Better Than Prime Deals

Up To 70%* Off!

We're here to help! +1 (866) 696-7189

  • Fast & Free Shipping

    for Most Orders

  • Lowest Price

    Guarantee

  • Knowledgeable

    Customer Service

  • Best Selection

    in Canada

JL Audio ACP110LG-TW1 10" 400 Watt .25 Ohm Powered Subwoofer – #93332

Product Descriptions

JL Audio ACP110LG-TW1 #93332 MicroSub+ Single 10" Powered Subwoofer

ACP110LG-TW1 Amplified Subwoofer System with Single 10TW1-0.25 Subwoofer, Built-In 400W Class D Amplifier, Black Carpet - Ported Enclosure

With MicroSub+ systems, the power is built right into the subwoofer system. Housing a proprietary Class D amplifier, this incredible subwoofer system utilizes our exclusive DCD amplifier technology to extract maximum output from its specially engineered, ultra low-impedance TW1 driver. By combining direct power conversion with an ultra-high current output section, DCD amplifiers are free of conventional switching power supplies, enabling them to generate remarkable power with unprecedented efficiency.

Key to the enclosure’s performance is its efficient slot-ported design and precise tuning of its 10TW1 Subwoofer. Extensive interior bracing permits the use of thinner wall material that maximizes the enclosure's internal volume relative to its exterior volume. The port wraps around two walls of the enclosure to produce the necessary low tuning frequency that ensures excellent extension and response smoothness. The flared port entry and exit further enhance sound quality by minimizing air-flow noises through the port.

Integration to OEM and aftermarket head units is a snap thanks to a variety of input options and automatic turn-on capability (via signal sensing or DC offset sensing). Also included is a variable frequency low-pass filter (50-200 Hz), along with output polarity control switch. Adding an optional RBC-1 remote level control (sold separately) lets you control subwoofer levels directly from the driver’s seat. A quick-disconnect power connector makes it easy to remove the subwoofer when you need the extra space. As with all MicroSub™ systems, these amplified versions produce the kind of output and extension normally associated with much larger systems.

Engineered for performance

JL Audio's ACP110LG-TW1 MicroSub+ powered subwoofer delivers the impressive bass you expect from JL Audio without taking up a lot of space. The compact MicroSub+ enclosure houses a built-in Class D amplifier that safely sends 400 watts RMS to the specially engineered, ultra-low impedance TW1 10" subwoofer.

Made in USA

JL Audio uses state-of-the-art automated woodworking equipment to fabricate the high-quality MDF enclosure with rugged automotive carpeting, a steel-mesh grille, 5-way binding posts, and solid internal wiring. The enclosure and subwoofer are constructed at the manufacturing facility in Florida to ensure that you get the bass that you expect from JL Audio.

Small enclosure, big sound

The specially designed, slot-ported enclosure measures just over 5 inches thick, so it'll fit just about anywhere. Its flared slot-port design cuts down on air turbulence and keeps your bass rich and clear. You'll enjoy thick low-frequency response from all of your music with this capable enclosure in your vehicle. And you can easily remove the power connector from this sub, so you can pull it out of your vehicle when you need a little extra space.

ACP110LG-TW1 Physical Dimensions:

External Width (W) 21 in / 533 mm
External Height (H) 13.5 in / 343 mm
External Depth (D) 6.625 in / 168 mm
Net Weight 25.0 lb / 11.34 kg

Features

Overview: The ACP110LG-TW1 MicroSub+ is a compact powered subwoofer, useful in vehicles with limited space. The ported enclosure is loaded with one 10TW1-0.25 10" low impedance subwoofer (0.25?) and a 400 watt RMS class-D amplifier. The amp uses JL Audio's exclusive DCD amplifier technology, combining direct power conversion (no conventional switching power supply) with an ultra-high current output section. The result is an efficient design (91-94%) with very little heat generated.

Enclosure Design: The enclosure features MDF (medium-density fiberboard), constructed using CNC woodworking equipment, and covered with high-grade automotive carpeting. The driver is protected by a black steel-mesh grille. The port and amplifier panel are both on the same side of the enclosure.

