Sanus VSF817-B3 Advanced Full-Motion TV Wall Mount 19"-43" - Black

Sanus VSF817-B3 Advanced Full-Motion TV Wall Mount 19"-43" - Black

This single-stud Sanus VSF817-B3 Advanced Full-Motion Tv wall mount combines full-motion flexibility with a unique post-install height adjustment, making it a smart solution when a small to mid-size TV must clear outlets, décor, or a soundbar.

Fine-tune height even after the TV is on the wall

The Shift mechanism adds up to 4 inches of vertical travel long after the lag bolts are sunk. A drop-down handle hides neatly behind the screen; pull it, raise or lower the display, then release it to lock the position. This extra adjustability is helpful when wall plates, mantels, or an unexpected mis-measurement threaten to block the perfect sight line.

FluidMotion™ engineering delivers effortless swivel, tilt, and extension

Inside the steel arms, low-friction bushings keep motion smooth and predictable. The screen glides 17 inches away from the wall, swivels 45 degrees left or right, and tilts 5 degrees up or 7 degrees down—plenty of range to tame window glare or aim the picture toward an adjacent seating area. Once set, Steady Set™ technology resists drift, so the TV stays exactly where it is placed.

A low-profile look that respects today’s slim displays

When pushed back, the VSF817-B3 sits just 1.8 inches from the wall, almost flush with many modern panels. Cable channels along both arms corral power and HDMI leads, keeping the focus on the picture instead of dangling wires. The black, powder-coated frame echoes the finish of most TV bezels and blends easily with surrounding décor.

Engineered strength you can trust

Sanus subjects every VSF817-B3 to UL safety tests at four times its 40-pound rating. The single-stud plate supports VESA patterns from 75 x 75 up to 200 x 200, covering most 19- to 43-inch TVs on the market. Because the extension arms share the load across the entire frame, movement feels solid yet controlled.

Frequently asked questions

• Will this mount fit my 32-inch TV?

  If the set weighs 40 pounds or less and its VESA pattern is anywhere between 75 × 75 and 200 × 200 mm, the VSF817 is a match.

• How far does the TV pull away from the wall?

  At full reach the screen sits 17 inches (43.18 cm) out—enough room to swivel toward an adjoining room or plug in cables without removing the TV.

• Can I adjust the height after everything is cabled up?

  Yes. The Shift handle is accessible behind the panel, so raising or lowering the screen by up to 4 inches takes seconds and does not disturb wiring.

• What tools should I have on hand?

  A stud finder, level, Phillips screwdriver, tape measure, and an electric drill with 1/4- and 3/8-inch bits cover the job for typical drywall-over-stud installations.

Ready to reclaim desk or cabinet space and dial in the perfect viewing angle? Add the Sanus VSF817-B3 full-motion mount to your cart now. For tailored advice on pairing it with a soundbar or selecting the ideal cable run, call or visit Gibbys Electronic Supermarket and speak with an expert today.