JL Audio M1000/5v2 5 Ch. 1000 Watt Class D Marine Amplifier – #98358

Brand:
Model Number: M1000/5v2
UPC: 699440983587
Model Number: M1000/5v2
UPC: 699440983587
Free Shipping

Save $600.95

$899.00

$1,499.95

|

OR

|

Payments as low as

$74.92/mo

PayBright
Special Order

JL Audio M1000/5v2 5 Ch. 1000 Watt Class D Marine Amplifier – #98358

  • White and gray powder-coat finishes, gasketed control cover, and stainless steel hardware
  • Variable high-pass filter on front channels (49-4830 Hz, 12 dB per octave)
  • Variable high- or bandpass filters on rear channel (49-483 Hz, 12 dB per octave)
  • Low-pass filter on subwoofer channel (49-483 Hz, 12 or 24 dB per octave)
Special Order

Product Description

Features & Specifications

Documents

Warranty

JL Audio M1000/5v2 5 Ch. 1000 Watt Class D Marine Amplifier – #98358

5-Channel Class D Marine System Amplifier, 100 W x 4 @ 2 Ω + 600 W x 1 @ 2 Ω – 14.4V

Here is the perfect, all-in-one solution to drive a potent 4-speaker + dual subwoofer marine audio system. The M1000/5v2 delivers up to 1000 W of clean power and can comfortably drive two pairs of quality component speaker systems with 75 W x 4 @ 4 Ω, while also delivering a stout 600 W of power to a dual subwoofer system. The breakthrough that makes this much power possible in such a small chassis is our NexD™ switching amplifier design.

The M1000/5v2 includes a 12 dB / octave high-pass filter for one main channel pair, a 12 dB octave high-pass or bandpass filter for the other main channel pair, plus a variable slope low-pass filter for its subwoofer channel. All three filters offer continuously variable cutoff frequency selection from 50-500 Hz. This amplifier’s filters can also be configured as a true 3-way crossover, with a low-pass filter for the subwoofer channel, a bandpass filter on Ch. 3 & 4, and a high-pass filter on Ch. 1 & 2. An “x10” multiplier switch on the Ch. 1 & 2 high-pass filter allows its cutoff frequency to be adjusted from 50-500 Hz or 500-5000 Hz.

With the addition of an HD-RLC remote level control (sold separately), the amplifier’s subwoofer output level or master volume for all channels can be directly controlled from the helm. The M1000/5v2 also features the v2 Spec feature set, which consists of automatic turn-on capability (via signal sensing or DC-offset sensing), and a dual-range differential-balanced input section able to handle a wide range of input voltage levels.

This amplifier features white and gray powder-coat finish, a gasketed cover for the controls and stainless steel hardware for durability in the marine environment.

Physical Specifications:

Height (H) 2.05 in / 52 mm
Width (W) 14.73 in / 374 mm
Depth (D) 7.09 in / 180 mm

Model M1000/5V2
Product: JL Audio M1000/5v2 5 Ch. 1000 Watt Class D Marine Amplifier – #98358
Weight 0.00 kg
Mobile Amplifier Channels

5 Channel

Mobile Amplifier RMS

61 to 89 watts

Mobile Amplifier Class

Class D

Mobile Amplifier Fuse Rating

80

Mobile Amplifier Features

Speaker Level Inputs

Rated Continuous (RMS) Power @ 14.4 V

– Main Channels @ 4 Ω: 75 W RMS x 4
– Main Channels @ 2 Ω: 100 W RMS x 4
– Main Channels – Bridged @ 4Ω: 200 W RMS x 2
– Subwoofer Channel @ 4 Ω: 400 W RMS x 1
– Subwoofer Channel @ 3 Ω: 500 W RMS x 1
– Subwoofer Channel @ 2 Ω: 600 W RMS x 1
– Subwoofer Channel @ 1.5 Ω: N/A

Rated Continuous (RMS) Power @ 12.5 V

– Main Channels @ 4 Ω: 60 W RMS x 4
– Main Channels @ 2 Ω: 90 W RMS x 4
– Main Channels – Bridged @ 4Ω: 180 W RMS x 2
– Subwoofer Channel @ 4 Ω: 360 W RMS x 1
– Subwoofer Channel @ 3 Ω: 480 W RMS x 1
– Subwoofer Channel @ 2 Ω: 600 W RMS x 1
– Subwoofer Channel @ 1.5 Ω: N/A

General Specifications

– Frequency Response (Main Channels): 12 Hz – 22 kHz (+0, -1dB)
– Frequency Response (Subwoofer Channel): 10 Hz – 1 kHz (+0, -1dB)
– S/N Ratio, referred to highest rated power (Main Channels): >104 dB below rated power (A-weighted, 20 Hz – 20 kHz noise – bandwidth)
– S/N Ratio, referred to 1 W: >84 dB (A-weighted, 20 Hz – 20 kHz noise bandwidth)
– Damping Factor @ 4 Ω >150 / 50 Hz
– Damping Factor @ 2 Ω >75 / 50 Hz
– THD+N @ Rated Power (Main Channels): <1% @ 2 Ω per Ch.
– THD+N @ Rated Power (Subwoofer Channels): <1% @ 2 Ω per Ch.
– Input Voltage Range @ RCA Inputs: Switchable from 200 mV – 2 V RMS (Low) to 800 mV – 8 V RMS (High)
– Min.Copper Power / Ground Wire Gauge: 4 AWG wire
– Fuse Rating: 80 A (AFS, AGU or MaxiFuse™)

Signal Processing

– Filter Mode(s): Channels 1 & 2 (front): High-Pass only
– Filter Slope(s): Channels 1 & 2 (front): 12 dB/octave
– Filter Frequency Range: Channels 1 & 2 (front): 50 Hz – 5 kHz
– Filter Mode(s): Channels 3 & 4 (rear): High-Pass or Bandpass
– Filter Slope(s): Channels 3 & 4 (rear): 12 dB/octave
– Filter Frequency Range: Channels 3 & 4: 50 Hz – 500 Hz
– Filter Mode(s): Subwoofer Channel: Low-Pass only
– Filter Slope(s): Subwoofer Channel: 12/24 dB/octave
– Filter Frequency Range: Subwoofer Channel: 50 Hz – 500 Hz
– Detented, Calibrated Filter Freq. Potentiometers: Yes
Filter Defeat Function: Yes
Infrasonic Filter: Subwoofer Channel: none
Remote Level Control: Optional (HD-RLC)
Remote Level Modes: Sub Ch. or All Channels
Channel Input Mode Switch: Yes (2/4/6 ch.)
Pass-Through Preamp Output: None
Source Channel Selection for PreOuts: N/A

Estimated Shipping

When you add an item to your cart the Estimated Shipping* cost will be shown.  This estimated shipping* cost is accurate to most major city locations across Canada.  If the shipping cost is higher than the estimated shipping* then GibbysESM will contact you for approval before we process your order.

To learn more click Shipping Terms & Conditions

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Save $600.95

$899.00

$1,499.95

|

OR

|

Payments as low as

$74.92/mo

PayBright
Special Order
FAST & FREE SHIPPING
ON MOST ORDERS*
LOWEST PRICE
GUARANTEE
KNOWLEDGABLE
CUSTOMER SERVICE
30 DAY RETURN
POLICY
preloader