Klipsch AW-650W 6.5″ Outdoor Speakers – Pair – White

This Klipsch AW-650W Is Priced And Sold As A Pair

The Klipsch AW-650W all-weather loudspeaker was designed for customers who expect great sound in the great outdoors. Upholding the same high-quality standards as our indoor products this full-range model delivers a level of performance that’s like nothing you’ve heard in an outdoor speaker before.

Featuring a 6.5-inch IMG woofer 1-inch titanium dome tweeter mated to a square Tractrix Horn durable UV-resistant enclosure non-corrosive grille easy draining input cup heavy gauge zinc C-bracket and 3/8″-16 threaded inserts the Klipsch AW-650W can be mounted almost anywhere and still deliver clean clear and dynamic performances. Whether you want to enjoy your favorite music by the pool on the patio or in your yard the Klipsch AW-650W has what it takes to put you in a state somewhere between utter disbelief and sheer joy.

Whether you want to enjoy your favorite music by the pool, the patio, or your yard, the Klipsch AW-650W uses Klipsch-proprietary technology to bring a full sound to life – outdoors.

The Great Outdoors

Upholding the same high-quality standards as our indoor products, this Klipsch AW-650W full-range model delivers a level of performance that’s like nothing you’ve heard in an outdoor speaker before.

Connections

Proper connection of your speakers to your amplifier or receiver is vital to obtaining good sound quality. Please follow these directions carefully. Sloppy connections can cause amplifier malfunction or damage. We recommend that you use 16-gauge or heavier stranded copper wire. Use a lower gauge (heavier) wire for longer runs to reduce the amount of amplifier power lost due to the wire’s resistance.

Wall Mounting

Included with your Klipsch AW-650W speakers are “C” style mounting brackets constructed of weather resistant, powder-coated zinc. These brackets attach to the speaker with the supplied low profile knobs that thread onto the top and bottom studs protruding from the cabinet. This allows the speaker to be angled to the left or right when mounted vertically, or up and down when mounted horizontally.

After determining the desired location and orientation of your speakers, remove the bracket from the loudspeaker and use it as a template to mark the location of the mounting holes. Check the alignment of the holes with a torpedo level before drilling the pilot hole. Use #10-12 2.5” –3” long pan head screws to attach the bracket into a wall stud. Affix the speaker to the bracket with the supplied knobs. Be sure to leave enough clearance between the end of the bracket and any adjacent wall or ceiling for installation of the knobs.