Specifications
General
– Unit (W x D x H): 434 x 410 x 135mm, 17.1 x 16.1 x 5.3in
– Cabinet Size (W x D x H): 434 x 374 x 135mm, 17.1 x 14.7 x 5.3in
– Net weight: 17.6kg, 38.8lb
– Packaging Dimensions (W x D x H): 548 x 520 x 249mm, 21.6 x 20.5 x 9.8in
– Packaging gross weight: 20.4kg, 45lb
– Carton Color: 2 Color
– Cushion / Packing: 4 Separate / Sheet
– Panel Color: SP / BK
– Front (Center) Panel: Aluminum
– Side cover: SECC with 4 straight emboss
– Side screw: SP: Nickel / BK: Black
– Rear Panel: SECC t1.0mm
– Chassis Material: SECC t1.2mm
– Bottom Layer: Single
– Volume Knob: Aluminum
– Input Selector: Aluminum
– Bass/Treble/Balance/ Phono Sel knobs: Aluminum
– Power button: Aluminum
– Other knob/button (LOUDNESS, SOURCE DIRECT etc): Mold (Source Direct,Analog Mode,MM/MC)
– Foot: ABS resin with rigid rib w/Hot stamp (H : 20mm)
– Heatsink for Power Amplifier: Extruded Aluminum
Specifications
– Rated Output Power: 70W + 70W (8ohm,20Hz-20kHz,THD0.07%), 140W + 140W (4ohm, 1kHz, THD0.7%)
– Speaker Impedance: A or B : 4 ~ 16ohm, A + B : 8 ~ 16ohm
– Frequency Response: 5Hz – 100kHz (0~ -3dB)
– Total Harmonic Distortion: 0.01 % (Rated output: –3 dB),
– 8 ohm/ohms: 1 kHz
– Dumping Factor: 100 and over
– Input Sensitivity: Phono input: MM: 2.5 mV / 47 kohm, MC: 200
– RIAA Deviation: 20 Hz – 20 kHz ±0.5 dB (MM/MC)
– Phono Maximum Input: MM : 130mV / 1kHz MC : 10mV / 1kHz
– Input Sensitivity: CD/LINE/RECORDER: 125 mV / 19 kohm
– Input Sensitivity: Power Amp input: 0.85V / 47kohm (EXT. PRE)
– Signal to Noise Ratio: PHONO (MM): (89dB), PHONO (MC): (74dB), CD: (107dB)
– Tone Control: BASS : 100Hz ±8dB, TREBLE : 10kHz ±8dB
– Power Consumption: 295W at Standby: 0.2W TV autoplay off, 0.4W TV autoplay on
Audio Feature
– Power Amplifier Circuit: New UHC-MOS, Single Push Pull (7)
– Power Trans: Dual El Core
– Pre Amplifier Circuit: Variable Gain Preamplifier (OP AMP)
– Volume: Electric (MUSES 72323)
– Bass / Treble / Mid / Balance Control: Yes / Yes / No / Yes
– Type of Tone Control: Electric, Controlled by Potentiometer
– Headphone Circuit: Use Poweramplifier
– Source Direct: Yes
– Analog Amp Mode: Yes (button on front panel)
– Other: 70
– DAC Circuit: PCM1795
– Digital Filter: Fixed
– Digital Processing: Advanced AL32 Processing Plus
– DAC Master Clock Design (Not Support Network Playback): Yes
– Asyncronous mode (for USB-B input): yes
– Isolator (for USB-B input): Yes, Full Isolation
Connectivity
– Phono Input: Yes (MM / MC) *default=MM
– Analog Input (include Phono) / REC Out (RCA): 4/1, (PHONO / CD / NETWORK ,AUX/ RECORDER)
– Optical input / output (Maximum Support): 2 / 0 (192kHz/24bit)
– Coaxial input / output (Maximum Support): 1 / 0 (192kHz/24bit)
– Ext. Pre Input (Power Amp Direct): Yes(Ext.Pre)
– 2 sets of Speaker Output: Yes (Bi-wiring)
– Speaker Terminal: Gold Plated
– Headphone Output: 1 (Turn off the speaker when inserting headphone)
– Remote Control Bus Terminal: Yes (mini)
– AC Inlet: Yes
– Wi-Fi: No
– HEOS: No
– USB B (USB DAC): 1 (Rear)
– Module or Main Device: New XMOS (XU210-256-TQ128 )
– PCM Sample Rate: ~384kHz/32bit
– DSD Audio Streaming (DoP): ~11.2MHz
– Roon Certification: Yes(Roon Tested)
Color
Black
Amplifier - DAC
Yes
Amplifier Channels
2
Watts Per Channel
51 to 150w
Receivers - Ports
Audio In, Audio Out, Digital Audio In, Phono Input, Remote Control In / Out, Signal GND, USB-DAC