Hello
Add your address
Delivery Options
Choose your location

or enter a Canadian postcode
Apply
Speeds may vary for different addresses.
Saving ...

Rockford Fosgate P500X2 Punch 500 Watt 2-Channel Amplifier

Brand: Rockford Fosgate
Model Number: P500X2
UPC: 780687332426
Rockford Fosgate
Model Number: P500X2
UPC: 780687332426

Rockford Fosgate P500X2 Punch 500 Watt 2-Channel Amplifier

  • Class-AB amplifier design
  • Frequency response: 20-20,000 Hz
  • Dynamic Thermal Management and MEHSA MOSFET cooling systems
  • MOSFET power and output stages
  • Preamp inputs and outputs

Save $110.00

$569.99

$679.99

|

OR

|

Payments as low as

$47.50/mo

PayBright
30 DAY RETURN POLICY
LOW PRICE GUARANTEE

Product Description

Features & Specifications

Documents

Warranty

Rockford Fosgate P500X2 Punch 500 Watt 2-Channel Amplifier

The Rockford Fosgate P500X2 is an excellent way to PUNCH up your sound system without monopolizing your entire trunk – that way you have more room for subs! With its massive output stage, this amplifier is best suited for driving a pair of 8-ohm SVC subwoofers or four 2-ohm DVC subwoofers. Remember to utilize the recommended power and speaker cables to optimize power delivery. The Rockford Fosgate Punch P500X2 is a 2-channel stereo amplifier capable of producing 250 Watts into each channel at 2-Ohms. The P500X2 amplifier is great with full-range or component systems or can be bridged for use with several subwoofers.

Easy to set for optimum performance

Once again, Rockford Fosgate steps away from the crowd with their C.L.E.A.N. technology (Calibrated Level Eliminates Audible Noise) — a setup system that ensures your music will sound as clean and powerful as possible. It works like this: play the setup tone on the included test CD, adjust the receiver volume until a red clip light on the amp goes out, then turn the amp gain up until a blue light comes on. It’s that simple — your amplifier is now set to match your receiver’s output. When your receiver reaches maximum clean volume, you’ll get maximum clean power from your Punch amp. At quiet listening levels, you’ll hear less background noise and more of your music.

Keeps an eye on things while playing

If that blue light turns solid red while you’re playing music, the amp’s telling you that your source is distorting and you should turn it down, or risk damage to your gear. The optional PLC2 remote level control also doubles as a clip indicator, so you can see from the front seat if your music’s clipping. The amp’s built-in computer keeps tabs on the output current, ensuring that plunging speaker impedances (they change during play) or even a short circuit won’t hurt anything.

Big power for your speakers or sub

Rockford Fosgate’s Punch P500X2 amplifier sends 150 watts RMS per channel to your speakers, filling your ride with clean music. You can use the high-pass filter to keep the low bass out of your speakers so they perform more efficiently. You can also switch this versatile amp into mono mode to drive a subwoofer with up to 500 watts RMS, then use the built-in low-pass filter to send the correct bass frequencies to your sub. The Punch EQ2 features bass and treble boosts, in case you want to add a little boom and sizzle back into the mix.

Maintaining coolness raises efficiency and lowers distortion

Rockford Fosgate’s Dynamic Thermal Management system uses forced air to dissipate heat evenly across the amp and out through the high-mass heatsink, efficiently drawing heat away from vital internal parts. Their proprietary MEHSA cooling process maximizes the heat transfer from the MOSFET devices to the heatsink, allowing the heat to escape more readily, so the transistors stay cooler and work better.

Available Wiring Diagrams

Please consult your amplifier owner’s manual for lowest recommended impedance.

Wiring Diagram #1

Wiring Diagram #2

Wiring Diagram #3

Wiring Diagram #4

Wiring Diagram #5

Rockford Fosgate P500X2

Wiring Diagram #6

Wiring Diagram #7

Wiring Diagram #8

Rockford Fosgate P500X2

Wiring Diagram #9

Wiring Diagram #10

Rockford Fosgate P500X2
Brand Rockford Fosgate   Model Rockford Fosgate P500X2
Product: Rockford Fosgate P500X2 Punch 500 Watt 2-Channel Amplifier
Specifications

RMS Power Output (Watts x Channels): 150 x 2
Power at 2 Ohms (Watts x Channels): 250 x 2
Bridged Power (Watts x Channels): 500 x 1
Minimum Impedance Bridged: 4
Minimum Impedance Unbridged: 2
Minimum Impedance: 2
Best Frequency Response: 20-20k Hz
THD at Rated RMS Power: 1%
Signal to Noise Ratio: 85 dB
Input Voltage: 14.4v
Amplifier Class: AB
Low-Pass Crossover Frequency: 50-250 Hz
Low-Pass Slope (dB/octave): 12 dB/octave
High-Pass Crossover Frequency: 50-250 Hz
High-Pass Slope (dB/octave): 12 dB/octave
Bass Boost: 0-18 dB
Bass Boost Frequency: 45 Hz
Fan Cooled: No
Fuse Rating: 80
Speaker Level Inputs: Yes
Preamp Outputs: 2
Width (inches): 13-3/8
Height (inches): 2-7/16
Depth (inches): 8-13/16

What's in the box

Rockford Fosgate Punch P500X2 owner's manual
2-Channel amplifier
Four 1-3/8" Self-tapping screws
2.5mm Allen wrench
Quick setup instructions
Certificate of Performance

Mobile Amplifier Channels

2 Channel

Mobile Amplifier Class

Class AB

Mobile Amplifier Features

Bass Boost, High-Pass Filter, Low-Pass Filter, Pre Amp Outputs, Speaker Level Inputs

Mobile Amplifier Fuse Rating

80

Mobile Amplifier RMS

351 to 750 watts

Mobile Min Impedance

2

Estimated Shipping

When you add an item to your cart the Estimated Shipping* cost will be shown.  This estimated shipping* cost is accurate to most major city locations across Canada.  If the shipping cost is higher than the estimated shipping* then GibbysESM will contact you for approval before we process your order.

To learn more click Shipping Terms & Conditions

Rockford Fosgate Canada 1-Year Limited Warranty

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

preloader