JL Audio ACS110LG-TW1 10" 400 Watt .25 Ohm Powered Subwoofer – #93334

JL Audio ACS110LG-TW1 # 93334 PowerWedge+ 10" powered subwoofer

ACS110LG-TW1 Amplified Subwoofer System with Single 10TW1-0.25 Subwoofer, Built-In 400W Class D Amplifier, Black Carpet - Sealed Enclosure

In PowerWedge+ systems, the power is built right into the subwoofer system. Housing a proprietary Class D amplifier, this subwoofer system employs our exclusive DCD™ amplifier technology to extract maximum output from its specially engineered, ultra low-impedance TW1 driver. By combining direct power conversion with an ultra-high current output section, DCD amplifiers are free of conventional switching power supplies, enabling them to generate remarkable power with unprecedented efficiency.

Harnessing the performance and insanely small box requirements of the TW1 Subwoofer, this subwoofer system is designed to deliver amazing sub-bass from an enclosure that is only 5 inches (127 mm) deep. Its low-profile enclosure design has been carefully engineered to the optimum sealed enclosure alignment for the 10TW1 driver and has been fine-tuned through extensive real-world listening.

Integration to OEM and aftermarket head units is a snap thanks to a variety of input options and automatic turn-on capability (via signal sensing or DC offset sensing). Also included is a variable frequency low-pass filter (50-200 Hz), along with output polarity control switch. Adding an optional RBC-1 remote level control (sold separately) lets you control subwoofer levels directly from the driver’s seat. A quick-disconnect power connector makes it easy to remove the subwoofer when you need the extra space.

Engineered for performance

JL Audio's ACS110LG-TW1 PowerWedge+ powered subwoofer delivers the impressive bass you expect from JL Audio without taking up a lot of space. The compact PowerWedge+ enclosure houses a built-in Class D amplifier that safely sends 400 watts RMS to the specially engineered, ultra-low-impedance TW1 10" subwoofer.

Made in USA

JL Audio uses state-of-the-art automated woodworking equipment to fabricate the high-quality MDF enclosure with rugged automotive carpeting, a steel-mesh grille, 5-way binding posts, and solid internal wiring. The enclosure and subwoofer are constructed at the manufacturing facility in Florida to ensure that you get the bass that you expect from JL Audio.

Small enclosure, big sound

The specially designed, sealed enclosure measures just over 5 inches thick, so it'll fit just about anywhere. You'll enjoy thick low-frequency response from all of your music with this capable enclosure in your vehicle. And you can easily remove the power connector from this sub, so you can pull it out of your vehicle when you need a little extra space.

ACS110LG-TW1 Physical Specifications:

ACS110LG-TW1 Features

Overview: The ACS110LG-TW1 PowerWedge+ is a compact powered subwoofer, useful in vehicles with limited space. The sealed enclosure is loaded with one 10TW1-0.25 10" low impedance subwoofer (0.25?) and a 400 watt RMS class-D amplifier. The amp uses JL Audio's exclusive DCD amplifier technology, combining direct power conversion (no conventional switching power supply) with an ultra-high current output section. The result is an efficient design (91-94%) with very little heat generated.

Enclosure Design: The enclosure features MDF (medium-density fiberboard), constructed using CNC woodworking equipment, and covered with high-grade automotive carpeting. The driver is protected by a black steel-mesh grille.

Power/Ground Plug: The power, ground, and remote turn-on wires attach to a removable terminal block; easily unplugged so the subwoofer can be removed when you need more storage space. Each terminal is a screw clamp that will accept up to 8 gauge wire (minimum 8 gauge power and ground recommend).

Audio Inputs: The amplifier section will accept either a line level (RCA) or speaker level signal. A 12" speaker level input harness is included.

Remote Level Control: An optional RBC-1 wired Remote Bass Control (sold separately) allows bass level adjustment from the front of your vehicle.

Controls:

• Input Sensitivity: rotary control; variable from 70 mV to 1.4 V for the RCA inputs and 280 mV to 5.4 V for the speaker level inputs
• Turn-On Mode: three position switch:
  • REM: amp turns on when +12 volts DC is applied to the remote terminal
  • DC: the amp turns on when a DC offset voltage is detected on the speaker level inputs
  • Signal: the amp turns on when an audio signal is detected on the speaker level inputs, turns off after 30 seconds without an input signal
• Crossover: rotary control; the crossover point is continuously variable from 50 Hz to 200 Hz; the slope is 12 dB/octave and the low-pass crossover is always engaged
• Polarity: two position switch; allows you to reverse the phase of the subwoofer (0°, 180°)

Protection Circuit: The amp is equipped with thermal protection circuit; it will shut down if it overheats.