JL Audio G213v2-GLOSS Dual 13.5″ Powered Subwoofer


Or as low as $1,666.58 per month over 12 months. Apply Now.

JL Audio G213v2-GLOSS Dual 13.5-inch Powered Subwoofer

  • Dynamic Motor Analysis – DMA Optimized Motor
  • Engineered Lead-Wire System
  • Floating Cone Attach Method
  • 4500 W RMS short-term
  • 30 Hz – 130 Hz Frequency Range

In stock

Free Shipping
SKU: G213v2GLOSS Category:

Product Description

JL Audio G213v2-GLOSS Dual 13.5-inch Powered Subwoofer

JL Audio G213v2-GLOSS subwoofer system with limits that exceed the needs of the typical home theater application, delivering a weight and integrity of reproduction that can only come from a system that is always in control. Its allure lies as much in its ability to convey subtleties as in its prodigious output capabilities.

The G213v2-GLOSS include a highly flexible low-pass filter, variable phase, switchable polarity, e.l.f. trim and our powerful Digital Automatic Room Optimization (D.A.R.O.) system. A calibrated microphone is included for the D.A.R.O. system. Input connections are made via unbalanced RCA connections or balanced Neutrik® combo XLR/TRS jacks. Also included is an XLR output to connect a second Gotham® v2 as a slave unit.

Digital Automatic Room Optimization (D.A.R.O.)

JL Audio’s exclusive D.A.R.O. technology uses a powerful on-board DSP to automatically optimize the subwoofer’s in-room frequency response. This leads to a superb listening experience, no matter where the subwoofer is placed.

Dynamic Motor Analysis – DMA Optimized Motor

JL Audio’s proprietary Dynamic Motor Analysis system is a powerful suite of FEA-based modeling systems, first developed by JL Audio in 1997 and refined over the years to scientifically address the issue of speaker motor linearity. This leads to vastly reduced distortion and faithfully reproduced transients… or put simply: tight, clean, articulate bass.

Floating Cone Attach Method – FCAM™ 

This assembly technique, conceived by JL Audio, ensures proper surround geometry in the assembled speaker for better excursion control and dynamic voice coil alignment.

Engineered Lead-Wire System

Carefully engineered lead-wire design and attachments ensure controlled, quiet lead-wire behavior under the most extreme excursion demands.

Radially Cross-Drilled Pole-Piece

This innovative venting system greatly enhances thermal dissipation and power handling by directing air flow onto the voice coil former, working in conjunction with the Elevated Frame cooling technology to effectively remove heat from the voice coil. This improves power handling and reduces power compression effects, leading to more linear performance.

Additional Information

Weight 165 kg

– Enclosure Type: Sealed, with non-parallel walls
– Enclosure Finish: Black Gloss
– Effective Piston Area (Sd): 214.70 sq in / 0.1386 sq m
– Effective Displacement: 773 cu in / 12.7 L
– Filter Frequency Range: 30 Hz – 130 Hz
– Amplifier Power: 4500 W RMS short-term
– Power Mode(s): Off, On or Automatic (Signal-Sensing)
– Light Modes: Off, On or Dim
– Filter Defeat Function: Yes

– Width (W): 21.50 in / 546 mm
– Height (H): 34.13 in / 867 mm
– Depth (D): 24.0 in / 610 mm
– Net Weight: 360 lb / 163 kg

Home Subwoofer Size


Subwoofer Features



Gloss Black

Estimated Shipping

When you add an item to your cart the Estimated Shipping* cost will be shown.  This estimated shipping* cost is accurate to most major city locations across Canada.  If the shipping cost is higher than the estimated shipping* then GibbysESM will contact you for approval before we process your order.

To learn more click Shipping Terms & Conditions

JL Audio Canada 1 Year Limited Warranty