Samsung WMNM15EB No Gap Wall Mount
Samsung’s “no-gap” mounting solution
The Samsung WMNM15EB No Gap Wall Mount is designed specifically to mount select 2019, 2018, and 2017 Samsung 65″ and 55″ QLED TVs. Compatible 2019 models include the Q90R and Q900R series
Samsung’s No Gap Wall Mount offers an easy way to position select 55″ and 65″ Samsung QLED TVs flush against the wall.
The minimal gap between wall and TV — 0 to 1/4″ depending on the TV model — is possible because the part that attaches to the TV fits a carved out area on the back of the set.
This no-gap design still allows you to tilt your Samsung QLED TV downward up to 10°. This means you can mount your TV high on the wall — like over a fireplace — and tilt it downward for a better viewing angle.
No Gap Design: The Samsung WMN-M15E mounts your compatible Samsung QLED TV to the wall with nearly no gap (between 0.079″ and 0.275″ based on model TV, wall type, and installation). The distance between the wall and the left or right side of the TV may be different depending on the wall and installation conditions. A larger gap between the back of the QLED TV and the wall may occur if the wall is not 100% flat or is constructed off angle to the floor (or if the wall-mount installation is done incorrectly).
Tilt Mechanism: The Samsung WMN-M15E No Gap Wall-Mount allows you to tilt your Samsung QLED series TV downward 10-degrees (maximum tilt will depend on size of TV). This allows you to mount your TV high on the wall (like over a fireplace) and tilt it downward for a better viewing angle.
Wood Stud & Concrete Installation: The Samsung WMN-M15E comes with the appropriate hardware to mount the bracket to wood studs or a concrete wall. The included wall bracket plate supports 16″ OC wood studs (24″ OC is not supported) using the supplied hardware. In addition, anchors are supplied for concrete wall installation.
Level Adjustment: Once your QLED TV is installed on the No Gap Wall-Mount, you can level up the TV by adjusting the horizontal level of the WMN-M15E from 1-degree to 2-degrees. If you cannot level up the TV with this adjustment, then you need to reinstall the bracket to the wall and TV.