Flared Port: The enclosure has a side-firing flared slot-port. The flared slot-port design minimizes turbulence and improves fidelity. The port is approximately 2-1/4" x 5-3/8" at the opening.

Power/Ground Plug: The power, ground, and remote turn-on wires attach to a removable terminal block; easily unplugged so the subwoofer can be removed when you need more storage space. Each terminal is a screw clamp that will accept up to 8 gauge wire (minimum 8 gauge power and ground recommend).

Audio Inputs: The amplifier section will accept either a line level (RCA) or speaker level signal. A 12" speaker level input harness is included.

Remote Level Control: An optional RBC-1 wired Remote Bass Control (sold separately) allows bass level adjustment from the front of your vehicle.

Controls:

  • Input Sensitivity: rotary control; variable from 70 mV to 1.4 V for the RCA inputs and 280 mV to 5.4 V for the speaker level inputs
  • Turn-On Mode: three position switch:
    • REM: amp turns on when +12 volts DC is applied to the remote terminal
    • DC: the amp turns on when a DC offset voltage is detected on the speaker level inputs
    • Signal: the amp turns on when an audio signal is detected on the speaker level inputs, turns off after 30 seconds without an input signal
  • Crossover: rotary control; the crossover point is continuously variable from 50 Hz to 200 Hz; the slope is 12 dB/octave and the low-pass crossover is always engaged
  • Polarity: two position switch; allows you to reverse the phase of the subwoofer (0°, 180°)

Protection Circuit: The amp is equipped with thermal protection circuit; it will shut down if it overheats.

Documents

Warranty

JL Audio 2 Year Limited Warranty

SKU: ACP110LG-TW1 UPC: 699440933322
$1,099.95
or

Payment as low as

$91.66/mo
Info icon

This monthly payment does not include any applicable tax or interest

Flash Sale Ends:

Free ShippingFree Shipping |

Lowest Price GuaranteeLowest Price Guarantee*

Limited Quantities
  • 10″ subwoofer in ported enclosure
  • woofer impedance: 0.25 ohms
  • built-in Class D amplifier delivers 400 watts RMS at 0.25 ohms
  • recommended power/ground wiring gauge: 8 AWG
  • fuse rating: 30 A

Phone icon

Call 1-866-696-7189

Call for Expert AdviceCall for Expert Advice
Info icon

Does not apply to special order items.

30-day Return Policy
Lowest Price Guarantee*

Product Descriptions

JL Audio ACP110LG-TW1 #93332 MicroSub+ Single 10" Powered Subwoofer

ACP110LG-TW1 Amplified Subwoofer System with Single 10TW1-0.25 Subwoofer, Built-In 400W Class D Amplifier, Black Carpet - Ported Enclosure

With MicroSub+ systems, the power is built right into the subwoofer system. Housing a proprietary Class D amplifier, this incredible subwoofer system utilizes our exclusive DCD amplifier technology to extract maximum output from its specially engineered, ultra low-impedance TW1 driver. By combining direct power conversion with an ultra-high current output section, DCD amplifiers are free of conventional switching power supplies, enabling them to generate remarkable power with unprecedented efficiency.

Key to the enclosure’s performance is its efficient slot-ported design and precise tuning of its 10TW1 Subwoofer. Extensive interior bracing permits the use of thinner wall material that maximizes the enclosure's internal volume relative to its exterior volume. The port wraps around two walls of the enclosure to produce the necessary low tuning frequency that ensures excellent extension and response smoothness. The flared port entry and exit further enhance sound quality by minimizing air-flow noises through the port.

Integration to OEM and aftermarket head units is a snap thanks to a variety of input options and automatic turn-on capability (via signal sensing or DC offset sensing). Also included is a variable frequency low-pass filter (50-200 Hz), along with output polarity control switch. Adding an optional RBC-1 remote level control (sold separately) lets you control subwoofer levels directly from the driver’s seat. A quick-disconnect power connector makes it easy to remove the subwoofer when you need the extra space. As with all MicroSub™ systems, these amplified versions produce the kind of output and extension normally associated with much larger systems.

