Onkyo TX-8020 Stereo Receiver | Audio-Technica AT-LP60-USB Blk Turntable – B Stock | Paradigm Monitor Atom v7 Spkrs Blk – Pair
This Onkyo TX-8020 Receiver Bundle Includes:
(1) Onkyo TX-8020 Stereo Receiver – B-Stock
(1) Audio-Technica AT-LP60-USB Black Belt-Drive Stereo Turntable – B Stock
(2) Paradigm Monitor Atom Series 7 Bookshelf Speakers Black Ash
Onkyo TX-8020 Stereo Receiver – B-Stock
This Onkyo TX-8020 Stereo Receiver is a “B-Stock” item Click Here For Gibbys “B-Stock” Definition
If you’re looking to get the best possible two-channel audio performance on a limited budget—and something versatile enough to power audio from your TV, Blu-ray player, personal computer, and CD player via digital or analog inputs—then the Onkyo TX-8020 Stereo Receiver is for you. Onkyo’s WRAT serves up more than enough pure analog power to drive most compact bookshelf and floorstanding speakers, with discrete output stage circuitry and a high current, low-impedance drive effortlessly handling the most demanding loads. The sound quality is characteristic of the veteran hi-fi brand, with lively dynamics, a sweet and natural mid-range, and accurate timing for all kinds of music. And just like the cool vintage receivers in its genealogy, the Onkyo TX-8020 has bass, treble, and balance controls as well as speaker A/B posts for multi-room setups.
WRAT (Wide Range Amplifier Technology)
The Onkyo TX-8020 Stereo Receiver features WRAT technology that uses low-negative-feedback circuit topology for accurate signal reproduction, improved dynamic signal-to-noise ratio, and better delivery of power peaks. The Onkyo TX-8020’s discrete stereo amplifier is rated at 50W x 2ch (8Ω, 20-20kHz, 0.08% THD).
The Onkyo TX-8020 offers independent Bass (+/-10dB @ 50Hz) & Treble (+/-10 @ 20kHz) control to fine-tune your music. You can also balance your music from left to right.
Analog Audio Inputs/Output
The TX-80520 is equipped with six analog audio inputs and one analog audio input. This receiver contains no digital inputs/outputs.
Included in the six analog audio inputs, is a Phono (MM) input with ground terminal.
A & B Speaker Terminals
The Onkyo TX-8020 stereo receiver is equipped with A & B speaker terminals to connect up to two pair of speakers. The receiver uses binding post connectors for the A & B speaker outputs. The binding posts are not 5-way because a plastic collar prevents their use with spade lugs; they will accept bare wire, pin connectors, and single banana plugs (spaced too far apart for dual bananas).
Note: If you’re using only one of the speaker sets (A or B), choose the 4Ω setting if each speaker’s impedance is 4Ω to less than 6Ω, or choose the 6Ω setting if each speaker’s impedance is 6Ω or more. If you’re using both of the speaker sets (A & B), choose the 4Ω setting if each speaker’s impedance is 8 to 16Ω.
The Onkyo TX-8020 stereo receiver is equipped with a mono subwoofer preamp output to connect a powered subwoofer.
When headphones are plugged into the full-size 1/4″ jack on the front-panel, the A & B main speakers are automatically muted.
The Onkyo TX-8020 stereo receiver features a built-in AM/FM tuner with manual, seek, and preset tuning. You can store your favorite stations as presets for quick selection. You can store a combination of up to 40 of your favorite FM/AM radio stations as presets. You can then label each preset with a 10 character name. The Onkyo TX-8020 also lets you directly tune in AM/FM stations using its remote control.
IR Remote w/ RI Remote Control Jack
The included IR remote control operates this unit & compatible Onkyo cassette players and CD players. The 1/8″ RI remote control jack allows you to connect this receiver to compatible Onkyo components.
The display brightness has three settings; Dim, Dimmer, and Normal.
From the remote, you can set the unit to automatically turn off after as much as 90 minutes or as little as 10 minutes; choices are presented in 10 minute increments.
The stereo receiver will automatically go into Standby mode, if there is no operation for 30 minutes with no audio/video signal input.
Audio-Technica AT-LP60-USB Black Belt-Drive Stereo Turntable – B Stock
This Audio-Technica AT-LP60-USB is a “B-Stock” item Click Here For Gibbys “B-Stock” Definition
The Audio-Technica AT-LP60-USB Black Belt-Drive Stereo Turntable will have you getting your classic albums off the shelf and into your MP3 player. Now you can experience your vinyl’s high-fidelity audio directly or convert it to digital. The AT-LP60-USB stereo turntable comes equipped with a USB output that allows direct connection to your computer. This Audio-Technica AT-LP60-USB Black Belt-Drive Stereo Turntable features a built-in switchable phono preamp that enables it to be connected directly to a computer, home stereo, powered speakers and other components that have no dedicated turntable input.
Audio-Technica brings its legendary quality and audio fidelity to the digital realm with the Audio-Technica AT-LP60-USB Black Belt-Drive Stereo Turntable. A USB output means there are no special drivers required for a direct connection to your computer, Built-in switchable stereo phono/line level pre-amplifier allows you to use the turntable with your stereo system via magnetic-phono or AUX inputs; also allows convenient use of the turntable with most powered speakers, Professional aluminum turntable platter. Integral Audio-Technica Dual Magnet phono cartridge with replaceable diamond stylus, Damped lift/cueing mechanism with front-panel control, and a removable dust cover.
Paradigm Atom Monitor Series 7 Bookshelf Speakers Black Ash – Pair
Paradigm Atom Monitor Series 7 Bookshelf Speakers is Priced and Sold as a Pair.
The Building Blocks: Monitor Drivers
Advanced S-Pal Satin-Anodized Pure-Aluminum Bass/Midrange Cones. First seen in our Paradigm Reference lineup, very high stiffness-to-mass ratio and outstanding internal damping. The result? Remarkable midrange clarity, superb extended bass response and freedom from unwanted resonances and distortions. In an affordable audio category – unbelieveable quality!
Advanced S-PAL Satin-Anodized Pure-Aluminum Domes
Powerful neodymium magnets and ferro-fluid cooling for increased power handling! Highs are more soaring and spacious, crystal clear and undiluted even at the higher bandwidths.
Wire Mesh Tweeter Guard and WaveGuide
More Reference technology, ensuring a smooth, wide panorama of audiophile-quality sound. Wire mesh protection for the pure-aluminum tweeter.
In an affordable audiophile product! Again, it’s almost unheard of: polypropylene film or bipolar electrolytic capacitors, air core and laminated core inductors, high-power resistors. Crossover topologies are first and second-order with corresponding acoustic slopes of second and third-order providing optimal bandwidth and seamless integration as drivers cross over.
Long-Travel Motor/Magnet Structures
Despite fewer drivers than in previous series’, floorstanding and center channel speakers actually plumb deeper. This is, in part, attributable to the advanced motor/magnet structures: high-temperature copper or aluminum wire voice coils (varies by model) wound on Kapton formers, oversized magnets with all components FEA-optimized.
Foam-Rubber Elastomer Surrounds
Reference Studio Series geometry! Help achieve that play loud AND play deep effect by allowing longer, expertly controlled cone travel.