Onkyo TX-SR494 7.2 Channel Built-In Bluetooth AV Receiver | Polk Audio TSi300 5.0 Home Theater Bundle #1

Onkyo TX-SR494 7.2 Channel Built-In Bluetooth AV Receiver | Polk Audio TSi300 5.0 Home Theater Bundle #1

This Bundle Includes:
(1) Onkyo TX-SR494 7.2-Channel Built-In Bluetooth AV Receiver
(1) Polk Audio TSi300 3-Way Floor-Standing Speakers – Pair – Black
(3) Polk Audio CSR Centre Channel Speaker

Onkyo TX-SR494 7.2-Channel Built-In Bluetooth AV Receiver

Onkyo TX-SR494 is equipped with four HDMI inputs and one HDMI output. The HDMI output supports ARC for the reproduction of display-based audio, such as your TV’s built-in streaming apps. Its rear-panel easy connection guide will help you connect your receiver quickly and easily.

AccuEQ Room Acoustic Calibration With Accureflex

AccuEQ sets speaker parameters, such as size and distance, and sets their sound-pressure levels. It then selects the right subwoofer crossover setting and applies equalization to all your speakers. AccuReflex is designed to optimize object-based audio reproduction through Dolby Atmos-enabled speakers, resolving phase-shift caused by the path differences between directional and non-directional sounds. These features combine to help improve localization and provide a 3D soundstage with vertical movement and overhead dimensionality.

Clear Dialogue With The Touch Of A Button

Onkyo TX-SR494 features DSP-controlled Vocal Enhancer that identifies vocal frequencies and allows you to raise or lower them to your taste using the keys on the remote or via the tone controls on the receiver’s front panel.

Zone B Line-out

The Zone B line-out lets you connect a component with an analog RCA line input to audio sources connected to the receiver, including digital audio via HDMI, optical, or digital coaxial. Share sound to a nearby space, or connect a supported transmitter for your wireless headphones to enjoy your media without disturbing those around you.

Powered Zone B Audio Or Front-channel Bi-amping

The Height/Surround Back outputs can alternatively be used as a Bi-Amp/Zone B speaker output to drive stereo speakers in another room with a 5.2-channel setup in the main room. They can share a source exclusively in Zone B, or play the same source in both zones. You can also bi-amp your compatible front speaker pair.

Rear-panel Setup Guide Helps Simplify Connection

Connections to speakers and external devices are illustrated and labeled on the back panel. Images help you read the diagram upside-down if you’re leaning over the top of the receiver.

Bluetooth Audio Streaming

Onkyo TX-SR494 Bluetooth wireless technology sends whatever is playing on your compatible mobile device, laptop, or computer to your home theater. Once the receiver has paired with and remembered your device, it can start playback automatically whenever it detects an incoming Bluetooth audio stream from that device.

Advanced Music Optimizer

Lossy files, such as MP3s, are convenient, but data lost in the compression process results in comparatively low fidelity. Advanced Music Optimizer technology helps restore lost information for enhanced sound quality with these file types. This mode also optimizes Bluetooth streaming playback quality.

Connect And Power Your Media Streaming Device

A rear-panel USB power output supplies power to select HDMI media streaming devices, allowing you to upgrade your home theater with on-demand network entertainment without additional power cords.

Dolby Atmos Height Virtualizer, Available Via Future Firmware Update

When playing any Dolby format, engaging the Dolby Atmos Height Virtualizer helps provide a more immersive listening experience by creating a virtual surround and height effect from traditional speaker layouts. This feature is scheduled to be made available via a future firmware update.

Polk Audio TSi300 3-Way Floor-Standing Speakers – Pair – Black

The Polk Audio TSi300 smooth, clear sound will appeal to both music and movie fans. Silk is used in its tweeter, which produces scintillating highs, and two polycarbonate woofers, which produce precise mids and lows. In order to bring out the nuances in your music and movies, the braced MDF cabinet fights resonance. A unique feature for a speaker in this price range, dual five-way binding posts allow you to bi-amp or bi-wire the TSi300 for even better performance.

The Polk Audio TSi300 has a sophisticated appearance thanks to a woodgrain vinyl surface, which is topped by a classy piano black top plate. Whether your floor is carpeted or not, the speaker is attached to it with the help of strong stabilizer feet at the base. You may enjoy powerful tower speaker sound without giving up much space, as the speaker’s footprint is less than one square foot.

