{"product_id":"blustream-uex3d-wp-eu-usb-3-2-gen1-hdbaset-wall-plate-extender","title":"Blustream UEX3D-WP-EU USB 3.2 Gen1 HDBaseT Wall Plate Extender (UEX3DWPEU)","description":"\u003ch3\u003eBlustream UEX3D-WP-EU USB 3.2 Gen1 HDBaseT Wall Plate Extender (UEX3DWPEU)\u003c\/h3\u003e\n\u003cp\u003eThe Blustream UEX3D-WP-EU USB 3.2 Gen1 HDBaseT Extender EU Wall Plate - Device is engineered to allow remote connectivity to a USB 3.2 Gen1 Host at distances of up to 100m \/ 330ft over a single CAT6A cable. Designed in a dual EU \/ UK wall plate format, it connects up to four USB devices to a compatible Blustream USB HDBaseT Receiver (Host) extender with support for a combined transmission data bandwidth of up to 5Gbps.\u003c\/p\u003e\n\u003ch4\u003eLong-Distance USB 3.2 Gen1 Extension\u003c\/h4\u003e\n\u003cp\u003eThe UEX3D-WP-EU utilises HDBaseT technology to extend USB 3.2 Gen1 signals up to 100m \/ 330ft, making it ideal for installations where USB devices need to be located away from the host system. It is recommended to use a minimum of CAT6A cabling, and signal distribution bandwidth and distance are subject to the length of device and host USB cables, and CAT cable type.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSupports USB 3.2 signal extension up to 100m over HDBaseT\u003c\/li\u003e\n\u003cli\u003eSingle CAT6A cable connection recommended\u003c\/li\u003e\n\u003cli\u003eCombined USB 3.2 Gen1 data transfer rate up to 5Gbps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eConnect Up to Four USB Devices\u003c\/h4\u003e\n\u003cp\u003eThis wall plate device supports connection for four USB devices, with 2 x USB Type A and 2 x USB-C ports. It is ideal for applications requiring extension of USB 3.2 Gen1 conferencing cameras, video capture devices, flash\/hard drives, KVM devices, audio devices, and other USB 3.2 Gen1 devices.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 x USB Type A, female\u003c\/li\u003e\n\u003cli\u003e2 x USB Type C, female\u003c\/li\u003e\n\u003cli\u003eBackwards compatible with USB 2.0 and 1.1 devices\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFlexible Power and Simple Installation\u003c\/h4\u003e\n\u003cp\u003eThe UEX3D-WP-EU utilises bi-directional Power over Cable (PoC) to power from either end of the HDBaseT link and provides up to 3A combined power to USB devices, with up to 1.7A per single USB port. Installation is simple thanks to plug and play operation with no driver installation or setup required, and PoC can be enabled or disabled via dipswitch.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBi-directional PoC supports 12-48V PoC\u003c\/li\u003e\n\u003cli\u003ePSU supplied with the Device end of the link only\u003c\/li\u003e\n\u003cli\u003eConfigurable USB device power management via API commands\u003c\/li\u003e\n\u003cli\u003eSimple plug and play design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eBuilt for Compatible Blustream Systems\u003c\/h4\u003e\n\u003cp\u003eThis device is designed for use with compatible Blustream USB 3.2 HDBaseT Host products, including the Blustream UEX3H and UEX3H-WP. It also supports bi-directional RS-232 when used with compatible HDBaseT products.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with Blustream UEX3H and UEX3H-WP\u003c\/li\u003e\n\u003cli\u003eSupports bi-directional RS-232 with compatible HDBaseT products\u003c\/li\u003e\n\u003cli\u003eUSB 3.2 data transfer only\u003c\/li\u003e\n\u003cli\u003eDoes not support DP Alt Mode video pass-through\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFrequently Asked Questions\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow far can the UEX3D-WP-EU extend USB 3.2 Gen1 signals?\u003c\/strong\u003e It supports USB 3.2 Gen1 signal extension up to 100m \/ 330ft over HDBaseT using a single CAT6A cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow many USB devices can be connected? \u003c\/strong\u003eThe wall plate supports 4 x USB devices in total: 2 x USB Type A and 2 x USB-C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIs it compatible with USB 2.0 and 1.1 devices?\u003c\/strong\u003e Yes. The UEX3D-WP-EU is backwards compatible with USB 2.0 and 1.1 devices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this product support DP Alt Mode video pass-through over USB-C? \u003c\/strong\u003eNo. This product is for USB 3.2 data transfer only and does not support DP Alt Mode video pass-through.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes it require a compatible host unit?\u003c\/strong\u003e Yes. It requires a compatible Blustream USB 3.2 HDBaseT Host product, including the Blustream UEX3H and UEX3H-WP.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eReady to extend USB devices across your AV installation? Add the Blustream UEX3D-WP-EU USB extender to your cart today for remote USB 3.2 Gen1 connectivity over HDBaseT. Contact the audio experts at Gibbys Electronic Supermarket for advice on matching HDBaseT host extenders and installation accessories!\u003c\/p\u003e","brand":"Blustream","offers":[{"title":"Default Title","offer_id":52246407905554,"sku":"UEX3D-WP-EU","price":660.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/5226\/2162\/files\/BlustreamUEX3D-WP-EU_0003_Layer1.jpg?v=1778074960","url":"https:\/\/gibbyselectronicsupermarket.ca\/products\/blustream-uex3d-wp-eu-usb-3-2-gen1-hdbaset-wall-plate-extender","provider":"Gibbys Electronic Supermarket","version":"1.0","type":"link"}