Klipsch PRO-1200SW 12″ In-Wall Subwoofer (2) | Klipsch RSA-500 In-Wall Amplifier (2) Bundle
Klipsch PRO-1200SW 12″ In-Wall Subwoofer – (2)
In a league of its own at only 3.75″ deep, the Klipsch PRO-1200SW sits perfectly between two studs long before the drywall goes up. A 12” Cerametallic Woofer delivers premium low frequencies that’s enhanced by its tall MDF enclosure for optimal bass response.
HIDDEN HIGH PERFORMANCE
A true subwoofer for both music and movies, the PRO-1200SW provides clean, dynamic, powerful low frequencies while its behind the-drywall design keeps it hidden from view. Simple, easy-to-install design allows for direct, secure installation into a new construction standard 16” OC stud bay using included wood screws for retrofit or new construction. The drywall can be installed over the front face of the cabinet, with a 14”x 14” cutout exposing the driver.
HIGH PERFORMANCE ACOUSTICS
12” long-throw Cerametallic woofer with reverse rolled surround provides dynamic, balanced, powerful low frequencies – all within a traditional stud bay. Maximize the output and acoustic performance using the KDA Series DSP amplifiers, which include presets for optimized EQ and limiter settings custom designed by Klipsch engineers specifically for the PRO-1200SW.
The durable, robust MDF enclosure, provides accurate, powerful low frequencies while helping to isolate sound from neighboring rooms.
MAGNETIC, PAINTABLE GRILLE
Magnetic, bezel-free, paintable grille blends seamlessly into even the most luxurious of living spaces and home theaters.
Klipsch RSA-500 Amp In-Wall 500W Subwoofer Amplifier – (2)
This Klipsch RSA-500 high-powered device will drive up to two of any of these subwoofer modules and delivers 300 watts into an 8-ohm load (one subwoofer module) and 500 watts into a 4-ohm load (two subwoofer modules). It also comes with rack ears for fast and secure placement into any standard 19-inch rack.
To keep end users from inadvertently tampering with performance levels the majority of the RSA-500’s controls are housed on its rear panel. The fuse is also included on the back for quick and easy replacement. A detachable IEC power cord allows for the simple removal and reinstallation of the entire amplifier unit. The Klipsch RSA-500 was also designed to “play nice” by offering standard input/output connectivity that will support any type of system.
While the RSA-500 subwoofer amplifier was primarily designed for use with the RW-5802 in wall subwoofer, it also features custom settings for the AW-800-SW outdoor subwoofer and the RW-5101-C in-ceiling subwoofer.
EQ switch for use with different subwoofers , Selectable signal-sensing or voltage triggered auto-on/off circuit , 300 watts continuous into 8 ohms or 500 watts continuous into 4 ohms , Line and speaker level inputs , Rack ears included.