NorStone NORSTY1 Stylum 1 19.7" Premium Metal Speaker Stands - Pair

NorStone NORSTY1 Stylum 1 19.7" Premium Metal Speaker Stands - Pair

NorStone Stylum 1 stands provide a solid 19.7"/500mm platform for bookshelf or compact floor speakers, combining rigid steel construction with fully adjustable spikes to help listeners hear tighter, cleaner bass from their system.

Designed by an audiophile, built for real-world rooms

The Stylum range was created by a seasoned enthusiast who understands that speaker placement is as important as driver quality. Every element—from the powder-coated steel columns to the dual sets of spikes—serves a purpose: to couple the loudspeaker to the floor while isolating unwanted resonance. Because of this focused design, rooms that once sounded boomy can reveal bass lines with far better definition.

Why does 50 kg of load capacity matter?

Many modern bookshelf speakers tip the scales at 10 kg or more each, especially when featuring dense MDF cabinets or built-in amplification. A single NorStone Stylum 1 stand supports up to 50 kg, leaving a generous safety margin that avoids micro-vibrations caused by an overloaded platform. This extra headroom keeps mid-bass punch intact even when the volume rises.

Fine-tune height, tilt and cable routing in minutes

• Top and bottom adjustable spikes: Dial in level on uneven floors and angle the speaker fractionally toward the listening position if needed.
• Anti-slip pads included: For users who prefer decoupling over direct coupling, the supplied pads replace the upper spikes without adding height.
• Cable gland inside the column: Feed speaker wire discreetly through the stand to keep installations tidy and free of snags.
• 165 × 200 mm (6.5 x 7.9") top plate: Suits most compact speakers; the slightly oversized base plate (220 × 250 mm / 8.7 x 9.8") enhances stability.

Will these stands integrate with existing décor?

The NorStone Stylum 1 is available in black satin, white satin, or a two-tone black satin/oak finish. The matte powder coat resists fingerprints while blending with both contemporary and traditional interiors. At 19.7" tall—roughly ear height for a seated listener—the stands disappear sonically while the speakers perform at their intended axis.

FAQs

1. Do the stands ship assembled? No, they arrive flat-packed in a single carton. All screws, Allen keys and an illustrated guide are supplied, and typical assembly time is under 15 minutes per stand.
2. Can floor spikes damage hardwood? The lower spikes are fitted with protective tailstocks. For additional peace of mind on hardwood or tile, many customers add optional coin-style discs under each spike.
3. My speakers are 180 mm wide. Will they fit the top plate? Yes. The 165 mm width measurement refers to the flat surface; as long as the speaker’s feet or base sit fully on that surface, stability is assured. A small overhang of the cabinet walls is common and does not compromise safety.
4. Is sand filling recommended? The central column is sealed, so it cannot be filled. Instead, Norstone relies on thick-gauge steel to achieve the necessary mass and stiffness.
5. How should the cable gland be used? Run the speaker cable up through the base opening, out of the slot beneath the top plate, and connect it directly to the speaker terminals. This keeps wiring hidden and removes strain from the connectors.

Give your speakers the foundation they deserve—add the NorStone Stylum 1 stands to your cart now and hear what controlled support can do for bass clarity and stereo imaging. Prefer to discuss room layout or finish options first? Call or visit Gibbys Electronic Supermarket to speak with a system expert today.