Marantz MM7025 2 Channel Power Amplifier B-Stock

Sale!
Save $470.99

$ 1099.99 $629.00 (Sale ends on Aug 14, 2018)

Marantz MM7025 2 Channel Power Amplifier -Bstock

This Marantz MM7025 2 Channel Power Amplifier -Bstock is a “B-STOCK” item
Click Here For Gibby’s “B-Stock” Definition

  • 2-channel power amplifier
  • 140 watts x 2 into 8 ohms (20-20 kHz at 0.08% THD); 170 watts x 2 into 6 ohms
  • Discrete Current Feedback circuit for accurate, natural sound at all volume levels
  • Frequency response: 8-100,000 Hz (±3 dB)
  • Signal-to-noise ratio: 105 dB
  • One RCA and one XLR input for each channel
  • Oversized power transformer for high current levels
  • DC trigger input/output
  • IR flasher input
  • Gold-plated binding post speaker terminals

Only 1 left in stock

SKU: MM7025 B-Stock Category:

Frequently Bought Together

++Marantz CD5005
Price for all three:   $1,657.00

Product Description

Marantz MM7025 2 Channel Power Amplifier -Bstock

This Marantz MM7025 2 Channel Power Amplifier -Bstock is a “B-STOCK” item
Click Here For Gibby’s “B-Stock” Definition

The Marantz MM7025 two-channel power amplifier will enhance your audio experience. Pair it with the loudspeakers in your home theatre system to enjoy clear and pure sound reproduction, or use it for dedicated two-channel listening. With a sleek aluminum/glass resin front panel and space-saving design, this amplifier will fit nicely into any space.

Lots power for a wide range of audio applications

Connect the Marantz MM7025 2 x 140-watt power amp to the preamp outputs of a receiver or a wireless music player.. Add a pair of speakers that can handle the high power, and get ready for a breathtaking sonic thrill ride.

The Marantz MM7025 can be used in your main listening room to drive your primary speakers. Listen for  tighter, weightier bass, and wider dynamic swings that bring you closer to the sound of live music. (If your speakers can be biamped, the Marantz MM7025 makes a superb choice for driving the low-frequency half of your system.)

If you’re an Audiophile using a preamp or A/V processor with XLR outputs you can connect to this amp’s XLR inputs and take advantage of the superior sound quality they provide. You could also use this amp to power a second zone. If you’re using a speaker selector to divide the second-zone power among multiple rooms, don’t worry. There’s plenty of juice here to go around.

The Marantz MM7025’s current-feedback amplifier design provides for nuanced reproduction of fine musical detail and plenty of sonic muscle to support chest-thumping transient peaks. HDAM-SA3 circuits provide high-speed signal response for precise sound.

Additional Information

Weight11 kg
General

Number of Channels – 2
Power Output per Channel (8 ohms) – 140
Power Output per Channel (6 ohms) – 170
Power Output per Channel (4 ohms) –
Frequency Response – 8-100k
THD – 0.08%
Bridged Power per Channel – N/A
Speaker Outputs – 2
THX Certification – No
Width (inches) – 17-3/8
Height (inches) – 5-1/16
Depth (inches) – 15
Weight – 23.8 pounds
Parts Warranty – 3 Years
Labor Warranty – 3 Years

Inputs & Outputs

Number of Inputs – 2
Level Controls – No
Speaker Connectors – Posts

Specifications

Amplifier Type – Class AB
Power – (20 Hz-20 kHz, 0.08% THD, both channels driven)
8 Ω: 140 watts x 2
6 Ω: 170 watts x 2

Input Sensitivity:
RCA: 1.2 V/22 kΩ
XLR: 2.4 V/30 kΩ

Signal to Noise Ratio – 105 dB
Power Consumption – 330 watts
Standby Power – 0.2 watts
Weight – 23.8 pounds

Other Features

Current Feedback:
The MM7025 is equipped with a current feedback circuit and uses the same complimentary push-pull circuit as the far more expensive SM-11S1 power amp, providing minimal phase shift and excellent detail resolution. The current/voltage conversion section has a Wilson current mirror circuit to improve circuit stability and high-speed processing.

Instant Power Supply:
The final stage of the power amp uses the same LAPT (high efficiency power transistor) as the SM-11S1, offering instant power supply capability. The power section has a large transformer and Marantz original 15,000 μF / 71 V x 2 block condensers to provide a powerful, presence filled sound.

Heat Dissipation:
The chimney-shaped heat sink efficiently processes the heat emitted from each side of the amp and a quiet cooling fan removes the heat from the chassis. A high-sensitivity temperature sensor IC is used to control the cooling fan’s rotation speed to match the amount of heat generated by the amp.

Auto Standby:
With the Auto Standby Mode is turned on this unit will enter standby mode after approximately 30 minutes (continuous) with no input signal.

Speaker Outputs:
The speaker output terminals are binding posts; they are not 5-way posts, but will accept single banana plugs, pin connectors, and bare wire. A plastic collar prevents their use with spade lugs and they’re too far apart for dual banana plugs.

Inputs:
There are RCA (unbalanced) and XLR (balanced) inputs. Separate switches for the left and right channels specify which is engaged; useful if you’re not using the MM7025 as a stereo amp.

Display:
A blue indicator on the front panel display and a blue ring around the display light when the power is on; the blue ring around the display can be turned off if you prefer. Separate red indicators on the display light when the protection circuit or Auto Standby feature is engaged.

Remote Power Control:
This unit is equipped with a remote power control function; when a compatible Marantz preamp is connected, this unit’s power can be switched on and off simultaneously with the preamp. The RCA Remote Control input is connected to the preamp and the Remote Control output can be connected to other compatible Marantz components; CD player, DVD player, Tuner, etc.

Flasher Input:
The IR flasher input is useful with universal remote controls; power and mute remote codes are available for the MM7025.

DC Control:
The 3.5mm mini-jack input allows the MM7025’s power to be controlled by another device (5-15 V). The DC Control output allows the MM7025 to control the power of another compatible device (12 V/44 mA).

Watts Per Channel

51 to 150w

Channels

2

Estimated Shipping

When you add an item to your cart the Estimated Shipping* cost will be shown.  This estimated shipping* cost is accurate to most major city locations across Canada.  If the shipping cost is higher than the estimated shipping* then GibbysESM will contact you for approval before we process your order.

To learn more click Shipping Terms & Conditions

Marantz Canada 1 Year Limited “B-Stock” Warranty

Reviews

There are no reviews yet.

Be the first to review “Marantz MM7025 2 Channel Power Amplifier B-Stock”