Help
JBL Club A754 4-Channel Car Amplifier with 75W RMS x 4
Product Description
Product Description
JBL Club A754 4-Channel Car Amplifier with Variable Crossover and Preamp Outputs
The JBL Club A754 car amplifier delivers 4-channel amplification for front and rear speakers, with flexible input options that fit both factory and aftermarket car stereo systems. It gives you more control over system tuning and channel configuration, so you can match the amplifier to your speakers, subwoofer setup, and vehicle layout.
Fits More Vehicles with a Compact Chassis
The low-profile chassis and small overall footprint help this amplifier fit in vehicles where space is limited. That matters when you want added amplification without giving up valuable installation space.
- Compact size
- Low-profile chassis
- 320mm x 51.3mm x 180mm
Flexible Power for Different System Layouts
This 4-channel amplifier supports several system configurations, because it can power front and rear speakers in 4-channel mode or switch to bridged operation for other setups. It also supports 3-channel mode, which lets you run a pair of full-range speakers and a subwoofer from one amplifier.
- 75 watts RMS x 4 at 4 ohms
- 100 watts RMS x 4 at 2 ohms
- 200 watts RMS x 2 at 4 ohms in bridged mode
- 4-ohm stable in bridged mode
- 3-channel mode for full-range speakers and a subwoofer
Dial In Your System with Variable Crossovers
Separate high-pass and low-pass crossovers on the front and rear channels give you more precise control over roll-off. As a result, you can tune the amplifier to better suit speaker placement and cabin acoustics.
- Variable electronic crossovers
- Separate high-pass and low-pass crossovers on front and rear channels
- 32-320 Hz crossover range
- 12 dB/octave slope
Integrates with Factory and Aftermarket Stereos
Speaker-level and low-level inputs make it easier to add this amplifier to a wide range of car audio systems. The input level control also adjusts sensitivity for either signal type, which helps match the amplifier to the source unit.
- High- and low-level inputs
- Preamp and speaker-level inputs
- Input sensitivity: 200mVrms to 2.0 Vrms with low-level inputs
- Input sensitivity: 2Vrms to 20Vrms with high-level inputs
- 4 bare wire-to-RCA adapters included
Expand Your System Without Splitters
Full-range preamp outputs support multi-amplifier setups, therefore you can feed an additional amplifier without using splitters. This keeps system expansion straightforward when you plan to add more channels later.
- Full-range preamp outputs
- Feeds an additional amplifier without using splitters
Maintains Clean Signal at High Output Levels
Balanced Differential Inputs help keep noise and distortion low, even at high output levels. They also make the amplifier far less susceptible to line-induced engine noise, which helps preserve cleaner sound in the vehicle.
- Balanced Differential Inputs
- Low noise and distortion
- Reduced susceptibility to line-induced engine noise
Protection Circuitry for Everyday Use
On-board circuitry monitors for common fault conditions to help protect the amplifier during operation. An LED indicator shows when one of these conditions exists, so you have a clear status check at a glance.
- Protection from shorts
- Protection from high temperature
- Protection from overvoltage and undervoltage
- LED status indicator
- 30A x 2 fuse rating
Frequently Asked Questions
-
Can this amplifier work with a factory car stereo?
Yes. Speaker-level inputs allow it to integrate with factory car stereo systems, and it also accepts low-level inputs for aftermarket systems.
-
Can I use it for a subwoofer setup instead of four speakers?
Yes. You can bridge it to 2-channel mode to drive a couple of subs with 200 watts RMS, or use 3-channel mode to power a pair of full-range speakers and a subwoofer.
-
How does it help with system tuning?
It includes separate variable high-pass and low-pass crossovers on the front and rear channels, with a 32-320 Hz range and a 12 dB/octave slope.
-
Can I add another amplifier later?
Yes. Full-range preamp outputs let you feed an additional amplifier without using splitters.
Add the JBL Club A754 car amplifier to your cart to bring flexible 4-channel power and precise tuning control to your vehicle audio system. Contact or visit Gibbys Electronic Supermarket for expert advice on matching amplifiers, speakers, and subwoofers for your next car audio upgrade.
Features & Specs
Features & Specs
Warranty
Warranty
Payment as low as
This monthly payment does not include any applicable tax or interest
Covers shipping up to 7% of product value. If costs exceed this, we'll quote before shipping or cancel and refund.
