, nickel-plated push terminals, and solid internal wiring.
Overview: The JL Audio BassWedge sealed subwoofer enclosure is designed around two of JL Audio’s 12″ WXv2 (4Ω) subwoofers, delivering tight, powerful bass. The MDF enclosure is covered with gray carpet and has a JL AUDIO logo embroidered across the top.
Speaker Terminal: The enclosure uses one pair of high current spring posts; the subwoofers are internally wired in parallel to a single terminal, presenting a 2Ω load to the amplifier. The posts are located on the left side of the box and will accept pin connectors, single or dual banana plugs, or bare wire up to 10 gauge.
WXv2 Woofer Features:
- Dynamic Motor Analysis (DMA): DMA is a JL Audio proprietary method of improving dynamic motor behavior. As a result of DMA optimization, the woofer’s motor remains linear in motor force over a long excursion range, and maintains a stable fixed magnetic field in the gap over a wide power range. The result is reduced distortion, faithfully reproduced transients, and tight, clean, articulate bass.
- Elevated Frame Cooling: The elevated frame design of the 12WXv2 delivers cool air through slots directly above the top-plate to the voice coil. This not only enhances power handling, but also sound quality by minimizing dynamic parameter shifts and power compression.
- Rear Gasket: The woofer has an integrated foam rear gasket which provides an optimal seal when installing into the enclosure.
Optional Grille: The optional SGRU-12 grilles can be added to protect the woofer cones.