1.866.696.7189

Local 289.275.1050

JL Audio FiX86 OEM Integration Digital Sound Processor – #98103

Model 98103 Category

$579.95

JL Audio JLFIX86 OEM Integration DSP Digital EQ – #98103

  • 8-ch. Inputs and 4-ch. Stereo
  • 2 Subwoofer and RCA Outputs
  • Automatic Time Correction
  • Digital EQ

Availability: In stock

Free Shipping
QUESTIONS?

Please feel free to contact us!

$579.95

Finance with 12 equal monthly payments and 0% interest. *Estimate $137 /month +taxes   → Learn More

JL Audio JLFIX86 OEM Integration DSP Digital EQ – #98103

  • 8-ch. Inputs and 4-ch. Stereo
  • 2 Subwoofer and RCA Outputs
  • Automatic Time Correction
  • Digital EQ

Availability: In stock

Free Shipping

Questions?

Give us a call toll free 1-866-696-7189
Send us an email support@Gibbysesm.ca

Questions?

Give us a call toll free 1-866-696-7189 Send us an email support@Gibbysesm.ca

JL Audio JLFIX86 OEM Integration DSP Digital EQ – #98103

JL Audio JLFIX86 is a state-of-the-art digital signal processor engineered to deliver outstanding sound from factory source units, while retaining OEM fader control.

Unlike typical OEM interface products, JL Audio JLFIX86 automatically corrects time-delayed factory outputs prior to signal summing and EQ correction. Calibration takes just a single button press and about 30 seconds to complete, with no special equipment needed.

With a powerful 24-bit DSP processor and quad 1/3 octave equalizers onboard, complex factory signals, up to 3-way front and 2-way rear, are combined and level matched automatically into six, full-range stereo signals: Front (fader-controlled), Rear (fader-controlled) and Subwoofer (non-fading, front+rear summed) outputs.

By connecting a PC running TüN™ 2.0 Software via USB, you can also access a complete suite of diagnostic panels that show the frequency response of input signals, as well as the corrected outputs. Adjustments can be made to input polarity, muting, and filtering, and new calibrations can be initiated from the PC as well. By clicking on the “TUNE” tab of the TüN™ 2.0 interface, you can also access four, user-adjustable, 10-band, graphic equalizers to fine tune the output signals.

Differential-balanced inputs accept virtually any OEM analog audio signal, from low-voltage, line-level to high-power, amplified speaker-level outputs (up to 30V RMS).

Activation methods include 12-volt or Auto Turn-On (Signal/DC-Offset Sensing) to trigger a dedicated remote turn-on output for aftermarket equipment.

An optional DRC-100 or DRC-200 Digital Remote Controller (sold separately) adds Master Volume Control and/or Subwoofer Level Control from the driver’s seat.

Achieving great sound from your factory stereo has never been easier, or sounded better… Now with fader retention and subwoofer output.

Technology: Built-in U.S.A. with Global Components

JL Audio’s Miramar, Florida loudspeaker production facility is one of the most advanced in the world

At a time when most audio products are built overseas, JL Audio’s commitment to in-house loudspeaker production continues to grow. To pull this off in a competitive world market, JL Audio’s production engineering team has created one of the world’s most advanced loudspeaker assembly facilities and established a global network of quality component suppliers who build to our specifications. This, combined JL Audio’s commitment to state-of-the-art assembly technology, allows skilled workforce to efficiently build JL Audio products to extremely high quality standards, right here in the U.S.A.

Since most of JL Audio’s premium loudspeakers incorporate proprietary, patented technologies requiring specific assembly techniques, JL Audio find it is vital that the people who designed them have close access to the people manufacturing them. The following JL Audio products are built in Miramar, Florida factory, with global components.

Specifications

Features
– Power Supply Type: Regulated DC-DC SMPS
– Input Operating Voltage: 10 – 16 VDC
– Operating Current Draw: 0.7 A
– Recommended Fuse Value: 1 A

Power
– Input Channels: Eight
– Input Type: Differential-Balanced
– Input Voltage Range: 250 mV – 30 V RMS
– Minimum Input Voltage: 10 mV RMS
– Input Level Setting: Fully automatic
– Output Channels: Six (Front/Rear/Sub Output Pairs)
– Analog Output: Unbalanced, stereo RCA jacks
– Digital Output: N/A
– Output Impedance: 450 Ω
– S/N Ratio: 96 dB (A-Weighted, referred to 4V RMS Output)
– THD+N @ Rated Output: 0.02% (20 Hz – 20 kHz)

Estimated Shipping

When you add an item to your cart the Estimated Shipping* cost will be shown.  This estimated shipping* cost is accurate to most major city locations across Canada.  If the shipping cost is higher than the estimated shipping* then GibbysESM will contact you for approval before we process your order.

