![Affirm Logo](https://cdn.shopify.com/s/files/1/0780/5226/2162/files/affirm-logo-26pxh.png?v=1695328184)
Payment as low as
This monthly payment does not include any applicable tax or interest
Free Shipping |
Lowest Price Guarantee
This product is backorderable
Product Descriptions
Product Descriptions
JL Audio JD250/1 Monoblock Class D Subwoofer Amplifier - #98360
Monoblock Class D Subwoofer Amplifier, 250 W x 1 @ 2 Ohm / 150 W x 1 @ 4 Ohm - 14.4V
Designed to produce a healthy 250 watts into 2 ohms (14.4V, 1% THD), the JD250/1 amplifier is a great solution for powering subwoofers in a cost-conscious system. Our proprietary NexD™ switching technology delivers large amounts of real-world power output with excellent efficiency and ultra-low distortion.
The JD250/1’s controls are located on the input panel. while the power and speaker connections can be found along the opposite end of its extruded aluminum chassis. Signal processing features include a 12 dB / octave low-pass filter, with continuously variable frequency selection from 50-500 Hz, and a variable bass boost EQ. Dual-range, differential-balanced inputs are also on-hand, capable of accepting line-level and speaker-level signals. Automatic turn-on capability (via signal sensing or DC-offset sensing) is standard, along with a set of preamp outputs so you can easily pass signals to another amplifier.
The JD250/1 is also equipped with an onboard LED-clipping indicator ring, surrounding the input sensitivity control. This useful feature lets you easily set your amplifier’s input sensitivity, quickly and accurately, without special equipment. With the addition of an RBC-1 remote level control (sold separately), you can control the subwoofer level from the driver’s seat.
Power up the bass
JL Audio's JX Series amplifiers were very popular with our customers, garnishing rave reviews citing their tremendous performance and value. We think their latest JD Series amps will follow in their footsteps, offering superior power and serious features for your dollar. The JD250/1 mono subwoofer amplifier will send up to 250 watts RMS to a sub, so you'll hear and feel the bass clearly over road and engine noise. A variable low-pass filter and bass boost help you tune your sub to fit your system and sound its best. An optional wired remote control lets you turn the sub up or down from the front seat.
Connection features
The amp includes speaker-level inputs with signal-sensing amp turn-on, along with preamp inputs and outputs, so it's ready to work in virtually any system. Differential-balanced inputs plus JL Audio's NexD™ amp technology keep the signal sounding pure and noise-free at all times.
Features
Amplifier Power Ratings:
-
At 14.4 volts: >80 dB S/N, 1% THD+N
- 4 Ohm: 150 watts RMS
- 3 Ohm: 200 watts RMS
- 2 Ohm: 250 watts RMS
-
At 12.5 volts: >80 dB S/N, 1% THD+N
- 4 Ohm: 115 watts RMS
- 3 Ohm: 150 watts RMS
- 2 Ohm: 200 watts RMS
Clipping LED: Using a 50 Hz sine-wave test tone recorded at 0 dB reference level (not included), the clipping LED helps you set the gain control to the maximum unclipped level.
Low Pass Crossover: The 12dB/octave low-pass filter is always engaged; it cannot be bypassed. The crossover point is continuously variable from 50-500 Hz.
Bass Boost: The bass boost circuit is variable from 0 to +12dB. The boost is centered at 45Hz.
Protection Circuitry: The JD250/1's protection circuitry automatically turns the amplifier off if thermal limits are exceeded, a short circuit is detected in the speaker wiring, or the input voltage drops below 11 volts.
Wired Remote: An optional RBC-1 Remote Level Control (sold separately) can be added, allowing you to adjust the amp's output level from the front of the vehicle. Controls:
- Input Sensitivity: rotary control; used to match your source unit's output voltage to the input stage of the amplifier for maximum clean output; the range of the dial depends on how the Input Voltage switch is set
-
Input Voltage: 2-position switch:
- Low: input sensitivity control (gain) range is 200mV-2V; used with the preamp output of typical aftermarket radios
- High: input sensitivity control (gain) range is 800mV-8V; used with speaker level outputs and high output preamps
- Low Pass Crossover Frequency: rotary control; continuously variable from 50-500 Hz
-
Turn-on Mode: 3-position switch:
- Remote: use when the source unit has a +12 volt remote turn-on wire (preferred method)
- Offset: the amp reads a small DC signal typical on the speaker level output of factory radios (senses the offset on the left input)
- Signal: detects a midrange speaker level signal on the input; turns off after approximately 30 with no signal
- Bass Boost: rotary control; continuously variable from 0 to +12 dB
Connections:
-
Power: The power, ground, and remote turn-on connections are set-screw terminals:
- Power and Ground: accept up to 4-gauge wire (8-gauge minimum recommended); the included 3mm hex key is used to tighten/loosen the set-screws
- Remote Turn-on: accepts up to 10-gauge wire (18-gauge minimum recommended); the included 2.5mm hex key is used to tighten/loosen the set-screw
- Subwoofer Output Terminals: The subwoofer outputs are set-screw terminals. They accept up to 8-gauge wire (16-gauge minimum recommended). There are two pair of outputs, internally wired in parallel, making it easy to connect two subwoofers. The included 2.5mm hex key is used to tighten/loosen the set-screws.
- Signal Inputs: The stereo RCA input jacks accept either preamp or speaker level signals. When connecting speaker level signals, a speaker wire to RCA adapter is useful. The left and right channels are internally summed to mono.
- Preamp Outputs: The stereo RCA preamp outputs pass the signal connected to the RCA inputs, so another amplifier can be added easily. The output is not affected by the JD250/1's gain, crossover, or bass boost controls. The preamp output signal is buffered to prevent noise.
- Remote Level Control: The RJ-25 connection is used for the optional optional RBC-1 wired remote.