Klipsch RW-5802-II Passive in-wall subwoofer | Klipsch RSA-500 Subwoofer Amplifier Bundle
Klipsch RW-5802-II Passive in-wall subwoofer – Black
Klipsch RW-5802-II Passive in-wall subwoofer Capturing all the sonic excitement of low-frequency effects without taking up valuable floor space, the RW-5802 in-wall subwoofer is certainly a force to be reckoned with. When combined with the RSA-500 dedicated subwoofer amplifier this hard-hitter perfectly anchors an architectural home theater or two-channel system.
Fitting standard 2- by 4-inch construction the easy-to-install RW-5802 can accommodate any new or existing structure with a minimum 0.5-inch dry wall surface. Because it features an MDF baffle with a reinforced composite sealed enclosure this high-powered passive module subwoofer provides guaranteed performance and minimizes sound transfer into adjacent rooms.
The RW-5802 gets its deep-driving bass courtesy of dual 8-inch long-throw woofers. These exclusive drivers feature stiff well-damped Cerametallic™ cones a specially treated aluminum that has been anodized or electrochemically transformed into ceramic on both outer surfaces. Second only to diamond in strength this ceramic compound allows the woofers to move at high speeds without blurring the sound like conventional designs.
Designed to power the RW-5802 the RSA-500 amplifier will drive up to two subwoofer modules and delivers 300 watts into an 8-ohm load (one subwoofer module) and 500 watts into a 4-ohm load (two subwoofer modules). It also comes with rack ears for quick and easy installation.
Klipsch RSA-500 Amp In-Wall 500W Subwoofer Amplifier
This Klipsch RSA-500 high-powered device will drive up to two of any of these subwoofer modules and delivers 300 watts into an 8-ohm load (one subwoofer module) and 500 watts into a 4-ohm load (two subwoofer modules). It also comes with rack ears for fast and secure placement into any standard 19-inch rack.
To keep end users from inadvertently tampering with performance levels the majority of the RSA-500’s controls are housed on its rear panel. The fuse is also included on the back for quick and easy replacement. A detachable IEC power cord allows for the simple removal and reinstallation of the entire amplifier unit. The Klipsch RSA-500 was also designed to “play nice” by offering standard input/output connectivity that will support any type of system.
While the RSA-500 subwoofer amplifier was primarily designed for use with the RW-5802 inwall subwoofer, it also features custom settings for the AW-800-SW outdoor subwoofer and the RW-5101-C in-ceiling subwoofer.
EQ switch for use with different subwoofers , Selectable signal-sensing or voltage triggered auto-on/off circuit , 300 watts continuous into 8 ohms or 500 watts continuous into 4 ohms , Line and speaker level inputs , Rack ears included.