Engineered for performance

JL Audio's ACP110LG-TW1 MicroSub+ powered subwoofer delivers the impressive bass you expect from JL Audio without taking up a lot of space. The compact MicroSub+ enclosure houses a built-in Class D amplifier that safely sends 400 watts RMS to the specially engineered, ultra-low impedance TW1 10" subwoofer.

Made in USA

JL Audio uses state-of-the-art automated woodworking equipment to fabricate the high-quality MDF enclosure with rugged automotive carpeting, a steel-mesh grille, 5-way binding posts, and solid internal wiring. The enclosure and subwoofer are constructed at the manufacturing facility in Florida to ensure that you get the bass that you expect from JL Audio.

Small enclosure, big sound

The specially designed, slot-ported enclosure measures just over 5 inches thick, so it'll fit just about anywhere. Its flared slot-port design cuts down on air turbulence and keeps your bass rich and clear. You'll enjoy thick low-frequency response from all of your music with this capable enclosure in your vehicle. And you can easily remove the power connector from this sub, so you can pull it out of your vehicle when you need a little extra space.

ACP110LG-TW1 Physical Dimensions:

External Width (W) 21 in / 533 mm
External Height (H) 13.5 in / 343 mm
External Depth (D) 6.625 in / 168 mm
Net Weight 25.0 lb / 11.34 kg

Features

Overview: The ACP110LG-TW1 MicroSub+ is a compact powered subwoofer, useful in vehicles with limited space. The ported enclosure is loaded with one 10TW1-0.25 10" low impedance subwoofer (0.25?) and a 400 watt RMS class-D amplifier. The amp uses JL Audio's exclusive DCD amplifier technology, combining direct power conversion (no conventional switching power supply) with an ultra-high current output section. The result is an efficient design (91-94%) with very little heat generated.

Enclosure Design: The enclosure features MDF (medium-density fiberboard), constructed using CNC woodworking equipment, and covered with high-grade automotive carpeting. The driver is protected by a black steel-mesh grille. The port and amplifier panel are both on the same side of the enclosure.

Flared Port: The enclosure has a side-firing flared slot-port. The flared slot-port design minimizes turbulence and improves fidelity. The port is approximately 2-1/4" x 5-3/8" at the opening.

Power/Ground Plug: The power, ground, and remote turn-on wires attach to a removable terminal block; easily unplugged so the subwoofer can be removed when you need more storage space. Each terminal is a screw clamp that will accept up to 8 gauge wire (minimum 8 gauge power and ground recommend).

Audio Inputs: The amplifier section will accept either a line level (RCA) or speaker level signal. A 12" speaker level input harness is included.

Remote Level Control: An optional RBC-1 wired Remote Bass Control (sold separately) allows bass level adjustment from the front of your vehicle.

Controls:

  • Input Sensitivity: rotary control; variable from 70 mV to 1.4 V for the RCA inputs and 280 mV to 5.4 V for the speaker level inputs
  • Turn-On Mode: three position switch:
    • REM: amp turns on when +12 volts DC is applied to the remote terminal
    • DC: the amp turns on when a DC offset voltage is detected on the speaker level inputs
    • Signal: the amp turns on when an audio signal is detected on the speaker level inputs, turns off after 30 seconds without an input signal
  • Crossover: rotary control; the crossover point is continuously variable from 50 Hz to 200 Hz; the slope is 12 dB/octave and the low-pass crossover is always engaged
  • Polarity: two position switch; allows you to reverse the phase of the subwoofer (0°, 180°)

Protection Circuit: The amp is equipped with thermal protection circuit; it will shut down if it overheats.

Documents

Warranty

JL Audio 2 Year Limited Warranty

JL Audio ACP110LG-TW1 10" 400 Watt .25 Ohm Powered Subwoofer – #93332

JL Audio ACP110LG-TW1 10" 400 Watt .25 Ohm Powered Subwoofer – #93332

$1,099.95

Key Points

  • 10″ subwoofer in ported enclosure
  • woofer impedance: 0.25 ohms
  • built-in Class D amplifier delivers 400 watts RMS at 0.25 ohms
  • recommended power/ground wiring gauge: 8 AWG
  • fuse rating: 30 A

Tags

N/A

Features

N/A

Type

Ported
View product