Stinger SK4681C Power Wiring Kit | Alpine SWR-8D4 Sub | Alpine MRV-M500B Sub Amp | Alpine SBR-8XP Sub Enclosure – Bundle
What’s Included in This Bundle:
(1) Stinger SK4681C 8GA 700 Watt Complete Power Wiring Kit
(1) Alpine SWR-8D4 8″ (20cm) Type-R Subwoofer
(1) Alpine MRV-M500B Mono V-Power Digital Amplifier
(1) Alpine SBR-8XP Bassworx Revolution Series R-Type 8″ Ported Sub Enclosure
Stinger SK4681C 8GA 700 Watt Complete Power Wiring Kit
Designed specifically for car audio systems up to 600 Watts or 60 Amps
– 4000 Series, 2 channel audiophile grade interconnects
– Made from 100% oxygen-free Copper for a pure uninterrupted transfer of power
– Tru-Spec cables/wires
– Tinned conductors for corrosion resistance
– AGU Style Fuse Holder (SPD5101) for Maximum Power Delivery and Safety
– Matte finish hyper-twist wire construction provides excellent flexibility
– Pre-terminated power connections provide reliable performance
– 18ft./5.5m Matte Red Hyper-Twist 8GA Power Wire
– 3ft./0.9m Matte Black Hyper-Twist 8GA Ground Wire
– (1) 17ft./5.2m 4000 Series 2-Channel Audio Interconnect (SI4217)
– 17ft./5.2m Matte Blue 18Ga Remote Turn-On Wire
– SPD5101 AGU Fuse Holder
– 60 Amp AGU Fuse
– 8GA Crimp Ring Terminals Pre-Installed
– 16GA Blue Butt Connector
– 8GA Snap In Protective Firewall Grommet
– Self-Drilling Mounting Screws
– (10) 7”/17.8cm Wire Ties
Alpine SWR-8D4 8″ (20cm) Type-R Subwoofer
These redesigned, fifth-generation Type-R subwoofers include several enhanced features to achieve even cleaner, deeper bass extension, faster, more accurate transients and even greater output capability than before.
Extreme bass fits in more places
The Type-R Subs have been completely redesigned to offer more installation flexibility and application versatility to build the ideal sound system. At 115 mm of mounting depth for the 8” (20 cm) this new design offers even greater output capability.
More Excursion = More Output
The new FEA-Optomized Motor Structure together with our revolutionary High-Amplitude Multi Roll (HAMR) Suspension Design gives the new Type-R Subwoofers the highest X-max and SPL output in the category.
With a real-world, measured 12 mm of X-max, allow the new 8” (20cm) Type-R Subwoofers to deliver the best-in-class bass output, ultra-low distortion, and unparalleled sound quality.
More Motor Force = More Control
Starting with a new ten piece, segmented magnet structure, the new Type-R subwoofers deliver more accurate, louder and cleaner bass with even more control. This new magnet assembly is also an integral part of the next generation of Alpine’s Patented Radial Vented VC cooling system.
Keep it Cool = Keep it Playing
Alpine’s Patented Radial Vented VC Heatsink and Airflow Management System (US Patent #7,634,101) helps to minimize power compression and ensures reliable long playing time by actively eliminating output-robbing heat away from the Voice Coil. The new one-piece cast aluminum frame with integrated shorting sleeve uses the entire frame as a heatsink, to allow for sustained power output and handling, even in the most extreme of applications.
FEA Optimized = Maximum Linearity
Alpine’s Patented Compound Radius Curve pole geometry ensure for an ultra symmetrical magnetic field, while optimizing flux density to greatly reduce distortion, while further improving power handling and output.
Improved Power Handling
The oversized 38 mm voice coil allows for increased power handling of 350W RMS / 1000W Peak. To get the best performance, we recommend you pair Type-R subs with Alpine’s new PDX digital amplifiers.
Alpine MRV-M500B Mono V-Power Digital Amplifier
Raising the Bar
The new V-Power products are now Class D digital amplifiers, resulting in a huge efficiency gain versus their predecessors without draining your battery or your pockets. Class-D provides continuous clean power to your speakers, operating at 80% efficiency far greater than conventional Class A or B amplifiers. Translation: Enjoy cleaner bass, even during extreme power demands.
Big Power, Small Package
V-Power amplifiers are known for their compact size, but don’t underestimate their power capacity. Although they have a 40% smaller footprint than their predecessors, they produce the same amount of power as before. Get the power you need, even if you have limited installation space.
Keep the Music Playing
The V-Power amplifiers provide reliable, stable thermal performance. They use a new, higher efficiency design to achieve non-stop music playback. A new circuit and heat sink design allows gradual thermal absorption and provides a gentle, almost undetectable power control.
Dual Feedback Modulation
Dual internal error correction technology – which had previously only been available in the PDX and X-Power amplifiers, is now integrated in V-Power mono amplifiers. The audio input signal is analyzed, compared, and corrected twice dynamically as the signal is processed through the amplifier. The result is amplifiers with the widest frequency response, higher damping factor, and lowest noise in its class.
Exceptionally Simple Sound Upgrade
The V-Power’s 4-channel speaker level inputs connect directly to any head unit, without the need for external converters. This makes the V-Power amplifiers ideal for upgrading factory and aftermarket systems. The flush mount controls make for easy installation. The terminal covers conveniently snap-on without the need for additional tools, to protect the wiring connections while creating a clean, finished appearance.
Each V-Power amplifier comes with its very own birth-sheet. V-Power amplifiers are tested and documented to show their true actual output.
Remote Bass Level Adjustment
The MRV-M500 and MRV-M250 mono models are compatible with the RUX-KNOB remote bass knob (sold separately). Use the RUX-KNOB to conveniently adjust bass levels from your dash.
Alpine SBR-8XP Bassworx Revolution Series R-Type 8″ Ported Sub Enclosure
The innovative, compact, space-saving enclosure design makes it easy for the SBR-8XP to be installed freely in a variety of vehicle trunk spaces. This 8″ ported subwoofer enclosure is constructed from high-quality MDF and the exterior is fully covered in black carpet. A convenient integrated shelf makes installing an amp easy and the binding post speaker terminals ensure a secure quality connection.
– Designed to fit most Cars, SUVs andTrucks
– Fits 8″ Subwoofers
– 3-1/2″ Mounting Depth
– MDF Construction with Ported/Vented Design
– Black Carpet Exterior
– Binding Post Speaker Terminals
– Integrated Amp Shelf
– Shelf Dimensions (W x D x H): 7-3/4″ x 10-1/2″ x 1-3/4″
– Internal Volume: 0.43 cu. ft.
– External Dimensions (W x D x H): 19.5″ x 13″ x 7-1/4″
– Weight: 8.42kg