Hello
Add your address
Delivery Options
Choose your location

or enter a Canadian postcode
Apply
Speeds may vary for different addresses.
Saving ...

Rockford Fosgate P600X4 Punch 600 Watt 4-Channel Amplifier

Brand: Rockford Fosgate
Model Number: P600X4
UPC: 780687342289
Rockford Fosgate
Model Number: P600X4
UPC: 780687342289

Rockford Fosgate P600X4 Punch 600 Watt 4-Channel Amplifier

  • High level input capable with Auto Turn-On circuit
  • RCA pass-thru outputs
  • Features C.L.E.A.N. Set-up
  • 12dB/octave Butterworth crossover
  • On-board Punch EQ with +18dB boost @ 45Hz

Save $130.00

$699.99

$829.99

|

OR

|

Payments as low as

$58.33/mo

PayBright
30 DAY RETURN POLICY
LOW PRICE GUARANTEE

Product Description

Features & Specifications

Documents

Warranty

Rockford Fosgate P600X4 Punch 600 Watt 4-Channel Amplifier

The Rockford Fosgate P600X4 is a 4-channel amplifier producing 150 Watts into all four channels at 2-Ohm. The Rockford Fosgate P600X4 is perfect for a 4-way full-range system or a 3-way system having a front stage with subwoofers on the rear channels. The Punch P600X4 multi-channel amplifier is versatile to power any audio system configuration. In addition to 4-channel stereo mode, you can bridge both channels to create a high power 2-channel amp, or run stereo speakers on the front with subwoofers on the rear in 3-channel mode. The variable HP/LP crossover and built-in Punch EQ allows for precise tuning of Bass frequencies and the Pass-Thru RCA jacks provide flexibility as your system grows and keeping Y-adapters to a minimum.

Big power for your speakers or subwoofers

Rockford Fosgate’s Punch P600X4 amplifier can put out 75 watts RMS to each of your front and rear speakers, plenty of power for clean music even at high levels. You can use the amp’s high-pass filter to remove low bass from your speakers so they’ll play more efficiently. You can also switch this amp into 2-channel mode to drive a couple of subwoofers with up to 300 watts RMS each. The amp’s low-pass filter comes in handy for getting the right sound from your sub/enclosure combo. The Punch EQ2 includes bass and treble boosts, in case you want to add some boom and sizzle back into the mix.

Easy to set for optimum performance

Once again, Rockford Fosgate steps away from the crowd with their C.L.E.A.N. technology (Calibrated Level Eliminates Audible Noise) — a setup system that ensures your music will sound as clean and powerful as possible. It works like this: play the setup tone on the included test CD, adjust the receiver volume until a red clip light on the amp goes out, then turn the amp gain up until a blue light comes on. It’s that simple — your amplifier is now set to match your receiver’s output. When your receiver reaches maximum clean volume, you’ll get maximum clean power from your Punch amp. At quiet listening levels, you’ll hear less background noise and more of your music.

Keeps an eye on things while playing

If that blue light turns solid red while you’re playing music, the amp’s telling you that your source is distorting and you should turn it down, or risk damage to your gear. The optional PLC2 remote level control also doubles as a clip indicator, so you can see from the front seat if your music’s clipping. The amp’s built-in computer keeps tabs on the output current, ensuring that plunging speaker impedances (they change during play) or even a short circuit won’t hurt anything.

Maintaining coolness raises efficiency and lowers distortion

Rockford Fosgate’s Dynamic Thermal Management system uses forced air to dissipate heat evenly across the amp and out through the high-mass heatsink, efficiently drawing heat away from vital internal parts. Their proprietary MEHSA cooling process maximizes the heat transfer from the MOSFET devices to the heatsink, allowing the heat to escape more readily, so the transistors stay cooler and work better.

Available Wiring Diagrams

Please consult your amplifier owner’s manual for lowest recommended impedance.

Wiring Diagram #1

Wiring Diagram #2

Wiring Diagram #3

Wiring Diagram #4

Wiring Diagram #5

Wiring Diagram #6

Rockford Fosgate P600X4

Wiring Diagram #7

Wiring Diagram #8

Rockford Fosgate P600X4

Wiring Diagram #9

Wiring Diagram #10

Rockford Fosgate P600X4
Brand Rockford Fosgate   Model Rockford Fosgate P600X4
Product: Rockford Fosgate P600X4 Punch 600 Watt 4-Channel Amplifier
Specifications

RMS Power Output (Watts x Channels): 75 x 4
Power at 2 Ohms (Watts x Channels): 150 x 4
Bridged Power (Watts x Channels): 300 x 2
Minimum Impedance Bridged: 4
Minimum Impedance Unbridged: 2
Minimum Impedance: 2
Best Frequency Response: 20-20k Hz
THD at Rated RMS Power: 1%
Signal to Noise Ratio: 85 dB
Input Voltage: 14.4v
Amplifier Class: AB
Low-Pass Crossover Frequency: 50-250 Hz
Low-Pass Slope (dB/octave): 12 dB/octave
High-Pass Crossover Frequency: 50-250 Hz
High-Pass Slope (dB/octave): 12 dB
Bass Boost: 0-18 dB
Bass Boost Frequency: 45 Hz
Fan Cooled: No
Fuse Rating: 100
Speaker Level Inputs: Yes
Preamp Outputs: 2
Width (inches): 13-3/8
Height (inches): 2-7/16
Depth (inches): 8-13/16

What's in the box

Rockford Fosgate Punch P600X4 owner's manual
4-Channel amplifier
Four 1-1/2" Self-tapping screws
2.5mm Allen wrench
Quick setup instructions
Certificate of Performance

Mobile Amplifier Channels

4 Channel

Mobile Amplifier Class

Class AB

Mobile Amplifier Features

Bass Boost, High-Pass Filter, Low-Pass Filter, Pre Amp Outputs, Speaker Level Inputs

Mobile Amplifier Fuse Rating

100

Mobile Amplifier RMS

351 to 750 watts

Mobile Min Impedance

2

Estimated Shipping

When you add an item to your cart the Estimated Shipping* cost will be shown.  This estimated shipping* cost is accurate to most major city locations across Canada.  If the shipping cost is higher than the estimated shipping* then GibbysESM will contact you for approval before we process your order.

To learn more click Shipping Terms & Conditions

Rockford Fosgate Canada 1-Year Limited Warranty

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

preloader