Rockford Fosgate P1-1X12-BUNDLE 12″ Loaded Subwoofer Enclosure | PBR300X2 300 W 2-Channel Amplifier | RFK8I Installation Kit

Brand: Rockford Fosgate
Model Number: P1-1X12-BUNDLE
UPC:
Model Number: P1-1X12-BUNDLE
UPC:
Free Shipping

Save $180.00

$949.97

$1,129.97

|

OR

|

Payments as low as

$79.16/mo

PayBright

Availability: In stock

Product Description

Features & Specifications

Documents

Warranty

Rockford Fosgate P1-1X12-BUNDLE 12″ Loaded Subwoofer Enclosure | PBR300X2 300 W 2-Channel Amplifier | RFK8I Installation Kit

This Bundle Includes:

(1) Rockford Fosgate P1-1X12 Punch Single P1 12″ Loaded Subwoofer Enclosure
(1) Rockford Fosgate PBR300X2 Punch 300 Watt 2-Channel Amplifier
(1) Rockford Fosgate RFK8I 8 AWG Power & Signal Amplifier Installation Kit


Rockford Fosgate P1-1X12 Punch Single P1 12″ Loaded Enclosure Subwoofer

The Rockford Fosgate P1-1X12 is a single P1 12” vented enclosure with 250 Watts RMS power handling wired to a 4-Ohm load. The enclosure is constructed with 5/8” MDF, covered in high density carpet, and features quick release compression terminals. The most convenient way to get low frequency bass in your system is to drop-in a Punch Loaded enclosure. We’re not talking junk in the trunk, we’re talking the same genuine Punch woofers available separately. Rockford Fosgate P1-1X12 Punch Loaded enclosures are constructed with durable 5/8″ MDF and tuned by our computer aided design software. P1 Loaded Enclosures feature similar tonal performance as P2/P3 models, but are easier to move in-n-out of vehicles due to their lighter weight.

The Rockford Fosgate P1-1X12 ported enclosure fills your ride with juicy, high-volume bass, so you and your passengers can rock out to the latest beats. The enclosure’s Punch P1 12″ woofer features a paper cone reinforced with Kevlar fibers, supported by a rubber surround. The heavy-duty motor assembly and advanced cooling vents allow this sub to handle up to 250 watts RMS without flinching.

Rugged 5/8″ medium-density fiberboard construction means this enclosure will hold strong for fat, heavy bass. Industrial-grade black carpet provides a clean, finished look, and protects your trunk from nicks and scratches. This enclosure uses an advanced port design that promotes generous air movement, while reducing distortion-causing port noise, so you hear louder, deeper bass. Add an amp and some wiring, and feel the thick low end this enclosure adds to your ride.


Rockford Fosgate PBR300X2 300 Watt 2-Channel Punch Amplifier

The Rockford Fosgate PBR300X2 is a 300 Watt amplifier with Boosted Rail Technology, allowing it to be compact and efficient while providing big power. This amp is great for smaller stealth installations, motorcycles and recreational vehicles.

The Punch PBR300X2 uses our patented BRT (Boosted Rail Technology) for an ultra efficient design that does not use a switching power supply to generate its rated power. This allows the chassis design to be much smaller than traditional sized amplifiers. The BRT also has a variable hi-level DC offset turn-on circuit for easy installation into any OEM system. It is great for smaller stealth installations, as well as for motorcycles and recreational vehicles.

Tiny giant

You won’t believe how small and powerful this amp is. The Rockford Fosgate PBR300X2 2-channel amp puts out 100 watts RMS each to a pair of speakers, all from an amp you can easily hold in one hand. You can also put this amp in one-channel mode to drive a sub with 300 watts RMS of bumping bass. And an optional wired remote control lets you add Rockford Fosgate’s famous extra Punch from the front seat.

PBR300X2 control panel

Boosted Rail (BR) amp technology

This Punch Class BR amplifier uses Boosted Rail (BR) amp technology to generate so much power from such a tiny case, with capacitors and high-speed circuitry that boost the amp’s power supply voltage when needed, so it can handle musical peaks without missing a beat. Rockford Fosgate uses this new technology to create a remarkable amp that fits almost anywhere and delivers powerful sound.

Heat management

The amp also features speaker-level inputs with signal-sensing turn-on, allowing you to connect into almost any system without having to run a turn-on lead back to the receiver. An extruded aluminum heat sink combines with Rockford Fosgate’s heat management technology to make sure your tunes keep rockin’ — even when you’re playing loud.


Rockford Fosgate RFK8I 8 AWG Power & Signal Amplifier Installation Kit

8 gauge power, ground and signal installation kit for an amplifier.

Kit includes 17 feet of 8 AWG power wire, 3 feet of 8 AWG ground wire, (1) 16 feet twisted pair RCA, AGU fuse holder and fuse, 20 feet of remote wire, 40 Amp fuse.

RFK8I Features:

  • FULL spec cable – meets or exceeds AWG (American Wire Gauge) requirements
  • 8 AWG (8.36mm²) 735 strands
  • Includes appropriate wire termination hardware
  • 100% Pure Crystal-Oxygen Free Copper (PC-OFC)

CEA-2015

Rockford Fosgate cables conform to the CEA-2015 industry standard. The standard specifies the exact amount of copper needed to indicate a specific wire diameter or gauge size (8 AWG, 4 AWG, etc). Some manufacturers substitute thicker insulation for copper. With Rockford Fosgate, you get exactly what you pay for.

