Key Digital KDX222PO Power over HDBaseT/HDMI via CAT5e/6 Extenders (TX & RX SET)

Key Digital KDX222PO Power over HDBaseT/HDMI via CAT5e/6 Extenders (TX & RX SET)

4K HDMI over CAT5e/6 HDBaseT Extender Tx + Rx Kit.

10.2Gbps Bandwidth.

IR Emitter and Sensor Included

KDX222PO Features

• HDBaseT over a single KDX222PO CAT5e/6 UTP/STP Extension features fully automatic feedback, equalization, and amplification adjustments based on the length of the cable
• The Tx unit powers the Rx unit in HDBaseT. It only requires one power hookup
• HDCP 2.2: Backward compatibility and compliance with HDCP 2.2
• With AppleTV source at 4K/30 [4:2:2] 12bit deep color, HDR (High Dynamic Range) is possible, enabling more lifelike visuals by allowing for a wider range of brightness levels
• KDX222PO supports up to 4096×2160 60Hz [4:2:0] 8bit, 4096×2160 30Hz [4:2:2] 12bit, and 4096×2160 30Hz [4:4:4] 8bit signals at 4K/UHD resolution
• Up to UHD/4K 30Hz 4:2:2/12 bits or 60Hz 4:2:0/8 bit deep color support
• Standard 3D stereoscopic signal formats are supported in 3D
• KDX222PO features a super slender chassis design for a low profile
• Fully licensed and compatible with HDCP 2.2 and HDMI’s most recent technology, including 4K/UHD 4:2:0/8bit at 60fps
• EDID Control: An internal library contains 15 pre-configured EDID settings as well as native EDID information from output/display devices linked through Rx
• Control over hot plug detection allows integrators to decide whether to force active signal voltage onto associated input devices
• KDX222PO features a Full Buffer System™: Controls EDID Control handshake, TMDS re-clocking and signal re-generation, HDCP authentication with source and display, and Hot Plug Control
• IR Sensor: Without an external IR connection block, line-of-sight IR from the remote(s) is collected by the sensor, which is powered by +5V on the Rx unit’s IR In port
• Two IR channels allow for up-and-down control of objects connected to the Tx and Rx modules
• Bi-Directional control from/to the Tx and Rx unit on the Phoenix connector for RS-232
• Rotary Switch RS-232 Control Mode: Provides connectivity status and Tx unit control
• KDX222PO supports Dolby® TrueHD, Dolby® Digital Plus, Dolby Atmos®, and DTS-HD Master Audio™ multi-channel audio formats for surround sound audio
• For inter-device control between input and output HDMI channels, CEC support
• I2C Communication: Display and Source Authentication using EDID and HDCP
• All RS-232 capable control systems, including Compass Control®, AMX®, Crestron®, KNX®, RTI®, Savant, URC®, Leviton®, etc., are fully controllable via open API

KDX222PO Signal Extension:

• Up to 150 ft. @ 4K 24/25/30(4:4:4)/60(4:2:0) using CAT6A cabling
• Up to 125 ft. @ 4K 24/25/30(4:4:4)/60(4:2:0) using CAT5e/6 UTP/STP cabling
• Up to 250 ft. @ 1080p /1920×1200 using CAT6A cabling
• Up to 230 ft. @ 1080p /1920×1200 using CAT5e/6 UTP/STP cabling