{"product_id":"rockford-fosgate-rfpol-rc34-ride-command-interface-for-stage-3-and-stage-4-systems","title":"Rockford Fosgate RFPOL-RC34 Ride Command Interface for Stage-3 and Stage-4 Systems","description":"\u003ch3\u003eRockford Fosgate RFPOL-RC34 Ride Command Interface for Stage-3 and Stage-4 Systems\u003c\/h3\u003e\n\u003cp\u003eThe Rockford Fosgate RFPOL-RC34 is designed to connect Rockford Fosgate amplifiers to a factory Polaris Ride Command source unit while keeping the factory audio system at the center of your setup. Designed for RZR, RANGER, and GENERAL models equipped with Ride Command, this interface taps both front and subwoofer audio signals and sends them to a compatible TM400X4ad amplifier.\u003c\/p\u003e\n\u003ch4\u003eConnect Factory Ride Command to Your Audio System\u003c\/h4\u003e\n\u003cp\u003eWhy replace the factory Ride Command source when you can keep using it? The Rockford Fosgate RFPOL-RC34 retains the factory Ride Command as the audio source while providing the audio signals needed for the amplifier. Its two-part harness connects with the front\/rear speaker amplifier and subwoofer amplifier so the correct audio frequencies reach the appropriate speakers.\u003c\/p\u003e\n\u003ch4\u003eBuilt-In Noise Suppression\u003c\/h4\u003e\n\u003cp\u003eThe RFPOL-RC34 features an active electronic noise suppressor designed to filter electronic noise caused by the DYNAMIX suspension system. It also eliminates pulse-width-modulated noise associated with the DYNAMIX suspension system. Think of it as a filter that helps keep unwanted electrical noise from becoming part of your audio experience.\u003c\/p\u003e\n\u003ch4\u003eUse Ride Command Crossovers\u003c\/h4\u003e\n\u003cp\u003eThe interface allows the audio system to take advantage of the built-in Ride Command crossovers. It utilizes a 100 Hz high-pass filter and 100 Hz low-pass filter to help distribute the appropriate audio frequencies between the front audio and subwoofer channels.\u003c\/p\u003e\n\u003cp\u003eThe front channels power the front audio, while the rear channels power the subwoofer. With the two-part harness handling these signals, the Ride Command system can properly direct the correct frequencies to the appropriate speakers.\u003c\/p\u003e\n\u003ch4\u003eDesigned for Polaris Ride Command Systems\u003c\/h4\u003e\n\u003cp\u003eThe Rockford Fosgate RFPOL-RC34 is designed specifically for RZR, RANGER, and GENERAL vehicles equipped with Ride Command. It is compatible with both 5-button and 7-button Ride Command systems, giving you flexibility across supported factory configurations.\u003c\/p\u003e\n\u003ch4\u003eAmplifier Compatibility\u003c\/h4\u003e\n\u003cp\u003eThe harness plugs exclusively into the Rockford Fosgate TM400X4ad amplifier. The interface also includes a remote-out connection for turning on a Rockford Fosgate amplifier. This keeps the factory Ride Command source while providing the necessary connection between the source unit and compatible amplifier.\u003c\/p\u003e\n\u003ch4\u003eCleaner Audio Signal Distribution\u003c\/h4\u003e\n\u003cp\u003eGetting the right signal to the right speaker matters. The Rockford Fosgate RFPOL-RC34 feeds both front and subwoofer audio from Ride Command to the amplifier while using the system's built-in crossovers. The result is a straightforward way to manage front and subwoofer audio signals within a compatible Ride Command system.\u003c\/p\u003e\n\u003cp\u003eThe interface also eliminates the turn-on pop associated with the Ride Command unit, adding another useful feature to the signal connection between the factory source and Rockford Fosgate amplifier.\u003c\/p\u003e\n\u003ch4\u003eKey Features of the Rockford Fosgate RFPOL-RC34\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eActive electronic noise suppressor\u003c\/li\u003e\n\u003cli\u003eRetains the factory Ride Command as the audio source\u003c\/li\u003e\n\u003cli\u003eDesigned for RZR, RANGER, and GENERAL equipped with Ride Command\u003c\/li\u003e\n\u003cli\u003eCompatible with both 5-button and 7-button Ride Command systems\u003c\/li\u003e\n\u003cli\u003eEliminates pulse-width-modulated noise in the DYNAMIX suspension system\u003c\/li\u003e\n\u003cli\u003eEliminates turn-on pop associated with the Ride Command unit\u003c\/li\u003e\n\u003cli\u003eFeeds front and subwoofer audio from Ride Command to the amplifier\u003c\/li\u003e\n\u003cli\u003eUtilizes built-in 100 Hz high-pass and 100 Hz low-pass Ride Command crossovers\u003c\/li\u003e\n\u003cli\u003eIncludes remote-out to turn on a Rockford Fosgate amplifier\u003c\/li\u003e\n\u003cli\u003eHarness plugs exclusively into the TM400X4ad\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Rockford Fosgate RFPOL-RC34 provides a direct way to connect a factory Polaris Ride Command source unit with a compatible Rockford Fosgate amplifier. With front and subwoofer signal handling, active electronic noise suppression, built-in crossover support, and compatibility with both 5-button and 7-button Ride Command systems, it keeps the factory source while helping deliver properly distributed audio signals.\u003c\/p\u003e\n\u003ch4\u003eFAQs\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the Rockford Fosgate RFPOL-RC34 designed to do?\u003c\/strong\u003e The Rockford Fosgate RFPOL-RC34 connects Rockford Fosgate amplifiers with a factory Polaris Ride Command source unit and feeds front and subwoofer audio signals to the amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhich vehicles is the RFPOL-RC34 designed for?\u003c\/strong\u003e It is designed for RZR, RANGER, and GENERAL vehicles equipped with Ride Command.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIs the RFPOL-RC34 compatible with different Ride Command controls?\u003c\/strong\u003e Yes. It is compatible with both 5-button and 7-button Ride Command systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat type of noise does the RFPOL-RC34 help eliminate?\u003c\/strong\u003e It uses an active electronic noise suppressor to filter electronic noise caused by the DYNAMIX suspension system and eliminates pulse-width-modulated noise associated with that system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhich amplifier does the RFPOL-RC34 plug into?\u003c\/strong\u003e The harness plugs exclusively into the Rockford Fosgate TM400X4ad amplifier.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Rockford Fosgate","offers":[{"title":"Default Title","offer_id":52707658596626,"sku":"RFPOL-RC34","price":249.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/5226\/2162\/files\/Rockford_Fosgate_RFPOL-RC34.jpg?v=1789476936","url":"https:\/\/gibbyselectronicsupermarket.ca\/products\/rockford-fosgate-rfpol-rc34-ride-command-interface-for-stage-3-and-stage-4-systems","provider":"Gibbys Electronic Supermarket","version":"1.0","type":"link"}