Free Shipping |
We guarantee the best price in Canada—before or 30 days after purchase.*
Lowest Price Guarantee*
This product is backorderable
Sign up to get notified when it's in stock!
Call 1-866-696-7189
Does not apply to special order items.
Product Description
Product Description
JBL Club A754 4-Channel Car Amplifier with Variable Crossover and Preamp Outputs
The JBL Club A754 car amplifier delivers 4-channel amplification for front and rear speakers, with flexible input options that fit both factory and aftermarket car stereo systems. It gives you more control over system tuning and channel configuration, so you can match the amplifier to your speakers, subwoofer setup, and vehicle layout.
Fits More Vehicles with a Compact Chassis
The low-profile chassis and small overall footprint help this amplifier fit in vehicles where space is limited. That matters when you want added amplification without giving up valuable installation space.
- Compact size
- Low-profile chassis
- 320mm x 51.3mm x 180mm
Flexible Power for Different System Layouts
This 4-channel amplifier supports several system configurations, because it can power front and rear speakers in 4-channel mode or switch to bridged operation for other setups. It also supports 3-channel mode, which lets you run a pair of full-range speakers and a subwoofer from one amplifier.
- 75 watts RMS x 4 at 4 ohms
- 100 watts RMS x 4 at 2 ohms
- 200 watts RMS x 2 at 4 ohms in bridged mode
- 4-ohm stable in bridged mode
- 3-channel mode for full-range speakers and a subwoofer
Dial In Your System with Variable Crossovers
Separate high-pass and low-pass crossovers on the front and rear channels give you more precise control over roll-off. As a result, you can tune the amplifier to better suit speaker placement and cabin acoustics.
- Variable electronic crossovers
- Separate high-pass and low-pass crossovers on front and rear channels
- 32-320 Hz crossover range
- 12 dB/octave slope
Integrates with Factory and Aftermarket Stereos
Speaker-level and low-level inputs make it easier to add this amplifier to a wide range of car audio systems. The input level control also adjusts sensitivity for either signal type, which helps match the amplifier to the source unit.
- High- and low-level inputs
- Preamp and speaker-level inputs
- Input sensitivity: 200mVrms to 2.0 Vrms with low-level inputs
- Input sensitivity: 2Vrms to 20Vrms with high-level inputs
- 4 bare wire-to-RCA adapters included
Expand Your System Without Splitters
Full-range preamp outputs support multi-amplifier setups, therefore you can feed an additional amplifier without using splitters. This keeps system expansion straightforward when you plan to add more channels later.
- Full-range preamp outputs
- Feeds an additional amplifier without using splitters
Maintains Clean Signal at High Output Levels
Balanced Differential Inputs help keep noise and distortion low, even at high output levels. They also make the amplifier far less susceptible to line-induced engine noise, which helps preserve cleaner sound in the vehicle.
- Balanced Differential Inputs
- Low noise and distortion
- Reduced susceptibility to line-induced engine noise
Protection Circuitry for Everyday Use
On-board circuitry monitors for common fault conditions to help protect the amplifier during operation. An LED indicator shows when one of these conditions exists, so you have a clear status check at a glance.
- Protection from shorts
- Protection from high temperature
- Protection from overvoltage and undervoltage
- LED status indicator
- 30A x 2 fuse rating
Frequently Asked Questions
-
Can this amplifier work with a factory car stereo?
Yes. Speaker-level inputs allow it to integrate with factory car stereo systems, and it also accepts low-level inputs for aftermarket systems.
-
Can I use it for a subwoofer setup instead of four speakers?
Yes. You can bridge it to 2-channel mode to drive a couple of subs with 200 watts RMS, or use 3-channel mode to power a pair of full-range speakers and a subwoofer.
-
How does it help with system tuning?
It includes separate variable high-pass and low-pass crossovers on the front and rear channels, with a 32-320 Hz range and a 12 dB/octave slope.
-
Can I add another amplifier later?
Yes. Full-range preamp outputs let you feed an additional amplifier without using splitters.
Add the JBL Club A754 car amplifier to your cart to bring flexible 4-channel power and precise tuning control to your vehicle audio system. Contact or visit Gibbys Electronic Supermarket for expert advice on matching amplifiers, speakers, and subwoofers for your next car audio upgrade.