Includes RCA Cables

This amplifier kit includes RCA patch cables. These are the necessary cables used to transfer low-level signal from the source unit to the amplifier, typically located in the rear of the vehicle.

Includes Fused Dist.

This amplifier kit includes fused distribution. It utilizes a stand-alone fuse holder that can be installed in a convenient place under the hood.

Includes Power Wire

This amplifier kit includes power wire by including necessary cable for both B(+) and GND(-) connections. Additionally, amplifier kits include remote turn-on power wire. All cables in this kit conform to the CEA-2015 AWG specification.

Brand Rockford Fosgate   Model Rockford Fosgate P1-1X12-BUNDLE
Product: Rockford Fosgate P1-1X12-BUNDLE 12″ Loaded Subwoofer Enclosure | PBR300X2 300 W 2-Channel Amplifier | RFK8I Installation Kit
P1-1X12 Subwoofer

Woofer Size (inches): 12
Speakers Per Box: 1
Woofer Material: Kevlar/Paper
Enclosure Type: Ported
Color: Black
Pieces in System: 1
Width (inches): 19-1/8
Height (inches): 15-1/4
Depth (inches): 16-5/8
Connector Type: Spring post
Frequency Response: 25-250 Hz
Power Range (Watts RMS): 250
Maximum Wattage: 500
Sensitivity: 86 dB
Impedance: 4 ohms

PBR300X2 Amplifier

Performance
– RMS Power Output (Watts x Channels): 100 x 2
– Power at 2 Ohms: 150 x 2
– Bridged Power : 300 x 1
– Minimum Impedance Bridged: 4
– Minimum Impedance Unbridged: 2
– Minimum Impedance: 2
– Frequency Response: 20Hz – 20kHz +/-3dB
– THD at Rated RMS Power: 1%
– Signal to Noise Ratio: 80 dB
– Input Voltage: 14.4v
– Input Sensitivity: 150 mV – 11 V
– Efficiency (average): 68% @ 4-Ohm
– Signal Input: High/Low Level Input: 4-Pin harness
– Hi-Level Sensitivity: Variable DC offset sensitivity
– Operating Voltage: 9 – 16 VDC

Features
– Amplifier Class: BR
– Cooling: Convection
– Low-Pass Crossover Frequency: 50-500 Hz
– Low-Pass Slope: 12 dB/oct
– High-Pass Crossover Frequency: 50-500 Hz
– High-Pass Slope: 12 dB/oct
– Bass Boost: Optional (0-18 dB)
– Bass Boost Frequency: 45 Hz
– Fuse Rating: 30
– Speaker Level Inputs: RCA
– Preamp Outputs: No
– Bridgeable: Yes
– Visual Indicators: Power/Protect, BRT (Boost)
– Speaker Wire Gauge: 16 AWG
– Speaker Output Connector: 4-Pin Harness
– Recommended Fuse: 50 A
– Average Current Draw (13.8V Music): 23 A
– Max. Current Draw (13.8V Sinewave): 45 A
– Suggested Alternator: 75 A

Power
– Power Wire Gauge: 10 AWG
– Power Input Connector: Detachable Compression Terminal
– Total Power: 300 Watts
– Rated Power: 100 Watts x 2 @ 4-Ohm
150 Watts x 2 @ 2-Ohm
300 Watts x 1 @ 4-Ohm Bridged
– Dynamic Power: 114 Watts x 2 @ 4-Ohm
160 Watts x 2 @ 2-Ohm
387 Watts x 1 @ 4-Ohm Bridged

Controls
– Tone Controls: Optional Remote Punch EQ
– Crossover Controls: High-Pass: 50Hz – 500Hz @ 12dB/Octave Butterworth
– Low-Pass: 50Hz – 500Hz @ 12dB/Octave Butterworth
– All-Pass: Yes
– Remote Controls: Optional PEQ provides 0dB to +18dB @ 45Hz

Dimensions (H x W x D)
– 1.53 x 4.25 x 6.75 (in.)
– 3.90 x 10.8 x 17.2 (cm)
– Shipping Weight: 2.8 Lbs. (1.27 Kg.)

RFK8I Installation Kit

Fuse Type: AGU
Battery PWR/GND Gauge: 8 AWG
Amplifier PWR/GND Gauge: 8 AWG
Fuse Size: 60 Amp
Dual Amp Installation Kit: No

Car Subwoofer Size

12"

RMS Power

201 to 400 Watts

Impedance

4 Ω

Enclosure - Car Compatibility

Not Car Specific

Mobile Amplifier Channels

2 Channel

Mobile Amplifier Class

Class BR

Mobile Amplifier Features

Bass Boost, High-Pass Filter, Low-Pass Filter, Speaker Level Inputs

Mobile Amplifier Fuse Rating

30

Mobile Amplifier RMS

101 to 150 watts

Mobile Min Impedance

2

UTV Amplifier

Yes

Estimated Shipping

When you add an item to your cart the Estimated Shipping* cost will be shown.  This estimated shipping* cost is accurate to most major city locations across Canada.  If the shipping cost is higher than the estimated shipping* then GibbysESM will contact you for approval before we process your order.

To learn more click Shipping Terms & Conditions

Rockford Fosgate Canada 1 Year Limited Warranty

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Save $180.00

$949.97

$1,129.97

|

OR

|

Payments as low as

$79.16/mo

PayBright

Availability: In stock

FAST & FREE SHIPPING
ON MOST ORDERS*
LOWEST PRICE
GUARANTEE
KNOWLEDGABLE
CUSTOMER SERVICE
30 DAY RETURN
POLICY
preloader