JL Audio XMD-USB/3.5MM-PNL Audio Jack and USB Port - #90698

JL Audio XMD-USB/3.5MM-PNL Audio Jack and USB Port - #90698

JL Audio XMD-USB/3.5MM-PNL Audio Jack and USB Port panel-mount combination jack facilitates the creation of a permanent connection point for a wide variety of portable audio sources, including USB-compatible digital music players, thumb drives and smartphones. The jack accepts a 3.5 mm stereo plug for analog audio signals, providing output via a pair of male RCA plugs. A separate 9-wire USB Type A jack is provided for connection and charging of digital devices, outputting via a male USB Type A connector (USB 2.0 and USB 3.0-compatible). An appropriate USB cable for your device is required to make the input connection.

This product is designed to be mounted to any flat surface up to 1-inch thick. Mounting requires a 1.125-inch hole and is tightened into place with a plastic wing-nut on the opposite side of the mounting surface. A labeled rubber cover with a tight-fitting seal provides protection against the elements.

Designed to mount on any flat surface up to 1" thick, this jack offers two inputs: a 3.5 mm analog stereo minijack and a 9-wire USB Type A jack. The minijack cable ends in a pair of male RCA plugs, while the USB cable ends in a male USB Type A connector that's USB 2.0- and USB 3.0-compatible. You'll need an appropriate USB cable for your device, of course.

To install it, you'll need to drill a 1-1/8-inch hole, insert the jack, then tighten the plastic wing-nut on the opposite side of the mounting surface. A labeled rubber cover with a snug-fitting seal protects the front of the jack from the elements.

Combo 3.5mm/USB Port for Panel-Mounting

This panel-mount combination jack facilitates the creation of a permanent connection point for a wide variety of portable audio sources (including USB-compatible digital music players, thumbdrives, and smartphones) to your amplified system.

Minijack-to-RCA

The panel-mount jack features a female 3.5mm stereo minijack, while the cable end provides output via a pair of male RCA jacks for analog audio signals.

USB Extension

The panel-mount jack also features a female USB (type-A) jack for connection and charging of digital devices, outputting via a male USB (type-A) connector; USB 2.0 and USB 3.0-compatible.

Mounting Options

This product is designed to be mounted to any flat surface up to 1" thick and requires a 1.125" in diameter cutout. It is tightened into place with a plastic wing-nut on the opposite side of the mounting surface.

Rubber Protective Cover

A labeled ("Audio 3.5mm-USB") rubber cover with a tight-fitting seal provides protection against the elements.