Driver Innovation

Dynamic Balance, a system exclusive to Polk Audio, uses laser imaging to ascertain which combination of speaker materials produces the least resonance. Low distortion and a wide, smooth response are the results of eliminating resonance in speakers.

Polk experts were able to adjust the speaker construction and cabinet design for the greatest performance, even at high listening levels, using a cutting-edge Klippel Distortion Analyzer.

Even when driven by modestly-powered amplifiers and receivers, these speakers deliver music that is open, airy, and clear. They are compatible with nearly any AV receiver.

The speaker has two 5.25 inch “dynamic balancing bi-laminate composite drivers that are light and strong for a deep bass response with minimal distortion Each woofer uses a butyl rubber casing for optimum performance longevity.

The speaker has a 1 ohm driver “For precise highs, use a silk dome dynamic balancing tweeter. To increase detail and transparency and to lengthen the high frequency response, the tweeter has Mylar bypass capacitors in the crossovers.

The frequency response ranges from 35Hz to 25kHz overall, and from 47Hz to 24kHz at -3dB.

Enclosure Design

The Polk Audio TSi300 speaker cabinets are made of MDF that has been carefully reinforced and with 34″ thick baffles. TSi speakers look fantastic and are less than one square foot in size. They have pewter accents, a piano black top plate, and a detachable black grille. All versions come with a choice of vinyl finishes: cherry wood-grain or black.

Narrow Baffle Geometry: A speaker with excellent sound and a streamlined appearance can be made using narrow baffle geometry. The premium cabinet is slim and fits neatly in your space. The speaker parts with lower diameters have less mass, which results in crisper sound.

All TSi speakers have flared ports that have been meticulously calibrated. Flared ports allow good low frequency extension with less distortion and reduce port noise (or “chuffing”). TSi speakers produce genuine, natural, full-bodied sound with deep bass when the ports are flared. There is a down-firing power port on these floor-standing TSi speakers.

Polk Audio CSR Centre Channel Speaker

Polk Audio CSR centre channel speaker was created to deliver excellent sound at an affordable cost. With driver innovations from Polk’s higher-end speaker lines, the CSR reproduces fine dialogue and sound effects from motion pictures. For seamless home theatre surround sound, pair it with the R150 bookshelf speakers or the R300 tower speakers.

Smooth, accurate response is provided by Polk’s proprietary Dynamic Balance® drivers for natural and detailed sound. The speaker is prepared for even the most dramatic movie soundtracks thanks to rubber surrounds that boost the speaker’s longevity and power handling. The Polk Audio CSR has a sturdy MDF cabinet that resists vibrations that could muddy the sound, and it has a sleek black appearance that complements many TVs and entertainment centres. A unusual feature for a speaker in this price range, the speaker’s five-way binding posts on the back allow for a safe connection to your receiver or amp.

Dynamic Balance: Dynamic Balance is a proprietary Polk Audio technology using laser imaging to determine what combination of speaker materials create the least amount of resonance. Eliminating resonance in speakers results in a wide, smooth response and low distortion.

Polymer Composite Woofers: The speaker features two lightweight, yet stiff mineral-filled polymer composite woofers with good damping, giving you high efficiency, excellent bass, and low distortion. For high performance durability, each woofer uses a butyl rubber surround and an acoustically inert stamped driver basket.

Silk/Polymer Tweeter: The speaker has a 0.75″ fabric/polymer dome tweeter with a neodymium magnet that provides clear, detailed highs.

Mylar Capacitors: The speaker utilizes Mylar bypass capacitors to extend its high frequency response and improve detail and transparency.

Acoustically Inert Cabinet: The speaker cabinet features all-MDF construction with internal bracings that virtually eliminate sound-muddying resonance.

Port: There is a single critically-tuned port opening on the rear of the speaker that has low port noise for increased and extended bass response.

Grille: The speaker features a removable anti-diffraction cloth grille that minimizes grille diffraction for spacious, three-dimensional imaging.

5-Way Binding Posts: The 5-way binding posts will accept bare wire, pin connectors, spade connectors, banana plugs, and dual banana plugs.

Magnetically Shielded: The speaker is magnetically shielded, allowing you to place it on your television without distorting the picture.

Timbre-Matched: The Polk CSR is designed to be used as a center-channel in any Polk Audio home theater or multi-channel music system for a more realistic seamless surround sound environment.

Mounting: The center-speaker comes with 4 rubber self-adhesive feet to help secure the speaker in place to prevent slippage and vibration. The center-speaker does not come with any type of wall-bracket or key-hole slot for wall-mounting the speakers.