Sanus VLT6-B3 Advanced Tilt Premium Wall Mount For 46″ – 90″ TVs
The Sanus VLT6-B3 is a revolutionary tilting TV mount, at a budget friendly price. Large TVs installed on traditional tilting mounts often hit the wall, limiting the maximum tilt range. The VLT6-B3 extends from the wall 5.7″, getting you the maximum tilt possible for your TV. Not only are the extenders handy for positioning your TV, but they help with installation. Rather than having to remove your mounted TV to connect new gear, just tilt it up. There’s plenty of room to reach back behind your set and connect those cables. Once you’ve secured the wall plate to the wall and attached the brackets to your TV, the whole TV assembly just slides into position. A safety lock that closes with an audible click to let you know it’s securely in place. The TV assembly can be shifted slightly left or right on the wall plate. So even if your wall studs are off-center, your TV doesn’t have to be. You can also level your set after installation.
- Designed to fit 46″-90″ TVs & easily hold up to 150lbs, keeping your TV safe on the wall.
- Features 5.7″ of extension on a tilting mount, allowing even 90″ TVs to get the maximum tilt range possible, and eliminate screen glare.
- Extending from the wall also gives you easy access to cables behind the screen. Which makes hooking up your components a breeze.
- With side to side shift and post install height & level adjustments, you can still get a perfect finish, even if your stud placement and handiwork aren’t flawless.
- An open wall plate design means the VLT6-B3 can be mounted directly over electrical outlets for simple power connection.
- Our 3-step install process is made to be simple, you’ll be done in under 30 minutes. Mount with confidence, our mounts are UL-listed for quality and safety.
TILT MECHANISM: The Sanus VLT6 Advanced Tilt Premium Wall Mount lets you tilt your television up 7° or down 12°. It positions your TV 2.75″ from the wall and offers 5.75″ of extension.
5.75″ OF EXTENSION: The Sanus VLT6-B3 Advanced Tilt Premium TV Wall Mount features a revolutionary design, providing 5.75″ of extension on a tilting mount. The extension allows even the largest of TVs to achieve the maximum listed tilt range. Large TVs installed on traditional tilting mounts often hit the wall, limiting the maximum tilt that can be achieved. The VLT6-B3 solves this issue by extending from the wall, offering TVs a larger tilt range. More tilt translates to better glare reduction. This makes the VLT6 the go-to tilting mount for all above-eye-level mounting locations, like over the fireplace. Additionally, because the mount can extend the TV 5.75″ from the wall, cables and wires can be accessed quickly and easily while the TV is still mounted. This makes the initial hook-up and future device switches a quicker and easier process.
OPEN WALL PLATE: An open wall plate design allows the VLT6-B3 to be mounted directly over electrical outlets for a super clean installation. The VLT6’s wall plate must be mounted to wall studs or anchored to a solid concrete or concrete block wall using the supplied lag bolts (and wall-anchors). The slots in the wall plate can accommodate a variety of stud spacing, allowing you to easily mount the VLT6-B3 to wall studs that are 16″ or 24″ on center.
PERFECT POSITIONING: Centering the TV, even with off-center studs, is no longer an issue due to the side-to-side shift. Post-installation height and level adjustments make fine-tuning quick and easy for a perfectly level TV.
SAFETY TABS: Once the wall plate is anchored to the wall studs and the two TV brackets are attached to the back of your television, the two TV brackets hook into the wall bracket. Integrated safety tabs on the TV brackets provide a safe and easy connection to the wall bracket you can hear. These safety tabs also allow you to easily remove the TV and TV brackets from the wall plate.
CONSTRUCTION: The Sanus VLT6-B3 Advanced Tilt Premium TV Wall Mount is constructed of heavy-gauge steel and high-impact plastic with a durable powder-coated black finish.