To learn more click Shipping Terms & Conditions

JL Audio Canada 1 Year Limited Warranty

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Recently Viewed Products

JL Audio JLFIX86 OEM Integration DSP Digital EQ – #98103

JL Audio JLFIX86 is a state-of-the-art digital signal processor engineered to deliver outstanding sound from factory source units, while retaining OEM fader control.

Unlike typical OEM interface products, JL Audio JLFIX86 automatically corrects time-delayed factory outputs prior to signal summing and EQ correction. Calibration takes just a single button press and about 30 seconds to complete, with no special equipment needed.

With a powerful 24-bit DSP processor and quad 1/3 octave equalizers onboard, complex factory signals, up to 3-way front and 2-way rear, are combined and level matched automatically into six, full-range stereo signals: Front (fader-controlled), Rear (fader-controlled) and Subwoofer (non-fading, front+rear summed) outputs.

By connecting a PC running TüN™ 2.0 Software via USB, you can also access a complete suite of diagnostic panels that show the frequency response of input signals, as well as the corrected outputs. Adjustments can be made to input polarity, muting, and filtering, and new calibrations can be initiated from the PC as well. By clicking on the “TUNE” tab of the TüN™ 2.0 interface, you can also access four, user-adjustable, 10-band, graphic equalizers to fine tune the output signals.

Differential-balanced inputs accept virtually any OEM analog audio signal, from low-voltage, line-level to high-power, amplified speaker-level outputs (up to 30V RMS).

Activation methods include 12-volt or Auto Turn-On (Signal/DC-Offset Sensing) to trigger a dedicated remote turn-on output for aftermarket equipment.

An optional DRC-100 or DRC-200 Digital Remote Controller (sold separately) adds Master Volume Control and/or Subwoofer Level Control from the driver’s seat.

Achieving great sound from your factory stereo has never been easier, or sounded better… Now with fader retention and subwoofer output.

Technology: Built-in U.S.A. with Global Components

JL Audio’s Miramar, Florida loudspeaker production facility is one of the most advanced in the world

At a time when most audio products are built overseas, JL Audio’s commitment to in-house loudspeaker production continues to grow. To pull this off in a competitive world market, JL Audio’s production engineering team has created one of the world’s most advanced loudspeaker assembly facilities and established a global network of quality component suppliers who build to our specifications. This, combined JL Audio’s commitment to state-of-the-art assembly technology, allows skilled workforce to efficiently build JL Audio products to extremely high quality standards, right here in the U.S.A.

Since most of JL Audio’s premium loudspeakers incorporate proprietary, patented technologies requiring specific assembly techniques, JL Audio find it is vital that the people who designed them have close access to the people manufacturing them. The following JL Audio products are built in Miramar, Florida factory, with global components.

Specifications

Features
– Power Supply Type: Regulated DC-DC SMPS
– Input Operating Voltage: 10 – 16 VDC
– Operating Current Draw: 0.7 A
– Recommended Fuse Value: 1 A

Power
– Input Channels: Eight
– Input Type: Differential-Balanced
– Input Voltage Range: 250 mV – 30 V RMS
– Minimum Input Voltage: 10 mV RMS
– Input Level Setting: Fully automatic
– Output Channels: Six (Front/Rear/Sub Output Pairs)
– Analog Output: Unbalanced, stereo RCA jacks
– Digital Output: N/A
– Output Impedance: 450 Ω
– S/N Ratio: 96 dB (A-Weighted, referred to 4V RMS Output)
– THD+N @ Rated Output: 0.02% (20 Hz – 20 kHz)

Estimated Shipping

When you add an item to your cart the Estimated Shipping* cost will be shown.  This estimated shipping* cost is accurate to most major city locations across Canada.  If the shipping cost is higher than the estimated shipping* then GibbysESM will contact you for approval before we process your order.

To learn more click Shipping Terms & Conditions

JL Audio Canada 1 Year Limited Warranty

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Need Help?
Get Expert Support

1-866-696-7189

Call us Toll Free
Email Us

Get Expert Advice

Need Help?
Get Expert Support
1-866-696-7189

Call us Toll Free

Email Us

Call us Toll Free

preloader