Klipsch KI-102-SMA-II Black 8" Commercial 2-Way Loudspeaker – Each

Klipsch KI-102-SMA-II Black 8" Commercial 2-Way Loudspeaker - Each

The Klipsch KI-102-SMA-II is Priced and Sold as Each, For a Pair Add Two to Your Cart.

The Klipsch KI-102-SMA-II is a compact two-way trapezoidal loudspeaker system capable of superb voice and music performance in permanent limited-space installations. It is recommended for use in restaurants, clubs, schools, churches, health clubs, and corporate A/V production environments where fidelity requirements are high but real estate is limited. The KI-102-SMA-II features a hybrid Tractrix "Mumps" Horn. These horns exhibit improved coverage control than earlier generations of Tractrix Horns. CNC fabrication techniques dado “lock-tab” and rabbet joint construction contribute to industry leading reliability maximum precision and ruggedness and a cabinet remarkably free from resonance and cabinet-induced coloration. Mounting capabilities include top and bottom attachments for the optional SB-102 “U”-shaped bracket The KI-102 compact high power loudspeaker system shall include an 8" (203.2mm) K-8-E low-frequency transducer utilizing a 1.5" (38.1mm) voice coil and 20-ounce (622g) magnet, and a K-103-TI-KP 1" (25.4mm) titanium diaphragm high frequency five-ounce (155.5g) magnet compression driver mounted on a 90? X 90? heavy-duty, injection-molded modified Tractrix Horn. Signal shall be applied to the transducers via a passive internal frequency dividing network, incorporating a KLIP-circuit for signal overload protection of the high frequency transducer. The enclosure tuning shall be of a vented design. Frequency response shall be 75Hz to 17kHz, ±4dB, with the -10dB point at 62Hz, measured at three meters, half-space anechoic. The dispersion angle shall be 90? X 90? nominal (refer to graph). Directivity shall be 7dB (refer to graph). Sensitivity shall be 96dB SPL, measured at one meter, half-space anechoic, with a 2.83V input. Power handling shall be 100 watts (21.2 volts), to AES standards, continuous pink noise, 50Hz to 10kHz, 6dB peaks. Maximum continuous output at one meter shall be 113dB SPL. Nominal impedance shall be 8 ohms, with 4.5 ohms minimum at 8kHz. The internal passive crossover frequency shall be 3kHz, with slopes of 12dB/octave for the low frequency and 18dB/octave for the high frequency. Full-range connections shall be made via standard five-way binding posts, enabling direct stripped wire, lug, pin, single or dual banana plug interface. The enclosure panels shall be CNC-fabricated, 3/4" MDF, assembled utilizing rabbet and dado joinery. Dimensions for the enclosure shall be 18.813" (47.785cm) high by 9.813" (24.925cm) deep by 11.313" (28.735cm) front width and 4.063" (10.32cm) rear width in a symmetrical trapezoidal shape, with both side panels angled at 22.5?. Net weight shall be 19 lbs. (8.626kg). The top and bottom panels shall be radiused, with a metal perforated grille for structural integrity and protection of the transducers from impact and tampering. Enclosure mounting shall be via internal top and bottom T-nuts for the accessory Klipsch SB-102 “U”-shaped bracket. The enclosure shall be coated with lacquer-based primer and lacquer-based texture, with a black or white finish. The enclosure shall also be available unfinished in raw MDF.