Onkyo TX-8020 Stereo Receiver – B-Stock | Polk Audio OS70 Outdoor Speakers White – Pair
This Onkyo TX-8020 Receiver Bundle Includes:
(1) Onkyo TX-8020 Stereo Receiver – B-Stock
(2) Polk Audio OS70 All-Weather Outdoor Speakers White – Pair
Onkyo TX-8020 Stereo Receiver – B-Stock
This Onkyo TX-8020 Stereo Receiver is a “B-Stock” item Click Here For Gibbys “B-Stock” Definition
If you’re looking to get the best possible two-channel audio performance on a limited budget—and something versatile enough to power audio from your TV, Blu-ray player, personal computer, and CD player via digital or analog inputs—then the Onkyo TX-8020 Stereo Receiver is for you. Onkyo’s WRAT serves up more than enough pure analog power to drive most compact bookshelf and floorstanding speakers, with discrete output stage circuitry and a high current, low-impedance drive effortlessly handling the most demanding loads. The sound quality is characteristic of the veteran hi-fi brand, with lively dynamics, a sweet and natural mid-range, and accurate timing for all kinds of music. And just like the cool vintage receivers in its genealogy, the Onkyo TX-8020 has bass, treble, and balance controls as well as speaker A/B posts for multi-room setups.
WRAT (Wide Range Amplifier Technology)
The Onkyo TX-8020 Stereo Receiver features WRAT technology that uses low-negative-feedback circuit topology for accurate signal reproduction, improved dynamic signal-to-noise ratio, and better delivery of power peaks. The Onkyo TX-8020’s discrete stereo amplifier is rated at 50W x 2ch (8Ω, 20-20kHz, 0.08% THD).
The Onkyo TX-8020 offers independent Bass (+/-10dB @ 50Hz) & Treble (+/-10 @ 20kHz) control to fine-tune your music. You can also balance your music from left to right.
Analog Audio Inputs/Output
The TX-80520 is equipped with six analog audio inputs and one analog audio input. This receiver contains no digital inputs/outputs.
Included in the six analog audio inputs, is a Phono (MM) input with ground terminal.
A & B Speaker Terminals
The Onkyo TX-8020 stereo receiver is equipped with A & B speaker terminals to connect up to two pair of speakers. The receiver uses binding post connectors for the A & B speaker outputs. The binding posts are not 5-way because a plastic collar prevents their use with spade lugs; they will accept bare wire, pin connectors, and single banana plugs (spaced too far apart for dual bananas).
Note: If you’re using only one of the speaker sets (A or B), choose the 4Ω setting if each speaker’s impedance is 4Ω to less than 6Ω, or choose the 6Ω setting if each speaker’s impedance is 6Ω or more. If you’re using both of the speaker sets (A & B), choose the 4Ω setting if each speaker’s impedance is 8 to 16Ω.
The Onkyo TX-8020 stereo receiver is equipped with a mono subwoofer preamp output to connect a powered subwoofer.
When headphones are plugged into the full-size 1/4″ jack on the front-panel, the A & B main speakers are automatically muted.
The Onkyo TX-8020 stereo receiver features a built-in AM/FM tuner with manual, seek, and preset tuning. You can store your favorite stations as presets for quick selection. You can store a combination of up to 40 of your favorite FM/AM radio stations as presets. You can then label each preset with a 10 character name. The Onkyo TX-8020 also lets you directly tune in AM/FM stations using its remote control.
IR Remote w/ RI Remote Control Jack
The included IR remote control operates this unit & compatible Onkyo cassette players and CD players. The 1/8″ RI remote control jack allows you to connect this receiver to compatible Onkyo components.
The display brightness has three settings; Dim, Dimmer, and Normal.
From the remote, you can set the unit to automatically turn off after as much as 90 minutes or as little as 10 minutes; choices are presented in 10 minute increments.
The stereo receiver will automatically go into Standby mode, if there is no operation for 30 minutes with no audio/video signal input.
Polk Audio OS70 All-Weather Outdoor Speakers White – Pair
Polk Audio OS70 is Priced And Sold As A Pair.
Around a barbeque, by the pool or out on the deck, the Polk Audio OS70 brings big, full sound to all your outdoor spaces. Polk Audio is well-known for creating outdoor loudspeakers that reproduce high-fidelity sound and that are also built to live and play outdoors year round. Polk Audio’s OS70 offer exceptional performance and value making it possbile for more music lovers to bring their entertainment outdoors. Pair of weather resistant for outdoor use speakers. Durable, non-rusting aluminum grille is paintable to match any outdoor decor. Rustproof aluminum bracket allows multiple mounting options and full 90 degree rotation: aim them to deliver the best possible sound in a variety of locations. Woofer: 6-1/2″ polymer composite cone with durable rubber surround for solid bass and smooth midrange. Tweeter: 1″ silk dome tweeter for clear detailed highs Max Power: 150 Watts