JL Audio RBC-1 Car Audio Bass Remote Control 98015
The JL Audio RBC-1, is a “Bass Boost” switch that activates a +6dB boost centered at 48 Hz.
JL Audio amplifiers feature bass-boost circuitry to help you adjust low-frequency impact in your vehicle. The RBC-1 wired remote bass control works with all of JL Audio’s A-Series, G-Series, RD Series, mono JX-Series, and most Slash v2 amps. You can mount the RBC-1 controller in the front of your vehicle and dial in the amount of bass you want from the driver’s seat — mounting instructions, hardware, and a 18′ cable are included.
Connect the JL Audio RBC-1 to your amp, and it converts the amp’s selectable bass boost (0 or 6 dB) to a variable boost (0 to 12 dB). With the Slash v2 amps, the RBC-1 takes the place of the amp’s boost knob, allowing you to adjust your bass boost from 0 to 15 dB. With RD Series and JX-Series mono amps, the RBC-1 controls the amp’s subwoofer level, from full mute to full volume.
The RBC-1 remotely controls the Bass Level of the following JL Audio amplifiers
JX-Series: JX250/1, JX500/1, JX500/1D, JX1000/1D
HX-Series: HX300/1 in Low Pass Mode (Note: M-RBC-1 is also available)
MHX-Series: MHX300/1 in Low Pass Mode (Note: M-RBC-1 is also available)
When the JL Audio RBC-1 is connected to the above amplifiers, the on-board “Boost” control of the amplifier is defeated and the RBC-1 becomes the active controller.
The RBC-1 kit includes the rotary control with a black ABS knob, mounting hardware and one 18 ft. (5.5 m) cable.
What’s in the Box:
- Owners Manual
- Bass Controller with attached knob and 9″ cord terminated by a female RJ-11 port
- 18′ control cable with a male RJ-11 connector on each end
- 2 Nuts
- 2 Washers
- Installation Instructions
Product: JL Audio RBC-1 Car Audio Bass Remote Control – #98015
|Control Bass EQ Boot Feature Of
– Slash v3 Series: 600/1v3, 1200/1v3
– Slash v2 Series: 250/1v2, 500/1v2, 1000/1v2, 450/4v2
– Original Slash Series: 500/1, 1000/1, 450/4, 500/5
– G-Series: All Models
– A-Series: All Models
– e-Series: All Models (including marine versions)
– M-Series: M1400, M1700, M2150, M2250, M4300, M4500, – M6450, M6600
|Control Bass Level Of
– JX-Series: JX250/1, JX500/1, JX500/1D, JX1000/1D
– HX-Series: HX300/1 in Low Pass Mode
– MHX-Series: MHX300/1 in Low Pass Mode
The JL Audio RBC-1 Wired Remote Bass Controller is designed to remotely control the Bass EQ boost or Input Level feature of JL Audio amplifier equipped with a "Remote Bass" or "Remote Level" port. When the RBC-1 is connected, the on-board "Boost" control of the amplifier is defeated and the RBC-1 becomes the only active boost controller.
The JL Audio RBC-1 Wired Remote Bass Controller is compatible with JL Audio A series, Slash v2 series, Slash v3 series, JX series, and Marine series amplifiers which feature a remote input.
When you add an item to your cart the Estimated Shipping* cost will be shown. This estimated shipping* cost is accurate to most major city locations across Canada. If the shipping cost is higher than the estimated shipping* then GibbysESM will contact you for approval before we process your order.
To learn more click Shipping Terms & Conditions
JL Audio 2 Year Limited Warranty.
Only logged in customers who have purchased this product may leave a review.