Onkyo TX-8020 Stereo Receiver – B-Stock w/ Polk Audio MC85 8 1/2″ Rectangular In-Wall Speakers – Pair – Bundle
This Onkyo TX-8020 Bundle Includes:
(1) Onkyo TX-8020 Stereo Receiver – B-Stock
(2) Polk Audio MC85 8 1/2″ Rectangular In-Wall Speakers – Pair
Onkyo TX-8020 Stereo Receiver – B-Stock
This Onkyo TX-8020 Stereo Receiver is a “B-Stock” item Click Here For Gibbys “B-Stock” Definition
If you’re looking to get the best possible two-channel audio performance on a limited budget—and something versatile enough to power audio from your TV, Blu-ray player, personal computer, and CD player via digital or analog inputs—then the Onkyo TX-8020 Stereo Receiver is for you. Onkyo’s WRAT serves up more than enough pure analog power to drive most compact bookshelf and floorstanding speakers, with discrete output stage circuitry and a high current, low-impedance drive effortlessly handling the most demanding loads. The sound quality is characteristic of the veteran hi-fi brand, with lively dynamics, a sweet and natural mid-range, and accurate timing for all kinds of music. And just like the cool vintage receivers in its genealogy, the Onkyo TX-8020 has bass, treble, and balance controls as well as speaker A/B posts for multi-room setups.
WRAT (Wide Range Amplifier Technology)
The Onkyo TX-8020 Stereo Receiver features WRAT technology that uses low-negative-feedback circuit topology for accurate signal reproduction, improved dynamic signal-to-noise ratio, and better delivery of power peaks. The Onkyo TX-8020’s discrete stereo amplifier is rated at 50W x 2ch (8Ω, 20-20kHz, 0.08% THD).
The Onkyo TX-8020 offers independent Bass (+/-10dB @ 50Hz) & Treble (+/-10 @ 20kHz) control to fine-tune your music. You can also balance your music from left to right.
Analog Audio Inputs/Output
The TX-80520 is equipped with six analog audio inputs and one analog audio input. This receiver contains no digital inputs/outputs.
Included in the six analog audio inputs, is a Phono (MM) input with ground terminal.
A & B Speaker Terminals
The Onkyo TX-8020 stereo receiver is equipped with A & B speaker terminals to connect up to two pair of speakers. The receiver uses binding post connectors for the A & B speaker outputs. The binding posts are not 5-way because a plastic collar prevents their use with spade lugs; they will accept bare wire, pin connectors, and single banana plugs (spaced too far apart for dual bananas).
Note: If you’re using only one of the speaker sets (A or B), choose the 4Ω setting if each speaker’s impedance is 4Ω to less than 6Ω, or choose the 6Ω setting if each speaker’s impedance is 6Ω or more. If you’re using both of the speaker sets (A & B), choose the 4Ω setting if each speaker’s impedance is 8 to 16Ω.
The Onkyo TX-8020 stereo receiver is equipped with a mono subwoofer preamp output to connect a powered subwoofer.
When headphones are plugged into the full-size 1/4″ jack on the front-panel, the A & B main speakers are automatically muted.
The Onkyo TX-8020 stereo receiver features a built-in AM/FM tuner with manual, seek, and preset tuning. You can store your favorite stations as presets for quick selection. You can store a combination of up to 40 of your favorite FM/AM radio stations as presets. You can then label each preset with a 10 character name. The Onkyo TX-8020 also lets you directly tune in AM/FM stations using its remote control.
IR Remote w/ RI Remote Control Jack
The included IR remote control operates this unit & compatible Onkyo cassette players and CD players. The 1/8″ RI remote control jack allows you to connect this receiver to compatible Onkyo components.
The display brightness has three settings; Dim, Dimmer, and Normal.
From the remote, you can set the unit to automatically turn off after as much as 90 minutes or as little as 10 minutes; choices are presented in 10 minute increments.
The stereo receiver will automatically go into Standby mode, if there is no operation for 30 minutes with no audio/video signal input.
Polk Audio MC85 8 1/2″ Rectangular In-Wall Speakers – Pair
Polk Audio MC85 is Priced and Sold as a Pair
The Polk Audio MC85 High Performance 8 1/2″ Rectangular In-Wall Speakers are large, basic built-in loudspeaker that performs with no-holds-barred, even in difficult installation locations. the MC85 In-Wall features an 8-inch midwoofer for smooth, wide-range response with low distortion, and a 3/4-inch aimable silk dome tweeter with a powerful neodymium magnet structure for clear, detailed highs and excellent imaging (even in off-axis listening positions). Expect seamless integration with other Polk loudspeakers, and uniform sound coverage throughout even large rooms. Ideal For Multi-Room Audio.
The MC Series features features Dynamic Balance driver technology, an amiable tweeter and polymer cone woofers so your music sounds always crisp, always clear. Plus infinite baffle tuning for excellent bass response whatever kind of wall you put them in. Like all Polk Audio’s built-ins, the MC Series installs easily in new construction or retrofits. Moisture resistant mounting hardware and aluminum grilles let you install MC loudspeakers in the kitchen, bathroom and under outdoor eaves.
Fill your room with great sound, without sacrificing an inch of floor space. Polk’s MC85 speakers, sold separately, install flush in your wall for a sleek, attractive look. Pivot the 3/4″ tweeter to aim the high-frequencies where you like, so you can fine-tune your system’s sound. The 8″ woofer provides rich, warm lows. And this speaker’s moisture-resistant design means you can use it in your kitchen, bathroom, or even outdoors, under the eaves.
Handles up to 100 watts maximum input power
For robust and controlled audio that is crisp and clear.
8″ polymer composite woofer
Along with a 3/4″ silk dome tweeter for a complete range of sounds.
Dynamic Balance composite material technology
Ensures reduced offending resonance for clean and clear sound.
For detailed highs and sound imaging.
Wide dispersion design
Provides uniform sound coverage throughout a room.
Infinite baffle tuning
Utilizes in-wall space to increase low-end bass.
Paintable flange and grille
Allow you to match your décor.
Rotating cam mounting system
For a simple installation. A moisture-resistant design allows placement in damp locations.
30Hz – 20kHz frequency response
For faithful sound reproduction.
8 ohms nominal impedance
Conducts power through the speaker.